How to Completely Disable Wi-Fi on a Sony TV: 5 Proven Methods

Disabling Wi-Fi on your TV Sony It can be useful in a variety of situations, from saving energy to solving problems connecting to other networks. Some users prefer to use a wired connection (Ethernet) for stability, others want to limit children's access to the Internet through Smart TVWhile others encounter bugs where the TV spontaneously connects to saved networks, this article will cover all possible ways to deactivate a wireless network—from standard settings to hidden functions in the engineering menu.

It is important to understand that the process differs depending on operating system your TV: Android TV, Google TV or proprietary firmware on older models. We'll also take into account the interface features of different years of production—from Sony Bravia 2015–2018 to modern lines X90J, A80K And X95LIf you are unsure of the model, you can check it in the menu. Settings → About TV or on a sticker on the back of the case.

Before you begin, please check if you are using any internet-dependent features: YouTube, Netflix, Google Assistant voices or automatic software updateDisabling Wi-Fi will make them unavailable. If the goal is simply to change networks, it's enough forget the current access point without completely deactivating the module.

1. Standard method: via the network settings menu

This is the most obvious and safe method that works on 90% of models. Sony Bravia With Android TV or Google TVThe interface may differ slightly, but the logic remains the same. Follow the step-by-step instructions:

1. Open the main menu on the remote control by pressing the button Home (house).
2. Go to the section Settings (gear in the upper right corner).
3. Select Network and Internet (or simply Net on older models).
4. Open the tab Wi-Fi.
5. Move the slider Wi-Fi in position Off (or click Disable).

On some TVs Sony 2019–2022 years (for example, X950G or AG9) instead of a slider there can be a button Network managementIn this case:

• 🔹 Click Network management → select your network from the list.
• 🔹 Click Forget (this will delete the saved password).
• 🔹 Go back and move the Wi-Fi slider to the on position Off.

Make sure your TV isn't downloading updates.

Close all applications using the internet

Connect an Ethernet cable if you plan to use a wired network.

Write down your Wi-Fi password in case you plan to connect later-->

If the TV still connects to the network after disconnecting, check the settings automatic connectionTo do this:

6. On the menu Wi-Fi select Additional settings (or Extended).
7. Disable the option Automatic connection to networks.
8. Make sure the function Wi-Fi Direct also disabled (it can automatically search for devices to connect to).

2. Disabling Wi-Fi using Airplane Mode

Function Airplane mode (or Airplane mode) completely disables all wireless modules of the TV, including Wi-Fi, Bluetooth And Wi-Fi DirectThis is convenient if you need to temporarily interrupt any network connections. This method works on all models with Android TV 8.0 and newer.

How to activate:

1. Press and hold the button Home on the remote control and hold for 3-5 seconds until the side menu appears.
2. Select Settings → Network and Internet.
3. Scroll down and turn on the slider Airplane mode.

On TVs Sony 2020–2023 years (for example, X900H or A9S) the path may be different:

• 🔹 Settings → System → Airplane mode.
• 🔹 Or via the quick access panel (swipe down from the top edge of the screen).

Daily

Several times a week

A row, only for firmware

I never connect to the internet-->

Important: In Airplane mode, the Bluetooth remote control is also disabled (for example, Sony RMT-TX300U), if it doesn't support IR connection. Make sure you have a spare remote with an IR port.

⚠️ Attention: on some models Sony Bravia 2017–2018 years (for example, XE90 or AF8Airplane mode may reset after rebooting the TV. To avoid this, disable Wi-Fi using the standard method (Section 1).

3. Reset network settings to factory defaults

If the TV stubbornly connects to Wi-Fi despite all manipulations, it will help complete reset of network settingsThis will delete all saved networks, passwords, and proxy settings. This method is suitable for models with Android TV 7.0+ And Google TV.

Instructions:

1. Go to Settings → Storage and reset (or Device → Reset).
2. Select Reset network settings (not to be confused with a full reset of the TV!).
3. Confirm the action by entering the PIN code (by default 0000 or 1234).
4. After rebooting, Wi-Fi will be disabled and you will have to manually set up the network again if necessary.

On TVs Sony 2015–2016 years (for example, XD85 or S85C) the path may look like this:

• 🔹 Settings → Net → Additional settings → Network reset.
• 🔹 Or Settings → Support → Recovery and reset.

