Modern subscribers often face the need to manage the wireless module of their home equipment. The question of how to disable Wi-Fi on a Byfly becomes relevant for various reasons: from simple security concerns to the desire to reduce electromagnetic radiation levels at night. Many ISP users Beltelecom They use routers from different manufacturers, and the settings interface may differ significantly.
In most cases, standard modems provided by your carrier operate 24/7, constantly broadcasting a signal. This is convenient for smartphones, but creates network vulnerabilities if you don't use a wireless connection constantly. Disabling Wi-Fi Allows you to force all devices to switch to a wired connection, which guarantees stability and protection from unauthorized access.
The module deactivation procedure doesn't require extensive networking knowledge. All you need is a computer or laptop connected to the router via cable and access to the device's web interface. Below, we'll detail the steps for the most popular network equipment models. ByFly.
Preparing to change router settings
Before making any changes to your hardware configuration, ensure a stable connection. If you attempt to change your wireless network settings while connected to Wi-Fi, the connection will be lost immediately after the settings are applied. cable connection is a mandatory requirement.
You'll need an Ethernet cable (patch cord), which is usually included with your router. Connect one end of the cable to the device's LAN port and the other to your computer's network card. Make sure the LEDs on the ports light up or blink, indicating physical contact.
It is also important to know the login address for the control panel. For equipment ByFly the standard address is most often 192.168.1.1 or 192.168.0.1The default login and password are usually located on a sticker on the bottom of the device. If you've changed these details previously, use the current credentials.
⚠️ Note: Firmware interfaces can be updated remotely by your operator. If the menu items described below are missing, check your router's exact model on the official support portal or in your subscriber account.
Login to the device's web interface
After physically connecting the cable, open any browser on your computer. In the address bar, enter your router's IP address. The most common address for gateways ByFly is 192.168.1.1Press Enter to go to the authorization page.
The system will ask for a login and password. For ZTE and Huawei devices provided by the operator, the standard pair is often admin And admin, or user And userHowever, on modern models, the device's serial number or unique password may also be printed on a label on the bottom of the case.
If you can't log in, your password may have been changed previously. In this case, you will need to reset settings to factory settings. To do this, hold down the button on the router while it's turned on. Reset with a thin object for 10-15 seconds until the indicators reset.
What should I do if the page doesn't load?
Make sure your computer's network card settings are set to obtain an IP address automatically (DHCP). If a static address from a different subnet is assigned, accessing the router will be impossible without manually changing the IP address.
Disabling Wi-Fi on ZTE routers (models F660, F670)
Equipment brand ZTE is one of the most popular in the provider's network. The interface of these devices has a classic menu structure. After successful authorization, go to the top tab Network (Network). Select the item from the drop-down list. WLAN.
Next, you will see the basic wireless network settings menu. Find the subsection Basic or SecurityThis is where the main switch is located. You need to uncheck the box. Enable WLAN or Enable WirelessAfter unchecking the box, the Apply Settings button will become active.
Click the button Submit or Apply in the lower right corner of the screen. The router will apply the changes, and the wireless signal will disappear. All devices previously connected via wireless will lose their connection. To re-enable the feature, you'll need to repeat the process and check the box.
- 📶 Go to the menu
Network→WLAN→Basic. - 🚫 Uncheck the checkbox
Enable WLAN. - 💾 Click the button
Submitto save the parameters. - 🔌 Check if the network has disappeared on your smartphone or tablet.
In some ZTE firmware versions, settings may be separated by band. If you have a dual-band router, make sure you've disabled both the 2.4 GHz and 5 GHz modules, if this option is available in a separate tab.
Wireless network settings on Huawei equipment
Routers Huawei, such as the popular HG8245H or HS8545M5 models, have their own interface, which may differ from ZTE's. Once logged in, pay attention to the top menu. You're looking for the tab WLANIn some older firmware versions it may be called Wireless.
In the menu that opens, select the item WLAN Basic ConfigurationHere you'll see a list of radio modules. There are usually two: one for 2.4G and one for 5G. To completely disable Wi-Fi on the Byfly, you need to find the switch. Enable WLAN or WLAN Radio Enable.
