Integrating a voice assistant into a smart home system opens up enormous possibilities for multimedia control, and the connection Yandex Station Mini with TV Xiaomi Mi TV is one of the most popular configurations on the Russian market. Users often look for a way to directly connect these devices via WiFi to control video playback, volume, and channel switching using just their voice. However, technically, this process doesn't always require a direct speaker-TV connection via HDMI-CEC or IR, as the ecosystem architecture Yandex built on cloud technologies and a local network.
In this guide, we will cover all the nuances of setup, including working through the built-in module Yandex TV in the TV firmware and using the IR remote control, if your model Xiaomi does not have a certificate YandexIt is important to understand that the stability of work smart home Directly depends on the quality of the wireless connection and proper network segmentation. We'll look at why Alice sometimes can't see the TV, how to properly set up scenarios, and what hidden features become available after successfully synchronizing devices within a single perimeter.
Before you begin, you need to ensure that both devices—the smart speaker and the TV—are on the same local WiFi network. This is a fundamental requirement for the device discovery protocol to work. UPnP And mDNS, which gadgets use to find each other. If your router separates the network into guest and main networks, or uses different frequency bands to isolate clients, connecting may be difficult or completely impossible without changing the router settings.
Technical requirements and equipment preparation
To successfully implement a project to create voice control for a TV, you will need certain hardware and software. The key element here is not just the TV itself. Xiaomi, but also the version of its operating system. Most modern models run on Android TV or branded shell PatchWall, which significantly simplifies integration. However, older models with closed systems may require the use of additional IR remote controls from the station. Yandex.
Initial setup requires that you have an account in the system. Yandex, to which the column is linked Alice MiniThis account is used to authorize the TV control skill. If you use public WiFi networks in hotels or offices with web page authentication, you won't be able to connect devices—you need a home network with a permanent IP address or a stable DHCP lease. The router must support WiFi standards no lower than 802.11n, although for the transmission of media content in 4K it is recommended to have 5 GHz range.
⚠️ Note: If your Xiaomi TV has a global firmware version (Global ROM) and your Yandex account is registered in Russia, device search conflicts may occur due to server geolocation. In this case, we recommend checking the region in your Yandex account settings.
It is also worth preparing a mobile device (smartphone or tablet) with the application installed in advance. Yandex or Yandex DomThis is where the basic configuration will be performed. Make sure Bluetooth and location services are enabled on your phone, as the app uses these modules to initially detect the speaker and TV in proximity. Without location services enabled, scanning for available devices on Android smartphones often fails due to OS security restrictions.
Method 1: Native integration via Yandex TV
The most preferred and functional connection method is to use the built-in support for Yandex services in TVs XiaomiMany new models already have a pre-installed module. Yandex TV, which allows you to control your TV with your voice without additional IR adapters. To activate this method, you need to find the appropriate app in the store. Google Play Store on TV or in the apps section PatchWall. If the application Yandex or Yandex TV There is no such thing, you can install it manually via APK file using a file manager.
After installing the application, launch it and log in to your account using the same login as in the application on the smartphone to which it is linked. Alice MiniThe system will automatically prompt you to pair the devices. At this point, authorization tokens are exchanged between the Yandex cloud and your TV. It's important that both devices have the same time and date at this point, as time misalignment can cause security certificate errors and prevent the connection.
In the TV settings, go to the section Settings → Devices & Accessories → Google Cast or a similar option related to casting. Make sure the "Screen Casting" or "Cast" function is enabled. This is the protocol often used to send the command "Alice, play YouTube on my TV." If the TV is detected in the app Yandex Dom, you can rename it to, for example, "Living Room TV" to give precise voice commands.
☑️ Native integration testing
It's worth noting that native integration allows you to not only turn the TV on and off, but also control specific applications such as Kinopoisk, YouTube or IVIThe command "Alice, find comedies on Kinopoisk" will be executed directly on the TV screen if it's selected as the primary playback device. This creates the effect of a true smart home, where the speaker acts as the central control processor and the TV as the actuator.
