Connecting the ASUS VivoBook S15 to Wi-Fi: All the Methods from A to Z

Laptop ASUS VivoBook S15 — a popular model among users who value the combination of performance and compactness. However, even with such a device, difficulties can arise when first connecting to a wireless network. Most often, problems are not related to hardware issues, but to incorrect settings. Wi-Fi adapter, drivers, or a router. In this article, we'll cover all possible connection methods—from the basic Windows control panel to manually configuring network settings.

It is important to understand that the connection algorithm may differ slightly depending on the version Windows (10 or 11) installed on your VivoBook S15The current state of the network adapter drivers and the router configuration also affect the process. If you've previously connected to other networks but now don't see the one you need, check to see if the adapter is disabled. Device Manager or is the hidden network mode enabled on the router (SSID hiding).

Before you begin setting up, make sure that:

  • 📶 The router is turned on and distributing Wi-Fi (the wireless network indicator is on or flashing).
  • 🔌 The laptop is charged or connected to the power supply - a sudden power outage during driver installation can lead to failures.
  • 🔑 You have a Wi-Fi password (if the network is secured).
📊 What kind of router do you have?
TP-Link
ASUS
Xiaomi
D-Link
Another

1. Basic connection via Windows panel

The easiest way is to use the operating system's built-in tools. This method works if the Wi-Fi adapter drivers are already installed and the network is visible in the list of available networks.

Instructions for Windows 10/11:

  1. Click the network icon in the lower right corner of the taskbar (next to the clock). It looks like this: signal ladder or globe (if there is no connection).
  2. In the list that opens, find the name of your Wi-Fi network (SSID). If it is not there, see the section “What to do if the network is not displayed”.
  3. Click on the network name and press Connect.
  4. Enter the password (if required) and confirm the connection.

If an error appears after entering the password "Unable to connect to this network", check:

  • 🔤 Make sure the password you entered is correct (case sensitive!).
  • 🔄 Router operating mode: some older devices do not support WPA3 - try switching the network to WPA2-PSK in the router settings.
  • 📡 Distance to the router: If the signal is too weak, the laptop may not be able to establish a connection.

2. Connecting via Windows Settings

An alternative way is to use the section Parameters (or Settings (in Windows 11). This is useful if the network icon on the taskbar is not visible or does not respond to clicks.

For Windows 10:

  1. Click Win + Ito open Parameters.
  2. Go to Network and Internet → Wi-Fi.
  3. Turn on the slider Wi-Fi (if it is turned off).
  4. On the list Attractions of the network select your network and click Connect.

For Windows 11 the path has changed a little:

  1. Win + I → Network and Internet → Wi-Fi.
  2. Activate the switch Wi-Fi.
  3. Click Show available networks and choose yours.

If you see the inscription in this section "No connections available", the problem may be a disabled adapter or missing drivers. Proceed to the "Checking Drivers and Hardware" section.

Check if Wi-Fi is enabled on your laptop (press Fn+F2)

Make sure the router is distributing the network (the Wi-Fi indicator is on)

Reboot your router (turn it off for 30 seconds)

Try connecting another device to this network (phone, tablet)

-->

3. Enabling Wi-Fi on the ASUS VivoBook S15

On some models ASUS VivoBook S15 The wireless adapter can be disabled using hardware—either a keyboard shortcut or a physical switch. If Wi-Fi doesn't turn on in Windows, check these items.

Hardware activation methods:

  • 🔑 Keyboard shortcut: press Fn + F2 (on some models - Fn + F12). On the key F2 there is usually an antenna icon 📶.
  • 🔄 Physical switch: There may be a small slider on the side of your laptop (rarely found on newer models).
  • 🖥️ In BIOS: If Wi-Fi is disabled at the firmware level, it must be enabled in the BIOS settings (see the next section).

After pressing Fn + F2 The wireless network indicator (usually on the front of the laptop or near a key) should light up. If the indicator doesn't respond:

  • Try holding Fn longer (sometimes the key responds with a delay).
  • Check if the function key is locked in BIOS.
  • Update your keyboard driver via device Manager.
What to do if the Fn key does not work?

If the Fn+F2 combination does not work, the function key may be disabled in the BIOS or a driver may be required. ATK Package (ASUS hotkey management utility). Download it from the [official ASUS website](https://www.asus.com), selecting your laptop model.

4. Checking drivers and hardware

If Wi-Fi won't turn on either through Windows or the keyboard, the problem may be with the drivers or the adapter itself. Let's look at how to diagnose and fix this.

