How to Connect a Samsung TV to a Computer via Wi-Fi: 3 Proven Methods

Wireless TV connection Samsung Connecting a computer to a TV opens up a ton of possibilities: from streaming high-definition movies to using a TV as a second monitor. However, many users encounter problems during setup—devices don't recognize each other, the connection drops, or the image lags. The most common cause is incorrect network settings, outdated software or protocol conflict.

In this article we will look at three main connection methods (mirroring via Miracast, streaming by DLNA and remote access), we will pay attention to typical errors and signal optimization Wi-Fi for stable operation. You'll also learn how to check the compatibility of your model. Samsung TV with one method or another - this will save time on experiments.

Spoiler: If your TV was released before 2018, some functions (for example, Miracast) may be missing. But even for older models, there's a working solution—the main thing is to configure the network correctly.

1. Preparation: Checking compatibility and network

Before you begin setting up, make sure your devices are compatible and are connected to the same network Wi-FiThis is a key requirement for all connection methods. Here's what you need to do:

✅ Check your TV model. Modern Samsung TV (series QLED, Neo QLED, CU8000 and newer) support Miracast And DLNA "out of the box". For models 2016–2017 (For example, MU6100, KU6000) A firmware update may be required. You can find the exact model in the menu: Settings → Support → About TV.

✅ Update your softwareOutdated firmware is a common cause of problems. Update your TV via Settings → Support → Software Update → Update NowCheck the version on your computer. Windows (For Miracast needed Windows 10/11) and wireless adapter drivers.

✅ Set up the networkBoth devices must be connected to one Wi-Fi network (2.4 or 5 GHz). If you're using a dual-band router, avoid "smart" switching between frequencies—lock your connection to a single band. To do this:

1. On TV: Settings → General → Network → Network settings → Select network.
2. On PC: Disable automatic connection to other networks in Network Settings.

TV model supports the selected method|Both devices are on the same Wi-Fi network|TV firmware and PC drivers are updated|VPN and firewalls are disabled (temporarily)-->

⚠️ Attention: If your Samsung TV If your router is connected via cable and your computer is connected via Wi-Fi, the connection won't work. Both devices must use the same connection type (either both via Wi-Fi or both via cable).

2. Method 1: Screen mirroring via Miracast (Wireless Display)

Miracast — a technology for wirelessly transmitting images from a computer to a TV without delaysIt's built in. Windows 10/11 and is supported by the majority Samsung TV starting from 2018The main advantage is the minimal network requirements (a stable signal at the frequency is sufficient) 5 GHz).

How to turn on on TV:

1. Open Settings → General → External devices → Connection device → Screen sharing.
2. Select Wireless (Miracast).
3. Enable the option and wait until the TV starts searching for devices.

How to connect from a computer:

1. Click Win + K (or open "Projection settings" from the notification panel).
2. Choose yours Samsung TV from the list of available devices.
3. Confirm the connection on your TV (you may be asked to enter a PIN).

If your TV does not appear in the list, check:

• 🔄 Reboot your router — sometimes resetting the network helps.
• 🖥️ Update your video card drivers (especially for Intel UHD Graphics).
• 📶 Switch to 5 GHz — Miracast Doesn't work well on 2.4 GHz.

3. Method 2: Streaming via DLNA (Smart View, AllShare)

DLNA — a protocol for transferring media files (video, music, photos) from a computer to a TV. Unlike Miracast, this doesn't duplicate the screen, but plays individual files. Suitable for all models Samsung TV, including older ones (2012–2017), but requires preliminary configuration.

Step 1: Enable DLNA on your TV

1. Open Settings → General → External devices → Connection device → DLNA devices.
2. Activate the option and remember the device name (for example, Samsung-6-Series).

• 🖥️ Windows: Turn on media streaming in Control Panel → Network and Internet → Network and Sharing Center → Advanced Sharing SettingsSelect "Turn on media streaming".
• 🍎 Mac: Install the program Plex or Kodi for media distribution.