Changing your internet provider or router always entails the need to reconfigure all smart devices in the home, and office equipment is no exception. Canon G3411 MFP, a popular model with a continuous ink supply system, requires proper wireless network pairing to print documents and scan from mobile devices. If you simply change the password or network name (SSID), the old connection profile in the printer's memory will become invalid, and the device will stop responding.
Unlike simpler inkjet models, the series PIXMA G It has advanced functionality and its own software, making the setup process both more comprehensive and flexible. You don't need a computer with installed drivers, as basic configuration can be performed using just the buttons on the control panel and your smartphone. The key step is to completely reset the old network settings, without which the printer may endlessly try to connect to a signal that no longer exists.
In this article, we'll detail the steps you need to take to quickly restore your wireless connection. We'll cover automatic setup methods via WPS, manual data entry via the device menu, and using a mobile app. Canon PRINT Inkjet/SELPHY for final synchronization. Correctly following these steps ensures stable operation of the equipment in the new network environment.
Preparatory steps before setting up the network
Before you begin the active reconnection phase, you need to ensure that your home or office network infrastructure is ready to receive the new device. The router must be turned on, in good working order, and broadcasting a signal within the range supported by the device. Canon G3411. 4 GHz.
If your router broadcasts a dual-band signal (2.4 GHz and 5 GHz) under the same name, you may have trouble auto-detection. In this case, temporarily separate the networks in the router settings or ensure that your smartphone, which you'll be using to configure the network, is connected to the correct network. 2.4 GHzThis is a critical point, since the printer will not physically “see” the fifth-generation network.
⚠️ Attention: Make sure your router doesn't have AP Isolation enabled or a MAC address filter blocking new devices. These settings are often enabled by default on corporate networks or guest Wi-Fi networks.
It's also worth checking the status of the MFP itself. There shouldn't be any error or low-ink warning lights on the control panel, which could block access to the settings menu. If the orange warning light is illuminated, first resolve the underlying issue (such as a paper jam or low ink), otherwise wireless module may not activate.
Resetting the printer's old network settings
The most common mistake users make is trying to add a new network profile over the old one. To Canon G3411 If your device starts searching for a new access point, you need to clear its internal memory of previous Wi-Fi configurations. This action will return the network module to standby mode, similar to the state it was in immediately after purchase.
The reset procedure is performed directly from the device's control panel and doesn't require access to a computer. You'll need to locate a button with an antenna or wireless network icon. In some interface versions, this button may be combined with the direct connection function, so pay attention to the symbols on the device's body.
Follow these steps to clear memory:
- 🔌 Make sure the MFP is turned on and the power indicator is on steadily.
- 📡 Click the button
Wireless(or the button with the antenna icon) and hold it until the power indicator flashes once, then release. - 🔄 Press the button immediately
Direct(Direct connection), after which the indicatorsPowerAndWirelessshould start blinking. - ⏳ Wait until the wireless network indicator turns solid blue (or green), which means the reset has been successful and you are in setup mode.
After completing these steps, the printer is ready to search for a new network. If the lights blink in a different pattern or remain orange, repeat the procedure, observing the timing intervals. Sometimes you may need to reset the printer twice if the previous setup session was interrupted.
Using WPS technology for fast synchronization
The fastest way to connect Canon G3411 to the new network - using technology Wi-Fi Protected Setup (WPS). This method allows you to transfer the router password to the printer without having to enter it manually, eliminating typos. However, your router must support this feature and have a physical WPS button or a software equivalent in the web interface.
Activate the search mode on the printer by pressing and holding the button Wireless until the network indicator flashes. Then press the button within 2 minutes. WPS on your router. If there is no physical button on the router, access its settings through a browser (usually at 192.168.0.1 or 192.168.1.1) and find the section Wireless -> WPS, where you need to press the virtual activation button.
The device will begin exchanging encryption keys. At this point, the wireless network indicator on the printer will blink. This process can take anywhere from 30 seconds to 2 minutes. A successful connection is indicated when the indicator stops blinking and remains solid.
What to do if WPS doesn't work the first time?
If the indicators stop flashing and turn orange, the connection is not established. This may be due to signal lag or excessive distance between the devices. Repeat the procedure closer to the router, or try manual setup through the menu.
It's worth noting that some providers disable WPS on their devices by default for security reasons. In this case, you'll need to use manual configuration via the control panel or mobile app, which is discussed below.
