Modern technologies allow us to completely abandon bulky wires, turning our home or office printer into a convenient network device, accessible from any gadget within range. Model Canon PIXMA G3415 It is one of the most popular inkjet MFPs due to its cost-effectiveness and functionality, allowing you to transfer documents and photos directly from your smartphone.
The process of organizing wireless communication Establishing a connection between a mobile device and a printer may seem complicated at first glance, but manufacturers have simplified this protocol as much as possible. You don't need in-depth knowledge of networking technologies; simply follow the steps outlined in this guide.
In this article, we'll take a detailed look at all possible connection methods, including standard methods via a router and direct connection, and also consider the nuances of working with operating systems. Android And iOSProper setup will ensure stable operation of the device and eliminate the need to search for a USB cable every time.
Equipment preparation and requirements verification
Before you begin software configuration, you need to make sure your hardware is physically ready for wireless operation. To successfully implement your plans, you'll need the hardware itself. Canon printer, a working router with an active Wi-Fi channel and a smartphone with an installed Internet connection.
Make sure an A4 sheet of paper is loaded in the paper feeder and ink cartridges are installed in the output tray. If the control panel lights are flashing orange, this may indicate an error that needs to be resolved before configuring the network.
- 📱 Smartphone or tablet with Android 5.0+ or iOS 10.0+ operating system
- 📡 A working router with Wi-Fi enabled and a known password
- 🖨️ Canon G3415 printer, plugged into a power outlet and within network coverage area
- 🔌 Access to control buttons on the front panel of the MFP
⚠️ Important: Make sure your router does not use the Client Isolation feature, as it prevents devices on the same network from communicating with each other, making printing impossible.
An important point is the frequency of the wireless network that it supports. Canon G3415This device operates exclusively in the 2.4 GHz band, so if your router broadcasts both 5 GHz and 2.4 GHz networks under the same name, it may have trouble detecting it.
In this case, it is recommended to temporarily separate the networks in the router settings or use a 2.4 GHz guest network to perform the initial configuration. Signal stability also plays a key role, so bring your phone closer to the printer during setup.
Setting up the Canon G3415 printer for network use
The first step is to put the printer itself into connection standby mode. On the panel Canon PIXMA G3415 You need to find the button marked with a smartphone or antenna icon. Pressing this button activates a search for available networks or direct connection mode.
If the wireless indicator starts blinking blue, it means the Wi-Fi module is active and ready to pair. In some cases, you may need to hold the button for a few seconds until the blinking pattern changes.
For more precise configuration via the printer's menu (if the model supports a screen or an extended indicator menu), you can use key combinations. However, for the G3415 series, the WPS method or app-based configuration are most commonly used.
Let's look at the WPS method, which is the simplest if your router supports it. Press the WPS button on the router, then press the wireless button on the printer within two minutes.
WPS steps:1. Press the WPS button on the router.
2. Press and hold the Wi-Fi button on the printer until the indicator light flashes.
3. Please wait 2 minutes for pairing to complete.
After a successful connection, the Wi-Fi indicator on the front panel MFP The LED will stop flashing and remain solid blue. This indicates that the device has received an IP address from the router and is ready to use.
Using the Canon PRINT Inkjet/SELPHY app
The most functional way to manage printing is to use the official software from the manufacturer. Application Canon PRINT Inkjet/SELPHY available in stores Google Play And App Store and provides full control over the device.
After installation and launch, the program will automatically prompt you to add a new printer. Select your model from the list. G3415 and follow the on-screen instructions. The app will automatically attempt to find the device on the local network.
☑️ Connection check
During setup, the app may request permission to access your local network and geolocation. This is necessary to accurately scan for available devices in the wireless environment around you.
If the automatic search doesn't yield results, select manual addition and enter your wireless network name (SSID) and password. Data will be transferred to the printer via audio signals or a temporary direct connection.
| Application function | Description of features | The need for Wi-Fi |
|---|---|---|
| Printing documents | Print PDF, Word, and Excel files | Required |
| Photo printing | Editing and printing photos | Required |
| Scanning | Saving copies to the cloud or memory | Required |
| Monitoring | Checking ink levels and status | Required |
With this software you can not only print but also perform scanning documents directly to your phone's memory. This makes document management completely mobile and computer-independent.
Printing from Android devices without third-party apps
Owners of smartphones based on Android You can often get by without installing additional software if your operating system is up-to-date (starting with Android 4.4). The system already has a built-in printing service; you just need to activate it.
Go to your phone's settings, find the "Connections" or "Connected Devices" section, and select "Print." You'll need to enable the plugin here. Canon Print Service, which can be pre-installed or downloaded upon system request.