⚠️ Please note: After a network reset, the TV may turn on automatically. mobile Internet, if a USB modem is connected to it. Disconnect the modem or disable the option. Mobile data on the menu Network and Internet.

4. Disabling Wi-Fi via the engineering menu (for advanced users)

If standard methods don't work, you can use service menu TV. This method is suitable for all Sony models, but requires caution—incorrect actions may impair the device's operation. We recommend it only in extreme cases.

Instructions for Android TV:

1. Turn off the TV using the remote control.
2. Press in sequence (with an interval of 1 second): Menu → 5 → Volume+ → Power (power button).
3. The TV will turn on in service mode. Go to the section Network Settings.
4. Find the parameter Wi-Fi Module and set the value Disable.
5. Save the settings and restart the TV.

For models on Linux firmware (For example, Sony Bravia 2014–2016):

1. With the TV turned off, press and hold i+ (Info) on the remote control and the button Power on TV.
2. Hold for 10 seconds until the service menu appears.
3. Go to Option → Network → Wi-Fi Control and turn off the module.

What happens if I disable the Wi-Fi module in the engineering menu?

If you disable Wi-Fi at the firmware level, the TV will stop detecting any wireless networks until the next reset or manual activation of the module. This method is useful if the TV spontaneously connects to networks despite all settings. However, after a firmware update, the settings may reset!

Warning: Changing the parameters in the engineering menu may lead to loss of warranty or unstable work TV. If you are unsure of what you are doing, contact a service center. Sony.

5. Physically disabling Wi-Fi (for the tech-savvy)

In rare cases, for example, when hardware failures of the Wi-Fi module or if the TV is used in conditions of strict isolation from the networks, you can resort to physical disconnection of the antennaThis method is irreversible and requires disassembling the case, so it is only suitable for experienced users.

How to do it:

1. Unplug the TV and wait until it cools down completely (10–15 minutes).
2. Remove the back cover by unscrewing the screws (usually T8 or T10).
3. Locate the Wi-Fi module - it looks like a small board with antenna wires (usually marked as WLAN or BCM43xx).
4. Carefully disconnect the antenna cables or remove the module completely (if it is removable).

What to look out for:

• 🔹 On models Sony X900F, X950G On newer models, the Wi-Fi module is often integrated into the main board. In this case, physically disconnecting it is impossible without soldering.
• 🔹 After disconnecting the antenna, the TV may display an error No Wi-Fi module detected when loading, but this is not critical for operation.
• 🔹 If you're unsure of the module's model, take a photo of it before disconnecting it—this will help with reassembly.

⚠️ Warning: TV disassembly Sony This will void the warranty. If your device is under warranty, contact an authorized service center to have the Wi-Fi module diagnosed. The cost of replacing the module at a service center is typically 3,000–5,000 rubles (as of 2026).

6. Alternative methods: blocking at the router level

If you need block the TV from accessing the Internet, but leave Wi-Fi on (for example, to use Miracast or DLNA), you can set up blocking on the router side. This method doesn't require any changes to your TV settings and is suitable for all models.

How to block a TV in a router:

1. Connect to the router's web interface (usually at 192.168.1.1 or 192.168.0.1).
2. Find the section DHCP clients or Connected devices and write it down MAC address your TV (for example, 00:1A:79:XX:XX:XX).
3. Go to Access control (or Parental Control) and add a blocking rule for this MAC address.
4. Save the settings and reboot the router.

On routers TP-Link the path may look like this:

• 🔹 Advanced Settings → Network Tools → Bandwidth Control.
• 🔹 Or Basic Settings → Wireless Mode → MAC Filtering.

The advantages of this method:

• 🔹 The TV will not be able to connect to the Internet, but Wi-Fi will remain active for local functions.
• 🔹 There is no risk of damaging your TV settings.
• 🔹 You can flexibly manage access (for example, allow internet access only during certain hours).

7. How to "forget" a network instead of completely disabling Wi-Fi

If your goal is simple change network or delete saved passwordYou don't have to turn off Wi-Fi completely. Simply "forget" the current access point. This is useful if the TV automatically connects to a weak signal or you want to switch to a different network.

