Modern smartphones of the brand Honor have become powerful multimedia centers, capable of not only consuming content but also effectively distributing traffic. A situation where the internet on a tablet or second phone runs out, and all you have at hand is mobile Internet On Honor devices, it's a common occurrence. Fortunately, the Android operating system with MagicOS allows you to instantly transform your device into a fully-fledged wireless router.
This process, often referred to as creation access points, doesn't require installing third-party apps or complex coding. All the necessary tools are already built into the system by default and can be found in the settings menu. The main thing is to understand which parameters are best to set for maximum performance. speed and connection security to avoid wasting traffic.
Before activating tethering mode, you need to make sure your Honor phone is ready to act as a hotspot. First, check the battery level, as active hotspots WiFi significantly increases power consumption. If the charge is below 20%, it's best to plug the device in or avoid using it for long periods of time.
It's also critical to ensure that your SIM card has an activated data plan and free data. Carriers often offer separate plans for personal use and for business use. modem, so it would be a good idea to check the tariff conditions.
⚠️ Please note: Some mobile carrier plans may block or limit speeds when sharing data with other devices. Check your plan's terms in your carrier account to avoid unexpected charges.
To get started, make sure the module is installed Wi-Fi On your Honor phone, it's enabled, even if you're tethering. In modern models, this is a mandatory requirement for the hotspot to function.
Activating a hotspot on Honor smartphones is incredibly simple and takes just a few seconds. There's no need to search for hidden menus or use engineering codes. All controls are centralized in a user-friendly settings interface.
To get started, pull down the notification shade from the top of the screen. Find the icon Access Point (usually looks like two linked rings or a radar). If the icon isn't on the visible panel, click the pencil or edit button to add it. A short press will immediately enable seed mode, while a long press will open the configuration menu.
An alternative way is through system settings. Go to the menu Settings, then select the section Mobile network (or Wireless networks in older versions). There you will need the item Wi-Fi hotspotThis is where all key network security and naming settings are located.
In this menu, you can also see a QR code. Scanning it with another device allows you to instantly connect to your network without manually entering a password. This is convenient if you frequently share your internet connection with the same people.
☑️ Check before starting distribution
The security of your personal hotspot is our number one priority. By default, the system offers encryption protocol. WPA2 PSK, which is the industry standard and provides reliable protection for transmitted data. Changing it to older versions (WEP) or leaving the network open is strictly not recommended.
Your password should be complex enough to prevent neighbors or passersby from accidentally or intentionally connecting to your internet. Use a combination of letters and numbers at least 8 characters long. Avoid simple sequences like "12345678" or "password."
⚠️ Warning: If you leave your hotspot open (without a password), anyone within range will be able to connect to the network and potentially access your local files if network discovery is enabled on your phone.
To change the password, click on the name of your access point in the settings menu. In the window that opens, find the field "Password", enter the new combination, and save the changes. After this, all previously connected devices will be disconnected and will require a new key.
One of the most important, yet often overlooked, settings is frequency band selection. Modern Honor smartphones support two bands: 2.4 GHz And 5 GHzUnderstanding the difference between them will help you optimize signal speed and range.
The 2.4 GHz band provides wider coverage and penetrates walls better, but it's often congested by neighboring routers and household appliances, reducing speed. The 5 GHz band offers higher speeds and less interference, but has a shorter range.
To change the frequency, find the item in the access point menu AP range (or "Access Point Frequency Band"). Select 5.0 GHz for maximum speed if the receiving device is nearby, or 2.4 GHz for better compatibility with older gadgets.
Why can't some devices see the 5 GHz network?
Not all network adapters in older smartphones, tablets, or laptops support the 5 GHz standard. If you've enabled this frequency and your friend can't find the network, switch to 2.4 GHz to ensure compatibility.
The "One-Time Connection" feature simplifies the connection process for devices running the Honor or Huawei ecosystem. It's similar to Wi-Fi Direct technology with simplified authorization.
If both devices are authorized to the same account Honor ID or Huawei IDIf Bluetooth and Wi-Fi are enabled on both devices, then when attempting to share the internet on one device, the other will automatically offer to connect without entering a password. This saves time and eliminates the need to dictate complex characters.
To activate this feature, the switch must be turned on in the access point menu. One-time connectionAlso, make sure that Bluetooth is enabled on the receiving device, as this is how the initial encryption key exchange occurs.
