Modern subscribers often face the need to temporarily or completely disable their wireless signal. There can be many reasons: you're going on vacation and want to secure your network, you plan to use your device exclusively as a wired modem, or the wireless module is interfering with other equipment. In any case, equipment owners Rostelecom must know where to look for the required settings.
The process of deactivating the radio module depends on the specific terminal model installed by the provider. These may be devices from Sagemcom, Sercomm, Eltex or newer models with support Wi-Fi 6Despite the differences in the interface's appearance, the logic of actions remains similar, requiring access to the admin panel.
In this article, we'll take a detailed look at all the available wireless module management methods. You'll learn how to find hidden settings, what to do if the standard interface doesn't allow you to turn off the radio, and how to physically restrict network access without changing software settings.
⚠️ Please note: Personal account interfaces and router firmware are constantly being updated. The layout of menu items may differ from that described in the instructions. If you don't find an exact match, look for sections with similar names related to wireless communications.
Accessing the router's web interface
The first step to making any hardware configuration changes is to log into the control panel. To do this, you need to connect your computer or smartphone to the router. A cable is best. LANto prevent the connection from being interrupted when the wireless network is turned off.
Open any browser and enter the device's IP address in the address bar. The standard address for most models is Rostelecom is 192.168.1.1 or 192.168.0.1If the address has been changed previously, you can find the current one on the sticker on the bottom of the case.
The system will request authorization. By default, the login and password indicated on the same sticker are used. Often, this is a combination admin / admin or unique data linked to a specific piece of equipment. After successfully entering the data, the main settings page will open.
☑️ Check before entry
Disabling Wi-Fi via the Sagemcom panel
Routers of the brand Sagemcom (for example, the F@st 2804 and 3804 models) are among the most common in ISP networks. Their interface has a classic structure with tabs at the top of the screen. To manage your wireless network, go to the section Network (Network) and select a subsection WLAN or Wireless.
In the menu that opens, look for the option Wireless or Enable Wireless. Uncheck this item or switch the slider to the position Off Completely deactivates the antennas. Note that there may be separate settings for the 2.4 GHz and 5 GHz bands if your router is dual-band.
After changing the parameter, be sure to click the button Apply or Save at the bottom of the page. Without saving any changes, the router will simply reload the settings page, leaving the module enabled. The signal will disappear 10-15 seconds after the configuration is applied.
Wireless network settings on Sercomm and Eltex
Equipment from Sercomm (models RV6699, FG1500) and Eltex (NTU-2, NTP-RG-1400) has a more modern, but sometimes confusing, interface. Here, controls are often located in a separate tab. Wi-Fi or Wireless network on the sidebar.
Inside the section you need to find the switch Turn on Wi-Fi (Enable Wi-Fi). In some firmware versions Rostelecom This item may be hidden in a submenu. Basic settings (Basic Settings). If you see a list of connected clients, you're in the right section, but look for the configuration button.
Interfaces Eltex often require switching to advanced settings mode. Look for the button Advanced or a display mode switch. Only in advanced mode are full radio module settings available, including disabling it completely.
In this case, you first need to change the operating mode of the device.
| Router model | Path to setup | Option name | Preservation |
|---|---|---|---|
| Sagemcom F@st 2804 | Network -> WLAN | Wireless | Apply |
| Sercomm RV6699 | Wi-Fi -> Basic | Turn on Wi-Fi | Apply |
| Eltex NTU-2 | Wi-Fi -> Settings | Turn on the radio | Save |
| Upvel UR-341AN4 | Wi-Fi -> Basic | Turn on wireless network | OK |
Physical disconnect and Wi-Fi button
Not all users want or can access complex web interface settings. Fortunately, many modern router models Rostelecom Equipped with a physical button for quick control of the wireless module. It can be located on the top panel or on the back panel next to the ports.
Typically, such a button is marked with an antenna icon or an inscription WLAN / Wi-FiA short press (about 1-2 seconds) often changes the indicator status: if the wireless network light goes out or lights up in a different color, then the module is turned off.
However, there is a nuance. On some devices, this button is only responsible for the function by default. WPS (quick connection). To reassign its function, you sometimes need to hold the button longer (5-10 seconds) or first enable the "Wi-Fi button" option in the software settings.
What to do if there is no button?
If there's no button on the housing and no disable option in the menu, you can try adjusting the signal strength programmatically to a minimum. This won't turn off the module completely, but it will reduce the range to a few centimeters, effectively disabling it.
Using the My RTK mobile app
The provider actively promotes the use of the mobile application My RTK (or Rostelecom Internet) for service management. This is a convenient way to monitor your network from your smartphone, without being tied to a computer. The app allows you to manage your tariff plan, but also provides access to basic equipment settings.
After logging into the app (using your phone number or contract login), select your device from the list of connected devices. The router's control menu often features a tile or switch. Wi-FiClicking on it allows you to instantly stop the signal transmission.
The advantage of this method is that the app works through the provider's cloud. You can turn off the network even when you're far from home, as long as the router itself has an active internet connection. This is an ideal option for parents who want to restrict their children's internet access remotely.
Problems when disconnecting wireless network
Sometimes users encounter a situation where the disable option is inactive (grayed out) or changes are not saved. This may be due to the provider blocking this feature at the remote configuration level (TR-069). In this case, the router constantly receives the command "turn on Wi-Fi" from the operator's server.
Another common problem is losing access to settings. If you disable Wi-Fi while connected to a wireless network, the connection to the router will be lost. You won't be able to turn the network back on without reconnecting the cable. Therefore, it's best to make any critical changes while sitting in front of the router with the cable in hand.
It's also worth considering that completely disabling the radio module may affect the operation of IPTV set-top boxes if they are connected via Wi-Fi, or smart home devices that require constant network connectivity for status updates.
⚠️ Note: If you plan to use your router only as a bridge for another router, simply disabling Wi-Fi may not be sufficient. You should also disable the DHCP server and change the IP address to avoid network conflicts.
Frequently Asked Questions (FAQ)
Does turning off Wi-Fi affect wired internet speed?
No, disabling the wireless module does not directly increase the speed of a wired connection. However, it reduces the load on the router's processor and frees up radio spectrum, which can indirectly improve the device's stability, especially on older models with weaker hardware.
Is it possible to turn off Wi-Fi for guests only?
Yes, most modern routers Rostelecom Support the "Guest Network" feature. You can create a separate hotspot with speed limits or temporary access without disabling the main network for your devices.
Will a router reset Wi-Fi settings after a reboot?
If you saved the settings correctly (clicked the "Apply" or "Save" button), Wi-Fi will remain disabled after a reboot or power surge. A reset only occurs with a hard reset using the button. Reset on the body.
Will TV work via cable if I turn off Wi-Fi?
Yes, the wired connection (Ethernet) and telephony (if connected via LAN or a dedicated port) will continue to function normally. Disabling the radio module does not affect the physical ports or the fiber optic channel.