Modern users often face the need to temporarily or permanently disable their wireless network. Owners of equipment from the Byfly (now A1) provider may be looking for an answer to the question of how to disable Wi-Fi on their modem for a variety of reasons, from saving energy to ensuring maximum data security. Disabling the wireless module It also helps reduce electromagnetic radiation levels at night or prevent the device from overheating under prolonged use.
The signal blocking procedure depends on the specific model of your router and firmware version. In most cases, management is performed via a web interface accessible via a local IP address. It's important to understand that after performing these steps, all wirelessly connected devices will lose internet access, so before beginning the procedure, ensure you have access to a cable or mobile data connection to continue working.
In this guide, we'll detail the operating procedures for the most common equipment models used in the provider's network. You'll learn about the interface's intricacies. Huawei And ZTE, as well as which settings may require additional attention. Proper configuration will allow you to flexibly manage network traffic without having to physically disconnect antennas or the device itself.
Preparing to set up your router
Before making any configuration changes, you must ensure a stable connection between your computer and the router. Cable connection This is the most reliable method, as the Wi-Fi module may be temporarily disabled during setup, which will result in a disconnected connection when using over-the-air control. Use an Ethernet cable, connecting it to the router's LAN port and the PC's network card.
Make sure your computer's network card settings are set to obtain an IP address automatically. This will allow the device to communicate correctly with DHCP server modem. If you previously changed the static IP address manually, reset the settings to "Obtain automatically" to avoid address conflicts.
⚠️ Important: If you plan to manage your router exclusively via Wi-Fi, please note that disabling the wireless network will result in you losing access to the web interface. You will need a cable to re-enable it.
It's also worth finding out your default gateway IP address in advance. These are typically standard addresses for Byfly equipment, but in rare cases, the provider may change them remotely. Checking your current connection only takes a minute, but it will save you from time-consuming searching through documentation for the necessary numbers.
Login to the web management interface
To get started, open any modern browser on a computer connected to the router. Enter the device's IP address in the address bar. For most models, Huawei And ZTE the standard address is 192.168.1.1 or 192.168.100.1After entering the address, press Enter.
The system will request authorization. You will need a username and password. By default, the login information is often listed on the back of the device, but your provider may have set their own credentials. The default login information often looks like this: admin / admin or root / admin.
If the default combinations don't work, check the sticker on the bottom of the router. It may contain a unique password for your specific model. In some cases, if the password was previously changed and lost, you may need to reset the device to factory settings using the reset button. Reset.
Disabling Wi-Fi on Huawei routers
Equipment brand Huawei is one of the most common devices on the Byfly network. The interface of these devices is generally logical and structured. After successful authorization, you'll be taken to the main status page, which displays the current network status.
To manage the wireless module, go to the section responsible for WLAN settings. Depending on the firmware version, this section may be called WLAN, Wireless or Wi-Fi Settings. Find the tab Basic Configuration or Basic settings.
In the menu that opens, you will see a switch or a checkbox with the name Enable WLAN or Enable WirelessUnchecking this box completely deactivates the radio module. Don't forget to press the button Apply or Save at the bottom of the page for the changes to take effect.
☑️ Check before disconnecting
After saving the settings, the Wi-Fi indicator on the router should turn off. This indicates that the signal has stopped broadcasting. If the indicator remains lit, try rebooting the device using the menu. System Tools → Reboot.
Setting up ZTE modems and other models
Device interface ZTE It may differ slightly from Huawei, but the general principle remains the same. After logging in, find the item in the top or side menu Network or Net. Next, select the subsection WLAN.
In the WLAN settings menu, look for the option Enable WLANIn some ZTE firmware versions, this function may be located in a separate tab. SSID SettingsMake sure you are editing the settings of the primary network (usually SSID 1) if you have more than one.
For some specific models used by the provider, the path may look different. For example, in older software versions, the path may be Application → WLAN ConfigurationIf you can't find the item you need, use the page search (Ctrl+F) and enter the word "Enable" or "Wireless".
What if the interface is in English?
If you're unsure of the translation of terms, search for "Wireless," "WLAN," "Radio," or "SSID." Disabling a feature is usually indicated by the word "Disable" or by unchecking the "Enable" box.
