How to connect an iPhone to a Xiaomi TV via Wi-Fi: all the methods and solutions

Wireless connection iPhone to the TV Xiaomi Wi-Fi opens up a wealth of possibilities, from streaming high-definition video to screen mirroring for presentations or gaming. However, many users encounter difficulties—sometimes the TV doesn't detect the smartphone, the connection constantly drops, or the picture lags. The cause is often not device incompatibility, but incorrect network settings or data transfer protocols.

In this article we will look at all current connection methods — from standard AirPlay (if your Xiaomi TV it supports) to universal protocols Miracast And DLNAWe'll pay special attention to setting up your router, as connection stability depends 80% on its parameters. You'll also find a model compatibility chart. Xiaomi TV with different protocols and a checklist for troubleshooting.

If you've tried connecting before and nothing worked, don't blame the technology. In 90% of cases, the problem can be resolved by adjusting a few settings in the TV or router menu. Let's start with the most reliable method.

1. Connect via AirPlay (for compatible Xiaomi TV models)

AirPlay — corporate protocol Apple, which allows you to stream content from iPhone to your TV without delays. However, not all models Xiaomi It is supported. The function is officially available on TVs with MIUI TV 3.0 and laterReleased in 2020 and later (series Mi TV Q1, Mi TV Q2, Redmi Smart TV X and others).

To check support, go to your TV menu: Settings → Connections → Apple AirPlayIf this item is missing, your model is not compatible and you need to use alternative methods (see the following sections).

Step-by-step instructions for AirPlay:

• 📱 On iPhone open Control center (swipe down from the top right corner on models with Face ID or up from the bottom edge on old ones).
• 🔄 Press and hold the music control block (or icon Screen mirroring).
• 📺 Select your device from the list of available devices Xiaomi TV (the name must match the name on the network).
• 🔒 When you connect for the first time, a code will appear on your TV - enter it iPhone for confirmation.

⚠️ Note: If your TV is not displayed in the list of devices AirPlay, make sure both devices are connected to one Wi-Fi network (not to the guest room!) Also check that the TV is in the "Guest mode" Network sharing (Settings → Network → Advanced).

Both devices are on the same Wi-Fi network | AirPlay is enabled in the Xiaomi TV settings | The iPhone has updated software (iOS 14+) | VPN and proxy are disabled on the TV -->

2. Connecting via Miracast (universal method for all models)

Miracast - is a wireless screen sharing standard that works on most modern TVs, including XiaomiUnlike AirPlay, it is not tied to the ecosystem Apple, but requires a more stable Wi-Fi connection. The main advantage is no brand affiliation, so the method is suitable even for older models Mi TV 4 or Mi TV 4A.

To connect you will need:

1. TV Xiaomi with support Miracast (checked in Settings → Connections → Miracast).
2. iPhone with iOS 13+ (may not work on older versions).
3. Screen mirroring application (eg. Screen Mirroring or ApowerMirror).

Instructions:

1. Activate on TV Miracast: Settings → Connections → Miracast → Enable.
2. Install on iPhone mirroring app (see the spoiler below for links to proven options).
3. Launch the app and select yours Xiaomi TV from the list of available devices.
4. Confirm the connection on your TV (you may be asked to enter a PIN).

Recommended apps for Miracast

1. Screen Mirroring (free, but with ads) - supports resolution up to 1080p.

2. ApowerMirror (paid, 290₽/month) — stable broadcast with minimal latency, suitable for gaming.

3. LetsView (shareware) - works without registration, but limits session time to 30 minutes.

If the image is slow or choppy, try:

• 📶 Reconnect to Wi-Fi on the frequency 5 GHz (less busy).
• 🔌 Disconnect other devices from the network (especially those that consume a lot of traffic).
• 📱 Close background apps on iPhone, especially instant messengers and streaming services.

⚠️ Note: On some models Xiaomi TV (For example, Mi TV 4S 2018) Miracast It only works after a firmware update. Check if the software is up to date. Settings → About TV → System Update.

3. Using DLNA to stream media files

DLNA (Digital Living Network Alliance) is a protocol for transferring media content (photos, videos, music) between devices on a local network. Unlike MiracastIt doesn't mirror the screen, but only streams files. This is convenient for watching movies or listening to music without connecting a flash drive.

For work DLNA on Xiaomi TV a media server must be installed (usually pre-installed). iPhone you will need a special application, for example, VLC or Infuse.

How to set up:

1. Turn on the TV DLNA: Settings → Network → DLNA → Enable.
2. Install on iPhone application VLC (free in App Store).
3. IN VLC go to the section Local area network and choose yours Xiaomi TV.
4. Select a file to play - it will start broadcasting to your TV.

The main drawback DLNA — You can't broadcast the entire screen. (for example, for gaming or showing presentations). However, the method is reliable for playing high-quality movies, since it does not depend on performance. iPhone.

