Modern kitchen appliances are increasingly becoming equipped with digital functions, becoming part of the ecosystem. Smart Home. Air grills Xiaomi and sub-brands like Deerma or Viomi They allow you to not only fry food with hot air, but also remotely control the temperature, select recipes, and monitor the cooking process from your smartphone. However, initial setup often raises questions among users, especially when connecting the device to a router.
The synchronization process may seem complicated due to the protocol's peculiarities. ZigBee or Bluetooth, which some models use for initial pairing before switching to Wi-FiIn this article, we'll detail the steps involved, address common connection errors, and explain why your router may not recognize a new device. Proper setup will unlock advanced functionality unavailable through manual button control.
Preparing equipment and network before setup
Before proceeding with the software, it is necessary to ensure the physical readiness of all system components. Smart air fryer Xiaomi requires a stable power source and a working network Wi-Fi with a 2.4 GHz frequency. Many modern routers operate in two bands (2.4 and 5 GHz), and this often causes problems during initial setup.
Make sure your smartphone, where you'll install the app, is connected to the same network you plan to connect the grill to. It's also crucial to check that the phone's power is turned on. Bluetooth And GPS (geolocation), since operating systems Android And iOS require these permits to search for new devices in the area.
⚠️ Attention: Xiaomi smart devices typically don't support 5 GHz networks. If your router is broadcasting a single network (Smart Connect), try temporarily separating them in the router settings or creating a guest network that only uses 2.4 GHz.
For successful integration you will need:
- 📱 A smartphone with the app installed Mi Home (or Xiaomi Home).
- 🔌 An air fryer connected to the power grid.
- 📡 Router with support for the 802.11 b/g/n standard.
- 🔋 Charged phone battery (for stable Bluetooth operation).
It's a good idea to know your Wi-Fi network password in advance, as the app will ask for it during setup. If you have complex enterprise-grade security (such as WPA-Enterprise), the connection may fail. In such cases, it's best to use separate guest access with simple encryption. WPA2-PSK.
Installing and configuring the Mi Home app
Control center for all kitchen appliances Xiaomi the application appears Mi HomeIt is available in official stores. App Store And Google PlayHowever, users in the CIS countries often need to change their region in their account settings. Most devices shipped as parallel imports or ordered from China are locked to the "China" region, while European versions work with the "Russia" or "Europe" region.
After installing the application, you need to log in. Create Mi AccountIf you don't already have one, you can sign up using your phone number or email. This is a cloud account that allows you to control your grill remotely, even when you're away from home. Without authorization, the device's functionality will be limited to basic mechanical buttons.
It is important to select the correct region when entering the application:
- 🇨🇳 China: Choose if there are hieroglyphs on the box or the device itself, or if the device is not on any other lists.
- 🇷🇺 Russia/Europe: For official local versions with EAC marking and instructions in Russian.
- 🇺🇸 USA: Rare, but occurs for some specific models.
After selecting a region, the application may prompt you to update. Agree to the update only after the device has been successfully connected for the first time., as new software versions sometimes change search algorithms and may temporarily disrupt the pairing process. Make sure the app has permission to access your local network and location.
Step-by-step process for connecting an air fryer
The process of adding a device to the network takes no more than 2-3 minutes if all preparation conditions are met. Open the application Mi Home and go to the "Devices" tab. In the upper right corner, click the "+" button (Add device). The app will automatically scan for available gadgets. Bluetooth.
If your air fryer is nearby and plugged in, it should appear in the "Local Devices" or "New Devices Found" list. Click the grill icon. If the automatic search doesn't yield any results, select the device manually from the category catalog (e.g., "Kitchen" -> "Air Fryer" or "Multicooker") or by searching by model name.
☑️ Connection checklist
Next, follow the instructions on the screen:
- Choose your home Wi-Fi from the list of available networks.
- Enter your network password (make sure the letter case is correct).
- Click "Next" and wait until the indicator on the device starts flashing, confirming pairing mode.
- The app will transmit network data to the grill. Keep your phone no more than 1-2 meters away during this time.
Once the data transfer is successful, the indicator on the device will stop flashing and turn solid, and the app will show the "Connected" status. You can now rename the device, for example, "Kitchen Grill," and assign it to a room for convenient voice control.