Step 1: Check in Device Manager

  1. Click Win + X and select device Manager.
  2. Expand the section Network adapters.
  3. Find the device with the names Wireless, Wi-Fi or Network Controller (For example, Intel Wi-Fi 6 or Qualcomm Atheros).
  4. If there is an exclamation mark next to the adapter ⚠️, right-click on it and select Update driver.

Step 2: Reinstall the driver

If the update did not help:

  1. Download the latest driver from official ASUS website, specifying the model VivoBook S15.
  2. IN Device Manager remove the current adapter (right click → Remove device).
  3. Install the downloaded driver and restart your laptop.

Step 3. Check in BIOS

If the adapter is not displayed in Device Manager It's possible that it's disabled in the BIOS:

  1. Restart your laptop and press F2 or Del (depending on the model) to enter BIOS.
  2. Find the section Advanced → Onboard Devices Configuration (or similar).
  3. Make sure the parameter Wireless LAN or Wi-Fi installed in Enabled.
  4. Save changes (F10) and reboot.

5. Manual connection to a hidden network

Some routers are configured not to broadcast the network name (SSID). In this case VivoBook S15 won't see it in the list of available ones, but you can connect manually.

Instructions for Windows 10/11:

  1. Open Settings → Network and Internet → Wi-Fi.
  2. Click Managing known networks (in Windows 11 - Managing Wi-Fi networks).
  3. Select Add a new network.
  4. Enter:
    • Network Name (SSID) — the exact name, including case.
    • Security type: normal WPA2-Personal or WPA3-Personal.
    • Password.
  • Check the box Connect automatically and save.
  • If you don't know the exact network name or security type, check your router settings:

    • Connect your laptop to the router via cable (Ethernet).
    • Open your browser and type in the address bar 192.168.1.1 or 192.168.0.1 (the address may differ - see the sticker on the router).
    • Log in (the default login and password are often admin/admin).
    • Find the section Wireless or Wi-Fi — there will be SSID and encryption type.

    6. Diagnosing connection problems

    If your laptop sees the network but doesn't connect—or the connection keeps dropping—use Windows' built-in diagnostic tools.

    Run the troubleshooter:

    1. Open Settings → Network & Internet → Status.
    2. Scroll down and click Network troubleshooter.
    3. Follow the wizard's instructions. It will automatically check:
      • 🔌 Adapter status.
      • 🔄 IP settings (DHCP).
      • 🔒 Compatibility of security protocols.

    Manually check IP settings:

    If the diagnostics don't help, try manually setting the IP address:

    1. Open Control Panel → Network and Internet → Network and Sharing Center.
    2. Click on the Wi-Fi connection and select Properties.
    3. Find Internet Protocol version 4 (TCP/IPv4) and press Properties.
    4. Install:
      • IP address: 192.168.1.X (where X is a number from 2 to 254, not occupied by other devices).
      • Subnet mask: 255.255.255.0.
      • Default gateway: 192.168.1.1 (or your router's address).
      • DNS: 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare).

    Common causes of unstable connection:

    Problem Cause Solution
    Constant breaks Weak signal or interference Move the router closer or change the Wi-Fi channel in the settings (from 2.4 GHz to 5 GHz or vice versa)
    "No internet access" IP is not assigned (DHCP problem) Reboot your router or set the IP manually (see above)
    Slow speed Network congestion Disconnect unnecessary devices and change the Wi-Fi standard to 802.11ac (in the router settings)
    Doesn't connect to 5GHz The adapter does not support the range Check the adapter specifications in Device Manager or use 2.4 GHz
    How to check which Wi-Fi standard your adapter supports?

    Open Device Manager → Network Adapters, right-click on your Wi-Fi adapter and select Properties → AdvancedIn the list of parameters, find Wireless Mode - the supported standards will be indicated there (for example, 802.11a/b/g/n/ac).

    7. Alternative connection methods

    If Wi-Fi is on ASUS VivoBook S15 If it doesn't work despite all your efforts, consider temporary alternatives:

    1. Connection via cable (Ethernet)

    • 🔌 Use an adapter USB-to-Ethernet, if your laptop does not have an RJ-45 port.
    • 🔄 Connect the router cable to your laptop. This will provide stable internet access for updating drivers.

    2. Sharing Wi-Fi from your phone

    • 📱 Turn on access point on a smartphone (Android/iOS).
    • 🔗 Connect your laptop to the created network - this will help you temporarily access the Internet.