AirPlay|Miracast|DLNA|HDMI adapter|Not connected yet-->

4. Configuring the router for a stable connection

If your connection is constantly dropping or the picture is slow, the problem is most likely with your Wi-Fi router settings. To ensure uninterrupted streaming, you need to:

1. Use 5 GHz frequency (less congested, higher speed).
2. Disable energy saving on the router (may break the connection).
3. Reserve IP addresses For iPhone and TV.
4. Enable WMM (Wi-Fi Multimedia) mode to prioritize traffic.

How to change settings (using a router as an example) Xiaomi Mi Router):

1. Go to the router's web interface at 192.168.31.1 (login and password are usually admin).
2. Go to Wi-Fi → Additional settings.
3. Select frequency 5 GHz and set the channel width 80 MHz (for maximum speed).
4. Turn on WMM and turn it off Power saving mode.
5. Save the settings and reboot the router.

⚠️ Note: If you have a dual-band router, make sure that iPhone and the TV are connected to the same frequency (either both to 2.4 GHz or both to 5 GHz). Mixed connections cause broadcast conflicts.

A critical mistake many users make is using a guest Wi-Fi network to connect. Guest mode blocks communication between devices, so AirPlay, Miracast And DLNA will not work.

5. Alternative methods: adapters and cables

If wireless methods are not suitable (for example, due to a weak Wi-Fi signal), you can use wired connection via adapters:

• 🔌 Lightning to HDMI adapter (official from Apple or certified). Suitable for models iPhone without USB-C.
• 🔌 USB-C to HDMI adapter (For iPhone 15 and newer).
• 📶 Wi-Fi Direct adapter (For example, Microsoft Wireless Display Adapter).

Advantages of a wired connection:

• 🎮 Zero lag (perfect for gaming).
• 📺 Maximum image quality (up to 4K@60Hz).
• 🔋 Doesn't drain the battery iPhone (unlike Wi-Fi).

Cons:

• 💰 Additional costs for the adapter (from 1,500₽).
• 🔌 Tied to wires (limited mobility).

To connect via HDMI adapter:

1. Connect the adapter to iPhone.
2. Connect the adapter to the TV via HDMI cable.
3. On your TV, select the appropriate HDMI input.
4. Screen iPhone automatically duplicated on Xiaomi TV.

6. Solving common problems

Even with the correct settings, errors can still occur. Here are the most common ones and how to fix them:

If none of the methods worked, try:

1. Reboot iPhone and TV.
2. Reset network settings on your TV (Settings → Network → Reset).
3. Update your router's firmware (instructions are usually on the device's sticker).

7. Optimizing broadcast quality

To ensure clear picture and synchronized sound, follow these tips:

• 📶 Use 5 GHz - this frequency is less congested and provides greater throughput.
• 🔄 Disable background updates on iPhone (Settings → General → Software Update).
• 🎬 Reduce the video resolution (if you are streaming from YouTube or a streaming service).
• 🔌 Connect your TV via cable to the router (if possible) for stability.

For games via mirroring:

• Use wired connection (HDMI adapter).
• Turn on game mode on TV (Settings → Picture → Game Mode).
• Close all background applications on iPhone.

If you are streaming a movie in 4K, make sure that:

• The router supports Wi-Fi 5 (802.11ac) or newer.
• The TV is in the "Standby" mode. HDMI 2.0 (if you use an adapter).
• The video file has a bit rate no higher than 25 Mbps (otherwise there will be lags).

FAQ: Frequently Asked Questions

My Xiaomi TV doesn't support AirPlay. Is there a workaround?

Yes, you can use it. Miracast through apps like ApowerMirror or LetsView. Also, some users install it on their TV. Android TV alternative firmware with support AirPlay, but it is risky (may void the warranty).

There's no sound when connecting via Miracast. What should I do?

This problem is common to many mirroring applications. Solutions:

1. Connect external speakers or a soundbar to your TV.
2. Use AirPlay (if supported) - it transmits sound without any problems.
3. Try a different app (eg. ApowerMirror usually transmits sound correctly).

Is it possible to connect an iPhone to a Xiaomi TV without Wi-Fi?

Yes, there are two options:

1. HDMI adapter (wired connection).
2. Wi-Fi Direct (if the TV supports it). To do this, turn on the TV Wi-Fi Direct, and on iPhone connect to the network it created as an access point.

Why does the video lag even though the Wi-Fi signal is strong?

The reasons may be as follows:

• The router is overloaded (many devices connected).
• The mirroring app limits the bitrate.
• The TV decodes video using software (not hardware), which eats up resources.

Solutions:

• Reboot your router.
• Reduce the resolution of the video you are streaming.
• Use a wired connection.

How do I check if my Xiaomi TV supports Miracast?

Go to the TV menu: Settings → Connections → MiracastIf there is no item, your model does not support the protocol. An alternative is to use DLNA or HDMI adapter.