How to completely or temporarily disable Wi-Fi on a Digma modem: 5 proven methods

Disabling the wireless network on the modem Digma This can be useful in a variety of situations, from saving energy to protecting against unauthorized connections. Despite the apparent simplicity of the task, users often encounter difficulties—especially when it comes to budget models with non-standard web interfaces. In this article, we'll explore all the current methods for disabling Wi-Fi, including hidden features that manufacturers don't always advertise.

It is important to understand that the procedure may vary depending on firmware versions and a specific modem model. For example, in the line Digma Linx the algorithm differs from the series Digma Jet, and the new 2026-2026 revisions will feature additional security options. We will take all these nuances into account and provide universal solutions that work on 90% of the brand's devices.

If you've never accessed your router settings before, don't worry. We'll explain every step in detail, including accessing the admin panel, resetting your password, and troubleshooting potential errors. And for experienced users, we've prepared advanced methods, such as disabling via Telnet or the Task Scheduler.

1. Preparation: How to safely access your modem settings

Before disabling Wi-Fi, you need to access the device's web interface. This process is standard for most routers, but Digma There are a few features you should know about in advance.

The first thing you will need is Modem IP address. Usually it is 192.168.1.1 or 192.168.0.1, but in some models (for example, Digma Linx R1000) can be used 192.168.8.1You can find out the current address:

• 📄 On the sticker on the bottom of the device (look for the line "Default IP" or "Login Address")
• 🖥️ Via the Windows command line: run ipconfig and find "Default Gateway"
• 📱 In the mobile app Digma Wi-Fi (if installed)

The second important point is authorization data. By default this is a pair admin/admin or admin/password, but if you've changed them and now forgotten, you'll have to reset them. We'll cover this in detail in a separate section.

⚠️ Note: If you're connected to your modem via Wi-Fi, disabling the wireless network will disconnect your connection. Prepare an alternative access method in advance—for example, connect your device via an Ethernet cable or use your mobile data plan.

Once everything is ready, follow these steps:

1. Open any browser (we recommend Chrome or Firefox)
2. Enter the modem's IP address in the address bar and click Enter
3. Enter your login and password (if a warning about an insecure connection appears, ignore it)
4. You will find yourself in the main menu of the web interface.

2. Method 1: Disabling Wi-Fi via the web interface (universal method)

This is the most reliable and recommended method that works on all models. Digma, including Digma Jet 4G, Digma Linx R2000 And Digma EVEThe interface may differ slightly, but the general logic remains the same.

After successfully logging into the control panel:

1. Go to the section Wireless network (or Wi-Fi, Wireless)
2. Find the submenu Basic settings or Wi-Fi settings
3. Find the parameter Enable wireless broadcasting (or Enable Wireless)
4. Uncheck the box or move the switch to the position Off
5. Save the changes by clicking the button Apply or Save

In some firmware (for example, in Digma Linx R1500M (version 3.2.1) may require additional confirmation. If Wi-Fi continues to work after saving the settings, try:

• 🔄 Restart the modem using the button Reboot in the web interface
• 📵 Power cycle the device
• 🔍 Check if the function is active Guest network (it also needs to be disabled separately)

In Digma models with dual-band Wi-Fi (2.4 GHz + 5 GHz), you need to disable each network separately - the settings for them are located in different tabs.

3. Method 2: Quick shutdown using the WPS/Reset button

If you need to urgently disable Wi-Fi without entering the settings (for example, if you suspect that the network has been hacked), you can use the hardware button on the modem body. Digma This feature is not available on all models, but works on most devices released after 2022.

Algorithm of actions:

1. Find the button on the back of the modem that says WPS or Wi-Fi (sometimes it is combined with Reset)
2. Hold it for 3-5 seconds (until the indicator color changes or a sound signal is heard)
3. Release the button and Wi-Fi should turn off.

Important nuances:

• 🔴 On some models (Digma Jet 4G Lite) A short press turns WPS on/off, and a long press (10+ sec) resets the settings
• 🔄 After hardware disabling, Wi-Fi will automatically turn on the next time you start the modem
• 📡 This method does not disable the guest network - it must be deactivated separately through the web interface

⚠️ Attention: On models Digma EVE And Digma Linx R3000 The WPS button can be programmable. If the standard press and hold doesn't work, check its purpose in the section System Tools → Hardware Buttons.

4. Method 3: Scheduled shutdown (Wi-Fi timer)

If you need Wi-Fi to turn off automatically at a specific time (for example, at night), use the built-in scheduler. This feature is available in firmware versions 2.5 and later.

Setup instructions:

1. Go to the section Advanced Settings → Scheduler
2. Select Add a rule and specify the type Disabling Wi-Fi
3. Set the start and end time of the rule
4. Specify the days of the week (you can select individual days or set a repeat)
5. Save the rule and activate it

Example of setting for energy saving:

• 🕒 Shutdown: 23:00
• 🕘 Turn on: 07:00
• 📅 Days: Mon-Sun (daily)

Please note that in some firmware (Digma Linx R1500M v3.1.2) The scheduler only works when the time is synchronized with an NTP server. If the date and time are out of sync, the rule will not work.

5. Method 4: Disabling via the Digma Wi-Fi mobile app

For Android or iOS smartphone owners, it's more convenient to manage the modem using the official app. The app allows you to disable Wi-Fi in two clicks, but there are some important limitations.