Step-by-step instructions:

1. Open Settings → Network and Internet → Wi-Fi.
2. Select the current network from the list Saved networks.
3. Click Forget (or Delete).
4. Confirm the action. The TV will disconnect from the network, but the Wi-Fi module will remain active.

On TVs Sony Google TV (2022-2026) the interface is slightly different:

• 🔹 Go to Settings → Network and Internet → Internet.
• 🔹 Click the gear next to the network name → Forget the network.

If you want disable automatic connection to open networks (for example, in cafes or hotels), disable the option:

• 🔹 Settings → Network & Internet → Wi-Fi → Additional settings → Auto-connect to open networks.

Common problems and their solutions

Even after turning off Wi-Fi, users Sony Bravia Sometimes we encounter unexpected difficulties. Let's look at typical scenarios and how to resolve them.

If after disconnecting Wi-Fi the TV starts brake or give errors, try:

1. Restart the TV (button) Power for 10 seconds).
2. Reset to factory settings (Settings → Storage & reset → Factory data reset).
3. Update firmware manually via USB (instructions on the website) Sony).

⚠️ Warning: on TVs Sony With Android TV 9.0 and newer, after a data reset, you may need to reactivate licenses for applications (e.g. Netflix or Disney+). Make sure you have the login information for your accounts.

FAQ: Answers to frequently asked questions

Is it possible to turn off Wi-Fi on a Sony TV without a remote?

Yes, there are several ways:

• 🔹 Use remote control from another device with an IR transmitter (for example, from an air conditioner), programming it under Sony Bravia.
• 🔹 Connect keyboard or mouse via USB and manage the menu through them.
• 🔹 On models with Google TV can be used application Android TV Remote on a smartphone (requires prior connection to the same network).

If the TV supports Voice control (microphone button on the remote), try the commands: “Ok Google, turn off Wi-Fi” or Turn off the network.

Why does my Sony TV turn on Wi-Fi by itself after an update?

This is a known issue on TVs with Android TV 10/11After updating the firmware, the system may reset some network settings. To avoid this:

1. Before updating, please turn off Wi-Fi and perform network reset (section 3).
2. After the update, immediately go to settings and manually turn off Wi-Fi.
3. Turn it off Automatic software update V Settings → Device → Software Update.

If the problem persists, please contact support. Sony indicating the TV model and firmware version.

How do I turn off Wi-Fi on a Sony TV if it's password-locked?

If the TV asks PIN code or password To access settings, try:

• 🔹 Standard combinations: 0000, 1234, 1111 or 9999.
• 🔹 If the password has been changed, but you have forgotten it, follow these steps full reset TV (Settings → Storage & reset → Factory data reset). This will delete all settings, including the password.
• 🔹 On models with Android TV 8.0+ You can reset your password through Google account, if the TV is linked to it.

If the TV is locked after being purchased second-hand, please contact the previous owner or provide proof of purchase to the service center. Sony to unlock.

Will my Sony TV work without Wi-Fi?

Yes, the TV retains all basic functionality without internet connection:

• 🔹 Everyone is working analog and digital channels (DVB-T2, cable TV).
• 🔹 Available HDMI ports for connecting set-top boxes, game consoles, laptops.
• 🔹 They are functioning USB ports to play media files.
• 🔹 They are working headphone inputs And soundbars.

What will not work:

• 🔹 Streaming services (Netflix, YouTube, OKKO).
• 🔹 Voice assistants (Google Assistant, Alice).
• 🔹 Firmware update and applications.
• 🔹 Smart TV functions, requiring the Internet (for example, Screen Mirroring without local network).

How do I know if Wi-Fi is turned off on my Sony TV?

There are several ways to check your connection status:

• 🔹 On the screen: the icon in the upper right corner should disappear Wi-Fi (waves or antenna).
• 🔹 On the menu: Settings → Network & Internet → Wi-Fi — the status must be Disabled.
• 🔹 Via a router: The TV's MAC address should not be in the list of connected devices.
• 🔹 Try opening YouTube or another online application - a message about the lack of internet connection should appear.

If the Wi-Fi icon remains on the screen, but the Internet is not working, the TV may be connected to a network without Internet access (for example, a guest network with restrictions).