Managing a wireless connection is a basic skill for any home internet user, especially when it comes to a popular Belarusian provider. ByflyThe need to temporarily or completely deactivate Wi-Fi module This can occur for a variety of reasons, from basic energy savings and reducing electromagnetic radiation to improving network security while you're away. Furthermore, disabling the wireless signal often helps stabilize a wired connection if the router is experiencing channel congestion.
Modern modems provided by the operator are usually based on platforms ZTE, Huawei or Sagemcom, whose interface has its own peculiarities. Unlike simply turning off the button on the case, control via web interface Gives you complete control over your network settings. You can not only turn off the signal but also set a schedule, which is especially important for families with children or offices with fixed hours.
In this article, we'll detail the process of accessing router settings and describe step-by-step the procedure for disabling wireless networking on various hardware models. We'll also address security issues, explore alternative methods of restricting access, and answer frequently asked questions related to configuration. ByflyA thorough understanding of these processes will allow you to effectively manage your home network.
Preparing for setup and logging into the web interface
Before making any changes to your modem configuration, you need to ensure a stable connection between your computer and the router. The most reliable way to do this is to use LAN cable (Ethernet) by connecting it directly to one of the yellow ports on the back of the device. Although accessing the settings is also possible via Wi-Fi, disabling the wireless module risks losing connection to the admin panel if you don't save the settings correctly or if the connection is lost.
To access the control panel, you will need to know the IP address of the default gateway. In most cases, for equipment Byfly this is the address 192.168.1.1 or 192.168.0.1This information is also often found on a sticker located on the bottom or back of the modem, next to the login and password. Open any modern browser (Chrome, Firefox, Opera) and enter the address in the address bar.
The system will request authorization data. Standard credentials for modems ZTE And Huawei, used by the provider, often look like admin / admin or admin / passwordIf you've previously changed your password and forgotten it, you'll have to perform a factory reset using the button. Reset on the device body.
⚠️ Important: If you changed your Wi-Fi password and forgot it, and now can't connect via cable, don't reset your router. Try finding the saved password in your computer or smartphone's network settings to avoid losing other customized provider settings.
Find the wireless network section in the router menu
After successful authorization, the modem's main control panel will open. The interface may vary depending on the model (ZXHN H108N, F660, DG8045), but the menu layout logic remains similar. You need to find the tab responsible for wireless technologies. It's usually called Network, WLAN, Wireless or WLAN settings.
Within this section there are often several sub-items. Look for the menu titled WLAN Basic, Basic Security Settings or simply Basic settingsThis is where the switches that activate or deactivate the radio module are located. In some firmware versions Sagemcom This item may be hidden deep in the menu. Local Network.
If you're using a dual-band router that supports both 2.4 GHz and 5 GHz frequencies, be careful: the settings may be spread across different tabs or combined into a single switch. Make sure you're managing the specific band you want to disable, or select the global disable option. Radio.
⚠️ Note: Firmware interfaces can be updated remotely by the operator. The menu item layout may differ slightly from that described, so look for keywords related to WLAN or Wireless.
The procedure for completely disabling the Wi-Fi signal
Once you find the appropriate section, you will see a checkbox or switch with the title Enable WLAN, Wireless Radio or Turn on wireless network. Unchecking the box or moving the switch to the position Off (Off) will cause the signal to immediately stop broadcasting. The indicator on the front panel of the modem will usually go out. WLAN or Wi-Fi.
After changing the parameter, be sure to click the button Apply, Save or Save, located at the bottom of the page. Without this step, all changes will be lost after you refresh the page or your router. Your modem may require a reboot to apply the new settings; please agree to this.
It's important to understand that disabling Wi-Fi will disable all wireless devices (smartphones, tablets, TVs) and cause them to lose internet access. If you need to keep some devices connected to the network, this method isn't suitable. Instead, consider MAC address filtering, described below.
