PIXMA G series MFP from Canon They are deservedly popular thanks to their continuous ink supply system and affordable printing costs. However, to ensure maximum efficiency, the device needs to be connected to a local network. This allows you to print documents and scan images from multiple devices simultaneously without having to constantly reconnect the USB cable.
The process of setting up a wireless connection on the model Canon G3411 This doesn't require in-depth knowledge of networking technologies, but it does require careful execution of the steps. In this guide, we'll cover all the nuances of pairing the printer with a router and mobile devices running Android and iOS, as well as important aspects of installing drivers on your computer.
Wireless printing opens up new opportunities for work and study, allowing you to manage tasks from anywhere in your home or office.
Preparing equipment and checking network settings
Before you begin software configuration, you need to make sure that your hardware is physically ready. Make sure that your router The router is turned on and broadcasting a Wi-Fi signal, and the printer itself is filled with ink and ready to use. An important requirement is that the router supports WPA/WPA2 security standards, which are the default on most home networks.
If you previously connected your printer to a different router or changed the Wi-Fi password, the old network profile on the device may conflict with the new connection. In this case, you'll need to reset the printer's network settings, which we'll explain below. It's also a good idea to know your network name (SSID) and password in advance, as you'll need them during the configuration process.
Canon G3411 It only works in the 2.4 GHz range, so make sure your router broadcasts the network in this frequency range.
⚠️ Important: If your router is distributing two networks with the same name (2.4 GHz and 5 GHz), temporarily disable the 5 GHz network in the router settings or make sure that your phone is connected to the 2.4 GHz network during setup.
Resetting the Canon G3411 Printer's Network Settings
To establish a clean connection, you often need to clear the device's memory of old connection profiles. In the control panel Canon G3411 There is no screen, so all operations are performed through button combinations. Press the button Wi-Fi and hold it until the power indicator flashes once.
Immediately after this, press the button Color (Color Printing) and then the button Wi-Fi again. Next, click the button Black (Black and white print) and the button again Wi-FiAfter this sequence, the power and Wi-Fi indicators should light up steadily, indicating that the device is ready to search for a network.
Now press the button Wi-Fi Press the power button once to enter setup mode. The power indicator should start blinking and the Wi-Fi indicator should stay on. This means the printer is in connection standby mode.
- 📶 The Wi-Fi indicator is on - setup mode is activated.
- 🔄 The Wi-Fi indicator is blinking - searching for a network or transferring data.
- ❌ The Wi-Fi indicator is not lit - the mode is not activated, repeat the procedure.
- ⚡ The power indicator is flashing quickly - a reset or update is in progress.
What to do if the indicators are flashing erratically?
If the LEDs are flashing in an odd pattern, you may have mistimed the keystroke interval. Wait 1-2 minutes for the printer to completely calm down, and then try the reset procedure again, maintaining the correct keystroke rhythm.
Using the Canon PRINT Inkjet/SELPHY app
The most reliable and functional way to connect Canon G3411 to your smartphone - use the official app Canon PRINT Inkjet/SELPHYIt's available for free download on the Google Play Market and Apple App Store. After installation, launch the app and allow location access, which is necessary for detecting devices on the Wi-Fi network.
In the app's main menu, click the add printer icon (usually a plus sign or a printer icon with an arrow). The app will prompt you to select a registration method. Select "Register Printer" and follow the on-screen prompts. The app will automatically find your MFP if it's in setup mode.
During setup, the app will ask you to select your home Wi-Fi network from a list and enter the password. After confirming your information, the configuration process will begin, which may take up to 2-3 minutes. During this time, keep the printer turned on and keep your smartphone close to the device.
☑️ Check before connection
Once the procedure is successfully completed, a registration message will appear on your smartphone screen, and the Wi-Fi indicator on the printer will light up steadily.
Alternative method: WPS connection
If your router supports the technology WPS (Wi-Fi Protected Setup), you can connect your printer without entering a password or using your smartphone initially. There should be a button labeled as such on the router. Press and hold the WPS button on the router for a few seconds until the WPS indicator starts blinking.
Then on the control panel Canon G3411 press and hold the button Wi-Fi until the power indicator flashes once. Then press the button Color, and then the button BlackThe Wi-Fi indicator should start blinking rapidly, indicating that it is searching for a WPS signal.
Within two minutes, the devices should find each other and automatically exchange encryption keys. A successful connection will be indicated by a steady glow of the Wi-Fi indicator on the printer.
| Parameter | WPS mode | Mode via the app |
|---|---|---|
| Speed of setup | High (automatic) | Average (manual input) |
| Password requirement | Not required | Input required |
| Router support | Required | Any router |
| Reliability | Depends on the router | Maximum |
⚠️ Note: Some internet providers or corporate routers may block the WPS function for security reasons. If automatic connection fails, use the app-based method.
Installing drivers on a computer via Wi-Fi
To fully utilize your PC, laptop, or netbook running Windows or macOS, you need to install software. Don't rely on standard Windows drivers, as they may not support all features. scanning and ink level monitoring. Download the full driver package from the official Canon website, selecting your model and operating system.
Run the installation file. During the installation process, the program will prompt you to select a connection type. Select "Wireless LAN connection." The installer will ask you to confirm the printer model and begin searching for the device on the network. If the printer was successfully connected to Wi-Fi via your smartphone, your computer should find it automatically.
If the automatic search does not return any results, select the "Specify Printer" option and enter the IP address of the device, which can be found by printing a network settings report (press the Wi-Fi button and the Stop/Reset button simultaneously for a few seconds).
After installing the drivers, it is recommended to perform a test print to ensure that data is transferred correctly over the network.
Troubleshooting connection issues
Even if you follow the instructions carefully, you may encounter difficulties. Often, the problem lies in the computer and printer being on different subnets, for example, if "Guest Mode" is enabled on the router. Make sure all devices are connected to the main network.
Another common reason is antivirus or a firewall on your computer that's blocking the detection of new devices on the network. Try temporarily disabling network protection or adding the printer to the exceptions list. Also, check if your router has MAC address restrictions.
If the Wi-Fi indicator on your printer is blinking slowly, it means the device is unable to connect to the router. Check the password you entered and the signal strength. If necessary, move the printer closer to the signal source.
- 🔍 Check if the Wi-Fi indicator is on steadily.
- 📡 Make sure your smartphone and printer are on the same network.
- 🔌 Restart your router and printer at the same time.
- 🛡️ Check your PC's firewall settings.
Frequently Asked Questions (FAQ)
Can the Canon G3411 be connected to a 5G Wi-Fi network?
No, model Canon G3411 Only supports 802.11b/g/n Wi-Fi in the 2.4 GHz band. If your router only broadcasts 5G, the printer won't see the network. You'll need to enable 2.4 GHz network broadcasting in your router settings.
How to find a printer's IP address without a computer?
Press and hold the button Wi-Fi on the printer's control panel until the power light flashes once. Then press the button Color, then Black, then again Wi-FiThe printer will print a report indicating the IP address.
Why can't my computer see my printer via Wi-Fi?
Most often, the computer and printer are connected to different networks (for example, one via cable, the other via a guest's Wi-Fi). Make sure both devices are on the same local network and have the correct IP addresses.
Do I need a USB cable for the initial Wi-Fi setup?
For the model G3411 A USB cable is optional. Setup can be done completely wirelessly via a smartphone app or using WPS if your router supports it.