Scripting and Remote Control
After successful connection, you'll gain access to advanced features. In the app, you can not only launch preset modes (potatoes, meat, fish), but also customize your own operating algorithms. For example, you can set the temperature. 180°C and time 20 minutes for the perfect steak by saving this profile as "My Steak".
Remote control allows you to start heating or cooking while you're in another room or even returning from work. However, keep in mind that operation outside of your home network requires a stable internet connection on the router itself. If the internet connection is lost, local control via Bluetooth (if supported by the model) may remain available, but remote control will be disabled.
| Function | Description | Requirements |
|---|---|---|
| Remote start | Start heating from anywhere in the world | Internet, Wi-Fi |
| Monitoring | Real-time temperature and time tracking | Active connection |
| Voice control | Commands via Alice, Siri, or Google Assistant | Configured skill in assistant |
| Software update | Loading new recipes and features | Stable Wi-Fi |
Integration with other smart home devices is also available. You can create a scenario: "When I open the Xiaomi smart lock, the air fryer switches to warming mode." This requires configuration in the "Automation" or "Scenarios" section within the app. Mi Home.
Common errors and how to fix them
Despite the simplicity of the procedure, users often encounter errors at the 99% stage or when searching for a device. The most common issue is connection timeouts. This almost always means that the phone and the grill are unable to hear each other due to the router's frequency ranges.
⚠️ Attention: If the connection keeps dropping during the final step, try disabling mobile data (3G/4G/5G) on your smartphone during setup, leaving only Wi-Fi enabled. Some phones attempt to switch to a mobile network if they detect "no data" on Wi-Fi during pairing.
Other common causes of failures:
- 🚫 Complex password: Using special characters in the Wi-Fi password can sometimes cause parsing errors in older grill firmware versions. Try simplifying the password during setup.
- 📶 Weak signal: If the router is far from the kitchen, the grill may not receive the data packet. Bring your phone closer to the router and the device.
- 🔒 Blocks: Antivirus software on your phone or router security settings (AP Isolation) may block the connection between devices.
Hidden router settings for problematic connections
If all else fails, go to your router settings (usually 192.168.0.1 or 1.1). Find the Wireless Settings section. Make sure the Mode is set to mixed b/g/n, not just n or ac. The Channel Width should be 20 MHz, not 40 MHz. This will improve connection stability for IoT devices.
If the device is frozen and won't enter pairing mode (the indicator light isn't flashing), you need to reset the network settings. This usually involves holding down a specific combination of buttons on the device (for example, the "Time" and "Temperature" buttons simultaneously for 5-7 seconds) until you hear a beep or the Wi-Fi indicator flashes.
Device maintenance and firmware updates
Once your air fryer is connected, it's important to keep its software up-to-date. Manufacturers regularly release updates that improve the accuracy of temperature sensors, add new heating modes, and fix security vulnerabilities. A notification about a new version appears on the device card in the app. Mi Home.
The update process (OTA (Over The Air) is fully automated. All you need to do is click the "Update" button and wait for it to complete. During this process, the device may make sounds, turn on the fan, or change the display—this is a normal part of the controller firmware update process.
It is recommended to check for updates at least once a month. This will ensure that your Xiaomi The air fryer operates with maximum efficiency and safety. Older software versions may contain bugs that affect temperature accuracy, which is critical for recipes.
In conclusion, it's worth noting that proper Wi-Fi setup is the foundation for a stable smart kitchen. Spending 10 minutes on properly configuring the network and app will save you from future problems with a malfunctioning device and give you complete control over your cooking.
Why doesn't the app detect the air fryer even though it's turned on?
Most likely, Bluetooth or location services are disabled on your phone, or the wrong region is selected in the Mi Home app. The device may also already be linked to a different account. In this case, you'll need to remove it from the old account or reset it.
Is it possible to control the grill if the internet is lost?
Basic app control over a local network (if the phone is on the same Wi-Fi network) is often retained. However, remote control and voice commands will not work. The mechanical buttons on the body always function regardless of the network.
How to unlink an air fryer from an old account?
Go to the device settings in the Mi Home app, scroll down, and select "Delete Device." Then, reset the Wi-Fi settings on the grill itself (usually the buttons) so it enters search mode for a new owner.
Does the air fryer support 5G Wi-Fi?
Most Xiaomi models only operate in the 2.4 GHz band. If your router uses a single network with a shared name for both 2.4 and 5 GHz, try temporarily separating them in the router settings or using a 2.4 GHz guest network for setup.