It is impossible to imagine a modern office or home workspace without the ability to instantly print documents and photos directly from a smartphone. Model Epson L805 While the printer is deservedly popular for its reliability and ability to print high-quality photos, initial wireless connection setup often raises questions among users. Unlike newer models, it lacks a password entry screen, requiring alternative configuration methods via a computer or mobile app.
In this guide, we'll walk you through every step of connecting your device to a wireless network using official utilities and built-in operating system features. You'll learn how to properly prepare your equipment, avoid common security errors, and set up wireless printing from Android and iOS phones.
To successfully implement your plan, you will need a stable Wi-Fi network, the printer itself, and a device from which you will control it. It is important to understand that Wi-Fi Direct protocol and connecting via a router are two different scenarios, each with its own advantages depending on your current tasks and internet access.
Equipment preparation and compatibility testing
Before you begin software configuration, you need to make sure that you are physically ready Epson L805 Get started. Make sure the printer has ink and the paper tray is loaded with photo paper or regular A4 sheets. The control panel lights should be green, indicating no mechanical errors or low consumables.
It's crucial that your router supports security standards compatible with your printer. Older encryption protocols may not be supported, so it's recommended to use WPA2-PSK (AES)If your router distributes networks on 2.4 GHz and 5 GHz frequencies under the same name, conflicts may occur, since the printer only operates in the 2.4 GHz range.
⚠️ Attention: Printer Epson L805 Doesn't support a 5 GHz network. If your router only broadcasts Wi-Fi at a high frequency, you'll need to go to the router settings and enable the 2.4 GHz network or separate the network names (SSIDs).
It's also worth checking that your smartphone is in a strong signal range. For initial setup, it's best to stand directly next to the printer so you can visually monitor the blinking Wi-Fi indicators. This will allow you to quickly respond to status changes and ensure the device enters configuration mode.
WPS method: quick connection without entering a password
The easiest way to connect Epson L805 The easiest way to connect to a router is to use WPS (Wi-Fi Protected Setup). This method allows you to transfer security settings automatically, without having to manually enter a complex password on your computer. First, make sure your router has a physical WPS button or a corresponding function in the web interface.
Press and hold the Wi-Fi button on the printer's control panel for 3 seconds until the Wi-Fi and network lights (the network symbol) begin flashing alternately. This indicates the device is in connection standby mode. Immediately after this, press the WPS button on your router. Within two minutes, the devices should find each other and establish a connection.
If the connection is successful, the Wi-Fi indicator on the printer will turn green and remain solid. If the indicator lights continue to flash or remain red, this indicates that the WPS function on the router is disabled or not supported by the provider. In this case, you will need to use a more complex, but universal, setup method via a PC.
Setup via PC using Epson Wi-Fi Direct Assist
If automatic connection doesn't work, you'll need to use a Windows or macOS computer connected to the same Wi-Fi network you want to connect the printer to. You'll need to download a utility. Epson Wi-Fi Direct Assist or a full driver package from the official website, since it is impossible to perform the initial configuration of the L805 network module using standard OS tools.
Run the installer and select "Wireless Setup." The program will prompt you to select a connection method. Select "Use a USB cable" or "Automatic wireless setup" if your PC is connected via Wi-Fi. During the installation, the program will ask you to temporarily connect the printer to your computer via USB cable to transfer network profiles.
After the settings have been transferred, you can disconnect the cable. The printer will reboot the network module and attempt to connect to the router. A green Wi-Fi indicator will indicate success. If the process is interrupted, check whether your antivirus or firewall is blocking the installer, and try running the program as administrator.
☑️ Setup Preparation Checklist
Using the Epson iPrint app for mobile devices
For convenient work with smartphones and tablets, Epson has developed a free application Epson iPrint, available on Google Play and the App Store. This is the basic tool that turns your phone into a printer control panel. After installing the app, launch it and tap "No printer selected" at the top of the screen.
The application will automatically search for devices on the local network. If Epson L805 If your printer is successfully connected to the router, you'll see it in the list of available printers. Select your model, and the app will be ready to print. From here, you can print photos from your gallery, documents from cloud storage, or scan files (if a scanner is connected).