Uncheck the box next to each active range. After doing this, be sure to scroll down the page and click the button ApplyWithout this step, the changes will not be saved, and after a reboot, the router will begin broadcasting the network again.
☑️ Check for Wi-Fi disconnection
It is worth noting that on some models Huawei With the updated interface (often called the "green interface") the path may look different: More Functions → WLAN Settings → WLAN Basic SettingsThe logic remains the same: we look for the radio module's status switch.
Managing Wi-Fi on Sercomm devices
Equipment Sercomm (for example, the FG801AM model) is less common, but is also widely used. The interface of these devices is often more detailed. After logging in, find the section in the main menu Setup or Settings.
Inside the section, look for the tab Wireless or Wi-Fi SettingsUnlike previous models, there may not be a single "Turn off all" button. You'll need to go to the subsection Basic for each range (2.4 GHz and 5 GHz) and change the parameter Wireless Radio for meaning Disable or Off.
After changing the status for both ranges, do not forget to save the settings with the button Save or Apply ChangesThe router may warn you that wireless devices will be disabled. Confirm the action.
| Router model | Path to the menu | Disable option | Action |
|---|---|---|---|
| ZTE F660/F670 | Network > WLAN > Basic | Enable WLAN | Uncheck the box |
| Huawei HG8245H | WLAN > WLAN Basic Config | Enable WLAN | Uncheck the box |
| Sercomm FG801 | Setup > Wireless > Basic | Wireless Radio | Select Disable |
| Eltex (rare) | Wi-Fi > Basics | Turn on Wi-Fi | Turn off the toggle switch |
Alternative methods: mobile app and button
Not all router models ByFly allow you to manage Wi-Fi via a web interface with equal convenience. Modern devices often support control via mobile apps or have a physical button. alternative methods, which can be useful if access to a computer is limited.
Physical button WLAN or Wi-Fi It may be located on the router's body. A short press (or a long press, depending on the model) turns the wireless module on and off. Pay attention to the wireless network indicator: if it's off, the function is disabled.
However, on many office models provided by providers, this button is software-locked or disabled by default. In this case, the browser-based software method remains the only viable option.
⚠️ Caution: Do not attempt to power off the router by unplugging the power cord as a way to disable Wi-Fi. This may damage the device's file system and require a firmware update.
Security issues and network hiding
Disabling Wi-Fi completely is a radical security measure. However, sometimes users don't just want to turn off the network, but rather make it invisible to outsiders. This is called hiding the SSIDIn this case, the router continues to operate, but does not broadcast the network name.
To implement this function, you need to find the item in the WLAN settings (in the same sections where we disabled the network) Hide SSID or Broadcast SSID and select a value Disable or HiddenAfter this, you can only connect to the network by manually entering your username and password.
This method doesn't provide 100% protection from professionals, but it does prevent accidental connections from neighbors. If maximum security is your goal, completely disabling the module, as described above, is a more reliable solution.
Frequently Asked Questions (FAQ)
Does turning off Wi-Fi affect wired internet speed?
No, disabling the wireless module does not affect internet speed over a cable. In fact, it may even slightly reduce the load on the router's processor since it doesn't need to service wireless clients, which could theoretically improve the stability of a wired connection.
Do I need to reboot my router after disabling Wi-Fi?
In most cases, changes take effect immediately after clicking "Apply" or "Submit." A device reboot is not required. However, if the network connection persists, perform a manual reboot.
Is it possible to turn off Wi-Fi remotely if I'm not at home?
Not through the standard web interface, unless you've set up remote management (which is not recommended for security reasons). However, some modern routers support management via cloud services or dedicated provider apps, if this feature is enabled.
Will the Wi-Fi off setting be reset when I reset my router?
Yes, when executed Hard Reset (factory reset) All your changes, including disabling the wireless network, will be lost. The router will return to its factory default state, where Wi-Fi is usually enabled by default.
Will the router heat up less if I turn off Wi-Fi?
The Wi-Fi radio module consumes power and generates heat. Disabling it will reduce the overall load on the device and the case temperature, which can positively impact the lifespan of the electronics, especially in hot weather.