This technology is especially useful in the office or at home when you need to quickly transfer a large file or give access to a colleague without having to worry about lengthy setup.
Sharing the internet is a power-hungry process. The phone's radio module operates in overdrive, constantly transmitting data and maintaining a connection with the base station and client devices. This causes the phone's casing to heat up quickly and the battery to drain.
To minimize battery damage, try not to keep the hotspot on all the time. Use the timer, if it is available in your version of the shell, or simply turn off distribution immediately after use.
If you're planning a long session (for example, working on a laptop for several hours), it's best to connect your Honor phone to a charger. However, keep an eye on the temperature: if the case gets too hot, stop sharing to avoid throttling (reduced performance) or battery damage.
⚠️ Caution: Prolonged use in access point mode in high ambient temperatures (for example, in the sun) may cause the phone's Wi-Fi security system to temporarily disable the module.
Sometimes users encounter a situation where the hotspot is enabled, but other devices can't connect or don't see the network. Most often, the issue lies with security settings or a full client table.
Check if there's a limit on the number of devices that can connect. There's an option in the access point settings Connected devices or Device managementThere you can see a list of everyone currently using your internet and, if necessary, block unknown devices.
You should also try resetting your network settings. Go to Settings → System → Reset → Reset network settingsThis action will not delete your personal files, but it will reset all network settings (Wi-Fi, Bluetooth, mobile data) to factory defaults, which often resolves software conflicts.
The table below shows the main parameters that can be configured to optimize the hotspot performance on Honor:
| Parameter | Recommended value | Impact on work |
|---|---|---|
| Frequency range | 5.0 GHz (for speed) / 2.4 GHz (for compatibility) | Determines the transmission speed and range of the signal |
| Security protocol | WPA2 PSK | Guarantees traffic encryption and protection against hacking |
| Wi-Fi timeout | 10 minutes (or "Never") | Automatically turns off the access point to save power |
| Max connections | 4-6 devices | Limits the load on the processor and communication channel |
| Hiding the SSID | Disabled (for convenience) | Makes the network invisible to search, requires manual entry of the name |
Using a USB modem is a great alternative to wireless sharing if you need to ensure a stable connection for your laptop and charge your phone at the same time. To do this, connect your Honor to your computer using a cable.
In the notification menu, select the USB mode (usually "Charging only") and switch it to USB modemThe computer will automatically detect the new network connection. This method eliminates speed losses due to radio interference and ensures the phone doesn't run out of battery while using it.
However, USB mode doesn't allow internet sharing with other phones or tablets; it only allows internet sharing with the device connected via the cable. This solution is intended for desktop use, not for mobile use.
Finally, it's worth noting that properly setting up a hotspot on your Honor smartphone turns your smartphone into a versatile tool for work and play. Change your password regularly, stay up-to-date with system updates, and monitor your data usage.
Keep in mind that your phone will heat up more than usual in router mode. Let it "rest" after long sessions and avoid using heavy apps on the phone itself while sharing data to avoid overloading the processor.
Following these simple rules will allow you to always stay online, wherever you are, using the full power of your Honor device.
Is it possible to share Wi-Fi if the phone is connected to a Wi-Fi router?
Most modern Honor smartphones running Android 10 or higher have a Wi-Fi Repeater feature. It allows you to receive and distribute Wi-Fi data, creating a new network. However, this feature is not available on all models and depends on the MagicOS version.
Now you know all the intricacies of sharing Wi-Fi from one Honor phone to another. Use this knowledge to effectively manage your digital space.
Why doesn't my Honor phone share the Internet even though the hotspot is enabled?
Most often, the problem is a lack of mobile data (check your balance and signal) or a blocking by your carrier. Also, try restarting your phone.
How many devices can be connected to the Honor hotspot at the same time?
Typically, the system allows you to connect up to 8-10 devices simultaneously, but for stable operation and high speed, it is recommended to limit the number of clients to 3-5.
Does Wi-Fi sharing affect the speed of mobile internet on the phone itself?
Yes, the speed is shared between all connected devices. If one device starts downloading a large file, the speed on the sharing phone and other devices will drop.
How to hide your access point from strangers?
In the access point settings, enable the "Hide SSID" option. This will remove the network from the list of available networks, and you'll need to manually enter the network name to connect.