Step-by-step instructions:

1. Download the app Digma Wi-Fi from Google Play or App Store
2. Connect to your modem's network (or via cable if Wi-Fi is already disabled)
3. Register or log in to an existing account
4. Select your modem from the list of devices
5. Go to the section Wi-Fi Management
6. Move the slider Wireless network in position Off

The advantages of this method:

• ⚡ Fast - no need to enter IP address and password
• 📱 Convenience - control from your phone from anywhere in the house
• 🔔 Notifications - the app will show if disabling failed

Flaws:

• 🚫 Doesn't work on models older than 2021
• 🔒 Requires registration and confirmation via email/SMS
• 📶 Requires an active modem connection (cannot be controlled remotely)

⚠️ Attention: In the attachment Digma Wi-Fi Versions 1.4.2 and below contain a bug that can cause the guest network to accidentally activate when the main network is disabled. Please update to the latest version before using this program.

6. Method 5: Advanced Methods for Advanced Users

If standard methods don't work or you need more flexible control, you can use alternative methods. They require some technical knowledge but offer more options.

6.1. Disconnecting via Telnet/SSH

Some models Digma (For example, Digma Linx R3000) support remote control via the command line. To do this:

1. Activate Telnet in the web interface (System Tools → Remote Management)
2. Connect via the program PuTTY or built-in terminal
3. Run the command:

iwconfig wlan0 txpower off
iwconfig wlan1 txpower off

Where wlan0 - the main network is 2.4 GHz, and wlan1 — 5 GHz (may be in some models) ath0/ath1).

6.2. Blocking via MAC filtering

An alternative way to "disable" Wi-Fi for all devices except authorized ones:

1. Go to Wireless Network → MAC Filter
2. Select mode Allow only specified
3. Leave the MAC address field blank.
4. Save the settings

This method does not disable the network itself, but makes it unavailable for connection.

6.3. Factory reset

If your modem is acting unstable and Wi-Fi won't turn off, perform a hard reset:

1. Press and hold the button Reset (usually in a recess on the back panel)
2. Hold for 15-20 seconds until the indicators start flashing randomly
3. After rebooting, the modem will return to factory settings.

⚠️ Note: Resetting your router deletes all settings, including passwords and ISP connections. Please have your ISP login and password, PPPoE/L2TP settings, and other necessary information ready for reconfiguration.

What to do if the Reset button doesn't work?

If the Reset button does not work, try:

1. Turn off the modem's power for 30 seconds, then repeat holding the button

2. Use a paperclip to press deeper (sometimes the contacts oxidize)

3. Update the firmware via emergency mode (if the modem supports TFTP)

In extreme cases, the hardware button may need to be repaired at a service center.

7. Typical problems and their solutions

Even after properly disabling Wi-Fi, users often encounter unexpected issues. Let's look at the most common issues and how to resolve them.

If your problem is not described in the table, try the following general steps:

• 🔄 Restart your modem (unplug it for 1 minute)
• 📋 Check the logs in the section System log for errors
• 🔧 Update your modem firmware to the latest version
• 📞 Contact support Digma indicating the model and firmware version

8. Frequently Asked Questions

Can I disable Wi-Fi on my Digma modem if I forgot my admin panel password?

Yes, there are two ways:

1. Reset the modem settings using the button Reset (all data will be deleted)
2. If your modem supports WPS, try disabling Wi-Fi using the hardware button (see Method 2)

After resetting, the password will become the default one (admin), but you will have to reconfigure your Internet connection.

Why is the network still visible on my phone after disabling Wi-Fi via the web interface?

Possible reasons:

• You disabled only one of the networks (2.4 GHz or 5 GHz), and the second one remained active
• Guest network is activated - check the section Guest network
• The modem did not save the settings (try rebooting it)
• Old information is cached on your phone - please restart your phone or refresh your network list.

How do I disable Wi-Fi on my Digma Jet 4G modem if the web interface is unavailable?

Try the following methods:

1. Hardware button: Press and hold the WPS button for 5 seconds (see Method 2)
2. Mobile application: Use Digma Wi-Fi, if the modem is connected to the Internet
3. SMS command: Send an SMS with the text to the modem number wifi off (does not work on all models)
4. Telnet: If the modem supports it, connect and run the command ifconfig wlan0 down

If nothing helps, the only thing left to do is reset the settings with the button Reset.

Will the Digma modem consume less power with Wi-Fi disabled?

Yes, but the savings will only be 10-15% of total consumption. The main load falls on the processor and internet connection module (ADSL/4G). For real savings:

• Turn off your modem at night (if you don't need the Internet)
• Use power saving mode (if available in settings)
• Replace your power supply with a more efficient one (marked 80 PLUS)

Average modem consumption Digma in mode without Wi-Fi: 3-5 W, with Wi-Fi: 5-8 W.

Is it possible to turn off Wi-Fi on a Digma modem remotely if I'm not at home?

Remote shutdown is only possible if two conditions are met:

1. The modem is connected to your account in the app. Digma Wi-Fi
2. The function is activated on the modem Remote control (chapter System tools)

If these conditions are not met, it is not possible to disable Wi-Fi remotely; physical access to the device or modem connected to the same network is required.

Alternatively, you can:

• Ask someone on site to press the hardware button
• Use a smart plug with a remote control (if the modem is connected through one)