☑️ Check for Wi-Fi disconnection
Partial access restriction through MAC filtering
If your goal is not to completely turn off the router, but to block access by strangers or limit the time of use for children, it is more effective to use MAC filteringThis method allows you to create a "whitelist" of devices that are allowed to connect, while everyone else, even with the password, will not be able to access the network.
To configure, find the section WLAN MAC Filter or Address filtering in the wireless network menu. Here you need to activate the filter and select the mode Allow (Allow). Then the table will populate with unique identifiers for your trusted devices. You can find the MAC address in your phone or computer settings under "About device" or "Network status."
This method requires more time for initial setup, as it requires manually entering the addresses of all home devices. However, it provides a high level of security and allows for flexible access control without constantly turning the module on and off.
⚠️ Important: Be extremely careful when setting up MAC filtering. If you enable "Allow only listed" and don't add the MAC address of the device you're currently using, you'll lose access to the router and will have to reset it using the Reset button.
Comparison of Byfly modem models and interface features
The equipment used by providers varies, and setup details may vary. Below is a table to help you find the necessary settings for popular modem models commonly found among subscribers. Byfly.
| Router model | Path to Wi-Fi settings | Switch name | Peculiarities |
|---|---|---|---|
| ZTE ZXHN H108N | Network -> WLAN -> Basic | Enable WLAN | Classic interface, reboot required |
| Huawei HG8245H | WLAN -> WLAN Basic Configuration | Enable WLAN | There is a separate tab for 2.4G and 5G |
| Sagemcom F@st 3890 | Home Network -> Wireless | Wireless On/Off | Modern interface, changes immediately |
| Eltex NTU-RG-1401G-W | Wi-Fi -> General | Turn on Wi-Fi | Russified menu, clear interface |
Models ZTE often require a mandatory reboot after changing the radio module status, while Sagemcom And Eltex Apply settings instantly. This is important to consider if you plan to use automation or control scripts.
What if the interface is in English?
Use an online translator in your browser (such as the one built into Chrome) or a dictionary of technical terms. Key words: Wireless, Enable, Disable, SSID (Network Name).
Alternative control methods and security
In addition to manual shutdown via a browser, many modern routers support management via mobile apps from the manufacturer or provider. Check if your model has this feature. Byfly A supported app. This allows you to turn off Wi-Fi with a single tap from your smartphone, anywhere in the world, which is much more convenient than having to go into your browser settings every time.
It is also worth considering using the function Guest networkInstead of disabling your main Wi-Fi, you can enable guest access for visitors and disable it when no one is home. This keeps your smart home and essential devices connected without interrupting your connection.
Don't forget that physically disabling Wi-Fi is also a security measure. If you're going on vacation, completely disabling the wireless module via the web interface (in addition to setting a strong password) minimizes the risk of remote attacks on your local network by making your router invisible to network scanners within range.
Frequently Asked Questions (FAQ)
Does turning off Wi-Fi affect wired internet speed?
Yes, in some cases, disabling the wireless module can slightly improve the stability and speed of a wired LAN connection. This occurs because the router's processor no longer wastes resources servicing wireless clients and broadcasting the signal, reducing the overall load on the device and reducing heat generation.
Will the router settings be reset when the power is turned off after turning off Wi-Fi?
No, the settings are saved via the button Save/Apply Settings in the web interface are written to the device's non-volatile memory. After powering off and back on, the modem will remain in a disabled state. A reset will only occur if the Reset button is pressed.
Is it possible to turn off Wi-Fi remotely if I'm not at home?
This can't be done using standard browser tools from an external network unless remote access is configured (which is unsafe). However, if your router supports cloud management or your provider Byfly There is a personal account with a home network management function, this feature can be implemented there.
Why does the router indicator stay on after turning off Wi-Fi in the settings?
This may indicate that the settings weren't applied (you forgot to click "Save") or that the router needs to be rebooted. Also, on some models, the indicator may blink or glow dimly, indicating that the module is software-enabled but not broadcasting a signal, or it may glow if the WPS function is activated.