An important feature of the app is the ability to check ink status and initiate nozzle cleaning directly from your phone. This allows you to monitor the print head's condition. without having to go to the computerYou can also change the paper size and print quality in the app settings, selecting "Photo" mode for best results.
| Parameter | Meaning for L805 | Recommendation |
|---|---|---|
| Wi-Fi standard | 802.11 b/g/n | 2.4 GHz only |
| AirPrint support | Eat | Printing from iOS without drivers |
| Mobile application | Epson iPrint | Required for Android |
| Wi-Fi Direct | Supported | Printing without a router |
Wi-Fi Direct mode: printing without a router
A unique feature of the model Epson L805 The device supports Wi-Fi Direct mode. This technology allows you to create a direct wireless connection between your phone and printer, bypassing your home router. This is especially useful if you're visiting someone and don't know the Wi-Fi password, or if your home network is overloaded.
To activate this mode, press and hold the Wi-Fi button on the printer until both the Wi-Fi and Direct lights light up. The device will create its own network, the name of which usually begins with "DIRECT-" and includes the printer model. The connection password can be found by printing a Network Status Sheet.
⚠️ Note: In Wi-Fi Direct mode, your phone may lose internet access because it connects directly to the printer. You may need to manually switch between networks to access the network.
To print a status report and find the password, turn off the printer. Then, press and hold the Network button (the network icon) while turning on the power. Hold the button for about 5-7 seconds until the printer starts printing. The SSID and Password will be listed in the Wi-Fi Direct section on the printed report.
How to reset network settings?
If your printer no longer sees your network or your router password has changed, you need to reset your network settings. Turn off the printer. Press and hold the "Network" and "Wi-Fi" buttons simultaneously, then turn it on. Hold the buttons for about 5 seconds. The network and Wi-Fi indicators should flash. After this, you'll need to repeat the setup process.
Printing from iPhone (AirPrint) and Android
Apple device owners can appreciate the technology AirPrint, which is built into iOS. You don't need to install any additional apps to print photos or documents from your iPhone or iPad, as long as the printer and phone are on the same network. Simply open the photo, tap the "Share" button, and select "Print." You should see Epson L805.
Android users are recommended to use the app Epson iPrint Or the system print service. In modern versions of Android (starting with 4.4), printing support is built into the system. Go to your phone's settings, find "Connections" -> "Other settings" -> "Printing," and make sure the Epson plugin is enabled.
When sending a document to print through the standard Android menu, the system will automatically detect the printer on the network. If the device is not found, check if Client Isolation (AP Isolation) is enabled on your router, which prevents devices within the network from seeing each other. This feature is often enabled on guest networks in hotels or cafes.
Troubleshooting and fixing connection errors
During setup, users often encounter a situation where the Wi-Fi indicator blinks but remains dim or turns orange. This means the printer is trying to connect but is unable to obtain an IP address from the router. Check your router's DHCP settings—it may have run out of addresses or be using MAC address filtering.
Another common issue is the router or printer's sleep mode. If the devices haven't been used for a long time, they may lose sync. Try rebooting the router and then the printer. Also, make sure the device's network name (SSID) isn't too complex or contains special characters that the printer might interpret incorrectly.
If all else fails, perform a full reset of the printer's network settings as described in the spoiler above, and try setting it up again, moving as close to the router as possible. Sometimes distance or thick walls can weaken the signal during the initial handshake between devices.
Why can't my phone detect my Epson L805 printer?
Most often, the problem is that the phone and printer are connected to different networks (for example, one on 5 GHz and one on 2.4 GHz, or one for guest use and one for home use). Make sure both devices are on the same subnet. Also, check if your phone's antivirus software is blocking detection of local devices.
Can the Epson L805 be connected to 5GHz Wi-Fi?
No, the L805 model is equipped with a module that only operates in the 2.4 GHz band. Connecting to a 5 GHz network is technically impossible. If your router combines both bands under one name, try temporarily separating them in the router settings or use WPS mode to automatically select the correct frequency.
What to do if the orange Wi-Fi light is on?
An orange light usually indicates a connection error or low signal strength. Try moving the printer closer to the router. If that doesn't help, check the password you entered (it's case-sensitive) and the encryption type. As a last resort, reset the printer's network settings.