    3. USB Wi-Fi adapter

    • 🖧 Buy an external one USB Wi-Fi adapter (For example, TP-Link TL-WN725N).
    • 🔧 Connect it to your laptop and install the drivers - this will bypass the problem with the built-in module.

    4. Reset Windows network settings

    If problems started after a system update, try resetting the network stack:

    1. Open Settings → Network & Internet → Status.
    2. Scroll down and click Network reset.
    3. Confirm the action and restart the laptop.

    8. Common mistakes and their solutions

    Let's look at typical error messages and how to fix them.

    Error: "Unable to connect to this network"

    • 🔑 Check your password (it may have changed after resetting the router).
    • 🔄 Restart your router and laptop.
    • 📡 Try connecting to a different network (for example, from your phone) to rule out a problem with the adapter.

    Error: "The network adapter does not have valid IP configuration settings."

    • 🔧 Set the IP address manually (see the Troubleshooting section).
    • 🔄 In the command line (Win + R → cmd) execute:
      ipconfig /release
      

      ipconfig /renew

    Error: "Driver failed to load"

    • 🖥️ Download the driver from official ASUS website, choosing the exact laptop model.
    • 🔄 Disable your antivirus during installation—it may block drivers.

    Error: "No connections available"

    • 🔌 Check if Wi-Fi is enabled on your laptop (key Fn + F2).
    • 🔧 Update your network adapter driver.
    • 🛠️ Make sure the adapter is not disabled in Device Manager.
    ⚠️ Attention: On some models ASUS VivoBook S15 (especially with processors AMD Ryzen) conflicts between Wi-Fi and Bluetooth drivers may occur. If Bluetooth stops working after updating the Wi-Fi driver, roll back to the previous version or install the driver from the official website.
    ⚠️ Attention: If you're connecting to a corporate or educational network (such as a university or office), a security certificate may be required. Contact your network administrator for instructions—standard connection methods won't work.

    FAQ: Frequently Asked Questions

    My VivoBook S15 can't detect 5 GHz networks. What should I do?

    Possible reasons:

    • Your Wi-Fi adapter does not support the 5 GHz band (check the specifications in Device Manager).
    • The 5 GHz mode is disabled in the router (go to the router settings and enable it).
    • The adapter driver is out of date - please update it.

    If the adapter supports 5 GHz, but there is still no network, try manually specifying the channel in the router settings (for example, 36 or 48).

    My Wi-Fi stopped working after a Windows update. How do I fix it?

    Windows updates sometimes reset drivers. Try:

    1. Roll back your Wi-Fi adapter driver Device Manager (right click → Properties → Driver → Roll Back Driver).
    2. Remove the adapter in Device Manager and restart your laptop - Windows will try to install the driver automatically.
    3. Download the latest driver from the ASUS website and install it manually.

    If the problem persists, check if the device is disabled in the BIOS (see section 4).

    My laptop connects to Wi-Fi, but the internet isn't working. What's wrong?

    Reasons and solutions:

    • Problems on the provider's side: Reboot your router or call support.
    • Incorrect IP settings: Set IP and DNS manually (see Troubleshooting section).
    • Blocked by antivirus/firewall: Temporarily disable protection and check the connection.
    • DHCP Issues: In the router settings, enable the DHCP server (usually in the section LAN).

    Also try connecting another device (phone, tablet) to this Wi-Fi network. If the internet doesn't work there either, the problem is with the router or your ISP.

    How do I find out which Wi-Fi adapter is installed on my VivoBook S15?

    There are several ways:

    1. Open Device Manager → Network Adapters — the title will contain Wireless or Wi-Fi.
    2. Use command line:
      wmic nic where "NetConnectionStatus=2" get Name

      This will show active network devices.

    3. Check the model specifications on the ASUS website - the adapter type is indicated there.

    The most common adapters in VivoBook S15: Intel Wi-Fi 6 AX200, Qualcomm Atheros QCA61x4, Realtek RTL8822CE.

    Can VivoBook S15 connect to Wi-Fi without a password?

    Yes, but only if the router is configured to operate without authorization (open network). To do this:

    1. Go to your router settings (usually at 192.168.1.1).
    2. Find the section Wireless Security or Wi-Fi Security.
    3. Select the security type None or Open.
    4. Save the settings and reboot the router.

    ⚠️ Warning: Open networks are vulnerable to hacking. Avoid using this mode regularly, especially if you're transmitting sensitive data.