It's important to note that on some ZTE models, changes are applied instantly, without the need for a reboot. However, if the connection to the router is interrupted, simply refresh the browser page or reconnect the cable.
Table of standard addresses and passwords
For quick access to settings for various equipment models commonly used in provider infrastructure, use the following table. Data may vary depending on the year of manufacture of the device.
| Router model | IP address | Login | Password |
|---|---|---|---|
| Huawei HG8245H | 192.168.100.1 | telecomadmin | admintelecom |
| ZTE F660 | 192.168.1.1 | admin | admin |
| Huawei HG8045H | 192.168.100.1 | root | admin |
| ZTE F670 | 192.168.1.1 | user | user |
If the information in the table doesn't match, look for a sticker on the bottom of the device. The provider often replaces the default passwords with customized ones, which are listed on the sticker. Security Access to the admin panel is critically important, so do not use simple passwords.
Alternative ways to turn off the network
There are situations when access to the web interface is impossible or lost. In such cases, physical methods can be used. Some router models have a button on the back panel. WLAN or Wi-FiA short press on it can disable the wireless module, which is indicated by a change in color or the extinguishing of the corresponding indicator.
Another option is to use the provider's mobile app, if it supports your router model. Via the app My A1 (formerly Byfly) can sometimes control basic network settings, including turning Wi-Fi on and off, without entering the router's complex interface.
However, not all models have a physical button. Most budget options require software control. Therefore, knowing the IP address and password remains the most secure method of control.
Safety and shutdown frequency
Frequent switching of a router or its modules on and off can theoretically impact the lifespan of electronic components, even though modern devices are designed to withstand such loads. A more important aspect is security: by disabling Wi-Fi, you guarantee that your network is protected from external intrusion when you're not using the internet.
If you're disconnecting from the internet for an extended period of time (for example, when going on vacation), this is a great precaution. It prevents brute-force password attempts. Cybersecurity Home security starts with access control.
⚠️ Please note: Router interfaces and functionality may be updated remotely by your provider. If you don't see the above information, check the technical documentation for your specific model on the manufacturer's official website for the most current information.
It's also worth remembering that after turning Wi-Fi back on, devices may not connect automatically if you've changed any encryption settings. In this case, you'll need to re-enter the password on your smartphone or laptop.
Problem solving
Users may encounter a situation where after unchecking the box Enable WLAN The network connection persists. This could be due to browser page caching or a delay in applying settings on the router. Try clearing the browser cache or opening the interface in incognito mode.
If your router freezes after changing settings, a forced reboot may help. Unplug the device for 10-15 seconds, then plug it back in. After rebooting, the system will apply the saved configurations.
In rare cases, the issue may be browser-related. If the setting doesn't save, try using a different browser or device to access the admin panel. Interface compatibility with older browsers may be limited.
In conclusion, managing the wireless network on Byfly (A1) equipment is easy if you know the correct menu path. Whether it's a Huawei or ZTE model, the steps are the same: log in, find the WLAN section, and disable the module. By following the instructions, you'll be able to effectively manage your home network.
Is it possible to turn off Wi-Fi using a button on the router?
Most Byfly router models (Huawei, ZTE) don't have a dedicated physical button to completely disable Wi-Fi. The WPS/WLAN button typically serves as a quick pairing or short-term on/off switch, but it doesn't always function as a toggle switch. It's more reliable to use the web interface.
Will the Internet on my computer via cable disappear?
No, disabling the wireless module (Wi-Fi) does not affect the operation of a wired connection (LAN). Internet access on a computer connected via cable will continue to function normally.
What should I do if I forgot my router password?
If you changed your web interface password and forgot it, you'll need to perform a factory reset. To do this, press and hold the button Reset On the router body, press the power button for about 10-15 seconds. After this, the login and password will be the same as those on the sticker.
Does turning off Wi-Fi affect internet speed?
Technically, disabling Wi-Fi may slightly reduce the load on the router's processor, but it will have virtually no impact on wired internet speed. The main advantage is security and the absence of radio waves.