Method 2: Using the Station Mini IR Remote
If your model Xiaomi If your TV doesn't support direct WiFi integration or you want to control a TV that's not technically smart (but connected to the same network via a set-top box), the built-in IR transmitter in the base comes to the rescue. Yandex Stations MiniThis method emulates a regular remote control. To get started, open the app. Yandex On your smartphone, go to your speaker's settings and select "Infrared Remote" or "TV Control."
Select from the list of manufacturers Xiaomi or MIThe app will prompt you to run a series of tests: the speaker will send signals, and you'll need to confirm whether the TV responds. Typically, you'll need to confirm 3-5 actions, such as changing the volume or turning on the power. After a successful test, the system will save the remote control code. From then on, commands like "Alice, turn up the volume" or "Alice, turn off the TV" will be transmitted via the speaker's IR port.
⚠️ Caution: The infrared signal does not penetrate obstacles. Ensure there is a clear line of sight between the Station Mini base and the IR receiver on your Xiaomi TV. If the speaker is located behind a monitor or in a recess, the controls will not work.
The advantage of the IR method is its versatility—it works even if the WiFi network is temporarily unavailable, since control is transmitted directly from the speaker to the TV. However, this method has its limitations: Alice won't "know" whether the TV is on or off if you turned it on with the original remote. This can be circumvented in scenarios by creating a virtual status, but by default, there is no feedback. You can say "turn it on," and the speaker will send a signal even if the TV is already on.
Setting up scenarios and automation in the Home app
After physically connecting the devices, it's time to set up the logic chains that transform the set of gadgets into a smart system. In the app Yandex Dom Go to the "Scenarios" section and click "Add Scenario." Here you can create a command that will turn on the TV under certain conditions. For example, the "Movie" scenario could simultaneously turn on the TV. Xiaomi, launch the application Kinopoisk and dim the lights in the room if you have smart bulbs.
To create a complex scenario, select the "Voice Phrase" condition and enter text, such as "Start a movie." Add the following actions: "Device → Xiaomi TV → Turn On" and "Device → Xiaomi TV → Launch App." It's important to properly configure the delays between actions if your TV takes a long time to load. Although Yandex's basic scenarios limit delays, you can use intermediate conditions or break the scenario into stages.
Pay special attention to the multimedia settings. Your TV's device card often has default audio settings. Make sure the audio output device is set to "TV" or "HDMI" if you want the audio to go through external speakers. If you're using Yandex Station As an audio source for a TV (via Bluetooth or AUX), the setup is reversed. However, when controlled via WiFi, the audio typically remains on the TV, and the speaker serves only as a microphone.
| Team Alice | System action | Required module | Status |
|---|---|---|---|
| "Alice, turn on the TV." | Power signal (IR) or Wake-on-LAN | IR remote control or Yandex TV | Works |
| "Alice, open YouTube." | Launching the app on Android TV | Yandex TV Skill | Works |
| "Alice, turn the volume up to 20." | Changing the sound level | IR remote control or HDMI-CEC | Works |
| "Alice, show me the photo." | Streaming photos from the cloud | Google Cast / Chromecast | Requires configuration |
Solving common connection problems
Despite the well-established processes, users may encounter situations where Alice stops seeing Xiaomi or responds with a delay. One of the most common causes is a change in the TV's IP address by the router. If your router doesn't have a static DHCP reservation feature, the TV may receive a new address each time it reboots, and the speaker loses its connection to it. We recommend going into the router settings and assigning the IP address to the TV's MAC address.
Another common problem is the TV's WiFi "sleep mode." Some models Xiaomi To save energy, the WiFi module is disabled in standby mode, making it impossible to turn on the TV via Wake-on-WLAN. In this case, the only solution is to use an IR remote control or set the TV to quick start, if such an option is available in the menu. Settings → General → Power SavingDisabling deep sleep may increase power consumption, but will ensure instant response.
⚠️ Note: PatchWall and Android TV firmware interfaces are constantly being updated. The location of menu items may vary depending on the software version. If you don't find the setting described, check