Once the service is enabled, the phone will begin searching for available printers on the network. When it appears in the list Canon G3415, you can open any document or photo, click the "Share" or "Print" menu and select a device.
What to do if the phone doesn’t see the printer?
Make sure your phone and printer are connected to the same Wi-Fi network (same SSID). Sometimes, rebooting the router or temporarily disabling mobile data (3G/4G) on your phone while searching helps.
For more advanced customization, you can use a plugin. Mopria Print Service, which is a universal standard for mobile printing. It automatically detects compatible devices and allows you to customize paper and quality settings.
It's important to note that when printing through the standard Android interface, you only get a basic set of settings. Accessing specific features, such as printing on discs or customizing label layouts, will still require the proprietary app.
Printing from iPhone and iPad via AirPrint
For ecosystem users Apple is the luckiest of all because the technology AirPrint Built directly into the iOS operating system, you don't need to install anything, configure drivers, or register for services to print.
Simply make sure your iPhone or iPad is connected to the same Wi-Fi network as the printer. Open a document, photo, or webpage, tap the "Share" icon (a square with an upward-facing arrow), and select "Print."
In the menu that appears, click "Select Printer" and the system will automatically find Canon G3415 Online. You can immediately specify the number of copies, page range, and choose black-and-white or color printing.
⚠️ Please note: AirPrint does not support scanning. To receive digital copies of documents on your iPhone, you will need to install the Canon PRINT Inkjet/SELPHY app.
The advantage of this method is its high stability and data transfer speed. The AirPrint protocol is optimized for graphics and text, ensuring minimal delays between sending a job and the start of printing.
If you plan to print frequently, you can add the printer widget to your notification center for quick access. This will save you time and eliminate the need to go through the settings menu each time.
Direct Connection Mode
Situations vary, and a properly configured router or internet connection isn't always readily available. In such cases, Canon G3415 Allows you to create a direct connection between your phone and printer, creating your own wireless access point.
To activate this mode, press and hold the wireless button on the printer's control panel until the power light turns green and the Wi-Fi light starts blinking. Then press the color or black and white copy button.
Now in the list of Wi-Fi networks on your phone a new connection will appear with a name like this Canon_ij_XXXX. Connect to it using the password, which can be found in the instructions or on a sticker under the device (the default is often canonij or similar).
This method is ideal for printing vacation photos or documents on the road, where there's no access to office or home infrastructure. Transfer speeds in Direct mode may be lower than through a router, but are sufficient for most tasks.
Once you've finished printing, remember to turn off the direct connection on your printer by pressing the corresponding button to release the Wi-Fi module and return the device to its standard standby mode.
Troubleshooting and diagnostics
Even with proper setup, errors may occur due to software conflicts or changes to network settings. If your printer disappears from the list of available devices, first check to see if the Wi-Fi password or router IP address has changed.
A common problem is the printer's network module falling asleep. If the Wi-Fi indicator is dim or off, try turning the device off and on again. Resetting the network settings on the MFP itself also helps.
- 🔄 Restart your router and printer by unplugging them for 10 seconds.
- 📶 Check if your router has a MAC address filter that is blocking new devices
- 📲 Remove the old printer from the list of saved devices on your phone and add it again
- 🔋 Make sure your printer isn't out of ink, which can block network functions.
In some cases, your phone's antivirus software or firewall settings may block the ports needed for printing data. Try temporarily disabling the protection to test this.
⚠️ Please note: Mobile app and operating system interfaces are updated regularly. Button locations and menu item names may differ from those described depending on your software version.
If all else fails, perform a full network reset on the printer. This is usually done by holding the wireless button until the lights flash in a specific pattern, as specified in the instructions.
Frequently Asked Questions (FAQ)
Is it possible to print on a Canon G3415 without a router?
Yes, this is possible. Use Direct Connection mode, described in the article above. In this case, the phone connects directly to the printer, creating a local network without the need for an external router.
Why does the phone see the printer, but printing does not start?
Most often, this is a file format compatibility issue or a full print queue. Try restarting both devices, clearing the print queue in the application, and ensure the document isn't copy-protected.
Does the G3415 support printing from memory cards or flash drives?
No, the Canon PIXMA G3415 does not have a memory card slot or a USB port for connecting external drives (only for a cable to a PC). Printing is only possible via Wi-Fi from a computer or mobile device.
How to improve the quality of photo prints from your phone?
In the Canon PRINT app, select "Photo Paper" as the paper type and set the quality to "High" before printing. Also, make sure the original image has sufficient resolution, otherwise compression artifacts will be visible in the print.