Every wireless network user is familiar with the sudden loss of internet service or the connection speed dropping to critically low levels. In such cases, the first and often most effective solution is a simple hardware reboot. The MTS Wi-Fi 4G router, like any electronic device with an operating system, can accumulate software errors over time.
A restart clears the device's RAM of temporary files, terminates frozen processes, and re-registers with the operator's network with updated settings. This action resolves up to 80% of common connection issues without the need for a technician or extensive technical expertise.
In this article, we'll cover all the available methods for restarting your router in detail. You'll learn how to perform the procedure using the button on the router's housing, the admin web interface, and even the mobile app. We'll also cover important tips to help extend the lifespan of your equipment.
Physical reboot: power off method
The easiest and most accessible way to restore your router's functionality is to completely power it off. This method doesn't require any special skills or access to settings. Simply locate the power button on the back of the device or unplug the power cord.
However, for the procedure to be effective, a certain amount of time must be allowed to pass. If you turn on the device immediately, the capacitors inside may not have time to discharge, and the system cache will remain intact. The optimal waiting time is between 10 and 15 seconds.Only after this can the power be turned on again.
After powering on, pay attention to the indicators. The power light should be solid, and the network indicator (usually labeled 4G/LTE or signal) should light up once the router finds a carrier tower. The entire boot process can take up to two minutes.
⚠️ Attention: Avoid using the power cord unplugging method too often as a primary practice. Sudden power surges when turning on a device can negatively impact the power supply over time. It's better to use the power button, if the device has one.
Soft reboot via web interface
A more technically efficient solution is a software restart via the admin panel. This method allows the router system to properly terminate all background processes before shutting down. To access the interface, you must be connected to the router's network via Wi-Fi or cable.
Open any browser on your device and enter the router's IP address in the address bar. By default, this is most often the case for MTS devices. 192.168.0.1 or 192.168.1.1The exact address, login, and password are usually located on a sticker underneath the device. The standard login details often look like this: admin / admin.
After logging in, you'll be taken to the main status page. The interface may vary depending on the model (Huawei, ZTE, Eltex), but the logic remains the same. Find the "System Tools," "Administration," or "Management" tab. There you'll find the "Reboot" button.
Using the web interface is especially useful when the router is technically working, but some functions (such as IP address distribution) are no longer working correctly. Soft restart ensures that the network configuration will be reapplied without the risk of damaging the file system.
☑️ Router settings login process
Factory reset (Hard Reset)
Sometimes a simple reboot doesn't help, and the device continues to function incorrectly due to corrupted settings. In this case, a full factory reset is recommended. It is important to understand: This procedure will delete all your changes: network name, Wi-Fi password, port forwarding settings.
To perform a reset, there is a special button on the MTS 4G router body, often marked as Reset or WPS/ResetIt may be recessed into the housing to prevent accidental pressing. You'll need a thin object, such as a straightened paperclip or toothpick.
With the router turned on, press and hold the reset button for 10-15 seconds. The front panel lights may blink or turn off. After releasing the button, the device will automatically reboot, which will take longer than usual.
| Parameter | Before reset (User Settings) | After reset (Factory Default) |
|---|---|---|
| Network name (SSID) | Your unique name | MTS_XXXX (standard) |
| Wi-Fi password | Invented by you | Indicated on the body sticker |
| Admin password | Changed by you | admin / admin (or from the sticker) |
| APN settings | internet.mts.ru (or auto) | Automatic factory |
⚠️ Attention: Do not interrupt the reset process or the subsequent boot-up of the router. If you turn off the power while updating the firmware or restoring factory settings, the device may become inoperable (bricked) and can only be repaired by a service center.
What to do if the Reset button does not respond?
If holding the button for 20 seconds doesn't work, the mechanism may be stuck or software-locked. Try resetting the device via the web interface and find the "Factory Reset" option. If that doesn't help, you'll need to reflash the device using specialized utilities, which is a complex procedure.
Reboot via the MTS mobile app
Modern MTS routers support management via a proprietary mobile app. This convenient way to monitor network status and reboot the router from anywhere in your home, without having to reach for your laptop or the device.
To use this method, your mobile device must be connected to the router's Wi-Fi network. The app's main screen displays the connection status and a list of connected clients. The reboot function is usually located in the device's settings menu or accessible via the control icon.
The advantage of this method is its clarity. You can immediately see how many devices are connected to the network and what the internet speed was before and after the reboot. The app can also suggest an automatic reboot on a scheduled basis, which is useful for maintaining network stability.
If the app doesn't detect the router or the reboot option is unavailable (gray button), this may indicate a loss of communication between the control module and the router itself. In this case, only physical action on the device will resolve the issue.
Why does the MTS 4G router require frequent reboots?
If your router requires a reboot more than once a week, this is a sign of problems. Overheating is often the main cause. MTS 4G devices are compact and don't always have active cooling. When operating in enclosed spaces or in direct sunlight, the processor overheats, leading to throttling and freezing.
The second factor is radio channel pollutionIn apartment buildings, dozens of neighboring networks operate on the same frequencies. The router has trouble finding open channels, begins to choke on interference, and requires a reboot to rescan the airwaves.
The condition of the SIM card is also worth considering. Old SIM cards that have been used for years may become corroded in the slot or have damaged contacts. This leads to periodic loss of 4G network registration, which the user perceives as the need to reboot the router.
Optimizing performance after reboot
Once you've successfully rebooted your MTS Wi-Fi 4G router, we recommend performing a few steps to consolidate the results. First, check the device's location. It should be upright, away from heating devices and sources of electromagnetic interference (microwaves, baby monitors).
Go to your Wi-Fi settings and make sure you're using the least crowded channel. For the 2.4 GHz band, channels 1, 6, and 11 are considered optimal. If your router supports 5 GHz, switching to it is preferable, as it offers less interference from neighboring equipment.
Don't forget to update your router's software regularly. Manufacturers release patches that fix security issues and improve connection stability with MTS base stations. You can check for updates in the "System" or "Maintenance" sections.
If the internet remains unstable even after all these steps, it's worth checking the signal strength in the web interface. RSRP values below -110 dBm indicate a weak signal, in which case an external antenna or relocation of the router may be necessary, rather than a reboot.
Is it okay to leave a router on 24/7?
Yes, MTS 4G routers are designed for 24/7 operation. However, as a preventative measure, we recommend performing a scheduled reboot every 1-2 months. This helps clear the cache and prevent the accumulation of system errors.
Does frequent rebooting affect the lifespan of a router?
Moderate reboots (once a week or when problems occur) are safe. Excessively frequent power-on and power-off (multiple times a day) puts thermal stress on the board components due to heating and cooling, which could theoretically reduce the lifespan.
What should I do if my settings are lost after a reboot?
This means a factory reset has occurred. You'll need to re-enter your login information (username and password from your contract) in the WAN/Internet settings, as well as set a new name and password for your Wi-Fi network.