Manual adjustment via the Canon G3411 control panel
If the automatic method doesn't work, you'll have to enter the network details manually. This is a more labor-intensive process, but it gives you full control over the connection and allows you to select a specific network from the list of available networks, even if it's hidden. To navigate the menu, use the button Stop (Stop) or a button with a smartphone image, depending on the specific firmware revision of your device.
The algorithm of actions is as follows:
- Click the button
Wirelessto enter the wireless network setup mode. - Use the button
StoporBlack(Black) to cycle through modes until the indicator corresponding to the connection to the access point lights up (usually the antenna icon flashes). - The printer will begin searching for available networks. The list of found SSIDs will be displayed by blinking corresponding indicators or, in some versions, a network report will be printed.
- Select your network by confirming your choice by pressing the appropriate button (often this is the button
ColororBlackdepending on the network's position in the list).
After selecting a network, the device will prompt you to enter a password. Since the Canon G3411 doesn't have a full display and keyboard, input is performed by pressing the color and black-and-white print buttons sequentially, corresponding to character switching. This may seem inconvenient, but the system is designed to minimize the number of steps.
| Action | Button | Indication |
|---|---|---|
| Select a symbol | Black / Color |
Flashing selection indicator |
| Move to the next character | Stop |
Changing the cursor position |
| Confirm input | Wireless |
Network indicator light is steady |
| Cancel / Back | Stop (long) |
Return to the previous menu |
Be careful when entering the password: it's case-sensitive. If you make a mistake, it's better to abort the process and start over rather than wonder why the printer isn't connecting. After successfully entering the password, the device will attempt to connect to the router.
Setup via the Canon PRINT mobile app
The modern and most convenient way to reconnect Canon G3411 - using the official application Canon PRINT Inkjet/SELPHY For Android or iOS smartphones, this method allows you to transfer Wi-Fi settings directly from your phone to the printer using Bluetooth or the MFP's own temporary hotspot.
First, make sure your smartphone is connected to the new Wi-Fi network you want to connect the printer to. Open the app and tap the "Add Printer" button (the "+" icon). The app will begin searching for devices. If the printer is in setup mode (after the reset described in the second section), it will appear in the list of available devices.
The app will prompt you to transfer your wireless network settings. You'll be asked to confirm the action on your smartphone's screen. At this point, the phone will send the SSID and password to the printer. This only takes a few seconds and eliminates the need to manually enter a complex password using the buttons on the device.
⚠️ Attention: For this method to work, the app may require local network and location permissions (especially on Android). Without these permissions, the phone may not "see" the printer during the setup process.
If the automatic search fails, select the "Connect Manually" option in the app and follow the on-screen instructions. The app may ask you to temporarily switch to the printer's own Wi-Fi network (usually identified by the device model, e.g., Canon-G3411 series), complete the setup, and then return to your home network.
☑️ Checklist for a successful connection
Installing drivers and final check
Once the wireless indicator on the printer is solid, you need to make sure the computer can see the device. If you're using Windows, go to Parameters -> Devices -> Printers and scanners and click "Add Printer". The system should find Canon G3411 series in the local network.
For full functionality, including network scanning, we recommend installing the full driver and utility package from the manufacturer's official website. During installation, select the "Wireless LAN" connection type and follow the installation wizard. The program will automatically detect the printer using the new IP address assigned by the router.
It's important to check your device's IP address, as it may have changed when you changed your router. Print a network connection report by clicking the button. Wireless and selecting the appropriate menu item (usually a shortcut to print a report). The document will contain the current IP address, which may be needed for manual driver installation.
Frequently Asked Questions (FAQ)
Why can't my Canon G3411 printer see my Wi-Fi network?
Most likely, your router is operating in 5 GHz-only mode or is using a hidden SSID. Make sure the 2.4 GHz network is active and visible. Also, check if your router has a MAC address filter enabled.
Can this printer be connected to a 5GHz network?
No, the model has a Wi-Fi module. G3411 Only supports the 802.11 b/g/n standard in the 2.4 GHz band. To connect to a dual-band router, make sure the 2.4 GHz guest network is enabled or the network names are separated.
What should I do if the Wi-Fi indicator blinks and does not stop?
This means the printer can't obtain an IP address from the router or the password is incorrect. Reset the network settings again and carefully check that the password is entered correctly, taking into account the case of the letters.
Do I need to reinstall drivers after changing my router?
If the printer's IP address has changed, the old port in Windows may become inactive. The easiest way is to remove the device from the system and re-add it, allowing Windows to automatically find it on the network, or update the port in the printer properties.