MGTS, a modern provider, provides subscribers with high-speed internet access using advanced GPON technology. However, not all users require a constantly active wireless network, especially if they have a desktop computer or smart devices that only work via cable.
Disabling Wi-Fi may be necessary for various reasons: from simply reducing electromagnetic radiation at night to redirecting all traffic to a wired connection for maximum stability. In this article, we'll discuss how to properly and safely disable the wireless module on operator terminals.
It's important to understand that the setup procedure may vary slightly depending on your equipment model. MGTS most often installs devices from the following brands: Eltex And Huawei, are less common ZTEWe'll review the steps for the most popular models so you can choose the right one.
Why disable the wireless network on the ISP's terminal?
Many users mistakenly believe that a router should operate at maximum power 24/7. However, there are situations when disabling Wi-Fi is a more rational solution for a home network. This primarily concerns security: while the module is active, there is a theoretical risk of data interception or unauthorized access attempts, even with a password.
Additionally, completely disabling the radio module helps reduce heat generation. Terminals operating 24/7 with the 2.4 GHz and 5 GHz bands activated can generate more heat, which can impact the long-term lifespan of the electronics. If you're using a wired connection only, LAN, then the function becomes an unnecessary load on the router’s processor.
⚠️ Please note: If you have an IPTV service connected via Wi-Fi or smart plugs controlled wirelessly, disconnecting the network will result in loss of connection to these devices.
Energy conservation is also worth mentioning. Although the router's power consumption is low, operating two radio bands year-round adds significant kilowatt-hours to your electricity bill. For those concerned about ecology and saving money, periodically turning off the wireless interface is a useful habit.
Login to the MGTS router control panel
Before making any changes to the network configuration, you need to access the device's web interface. To do this, you'll need a computer or laptop connected to the router via an Ethernet cable. Make sure the indicator light is on. LAN on the device body lights up or flashes, indicating a connection.
Open any modern browser and enter the gateway's IP address in the address bar. By default, MGTS equipment most often uses the address 192.168.1.1 or 192.168.100.1The exact address, as well as the login and password for entry, are usually indicated on a sticker located on the bottom or back of the device.
In the authorization window that opens, enter your credentials. The default login is often admin or user, and the password can be unique for each device (indicated on the sticker) or standard (for example, admin). If you previously changed your password and forgot it, you may need to reset your device to factory settings.
After successful authorization, you'll be taken to the main control panel page. The interface may look different depending on the firmware version, but the basic menu structure is generally the same. Look for sections labeled "Network," "WLAN," "Wi-Fi," or "Wireless Network."
Instructions for Eltex (NT-ERX) routers
Company equipment Eltex is one of the most common terminals on the MGTS network. These terminals are stable, but have a specific settings interface. To disable the wireless network, go to the top menu and select the Service or Network.
Find the item in the side menu WLAN or Wireless. The settings for both frequency ranges will be presented here. You need to find the switch Enable Wireless or a tick Enable WLANUnchecking this box completely deactivates the radio module.
Don't forget to press the button Apply or Save at the bottom of the page to save your changes. Without this step, after rebooting the router, the settings will revert to their previous state, and the network will become active again.
☑️ Checking Wi-Fi disconnection on Eltex
In some versions of Eltex firmware, the settings may be divided into sub-items Basic And SecurityThe main switch is usually located in the basic settings. If you don't see the global switch, try disabling the SSID (network identifier) broadcast. This will hide the network but won't completely disable the module.
⚠️ Note: The Eltex equipment interface can be updated remotely by the operator. If you don't find the described options, check the current menu structure in your MGTS personal account or the technical documentation for your specific terminal model.
Setting up Huawei HG8245H terminals and similar devices
Routers Huawei have a more user-friendly and intuitive interface, often with graphical elements. After logging in (usually at 192.168.100.1) pay attention to the top menu bar. Do you need a section WLAN.
Within a section, select a subsection WLAN Basic ConfigurationHere you'll see a list of available wireless networks (SSIDs). There are usually two: one for 2.4 GHz and one for 5 GHz. Each one has a checkbox. Enable WLANTo turn off Wi-Fi, simply uncheck the boxes next to the desired bands or both at once.
There is also the possibility of using the function WLAN Switch on the main status page, unless your provider has hidden this option. This allows you to quickly turn the network on and off without diving deep into the menu. After making changes, be sure to click Apply.
What should I do if the Apply button is grayed out?
If the save button is grayed out, check if you have an administrator user profile. A standard user often has limited rights and can't change global network settings. Try logging in with the admin account, which you can find on the sticker or obtain from support.
It's important to note that on some Huawei models, changes take effect immediately, and you may lose your connection to the router if you tried to configure it via Wi-Fi. Therefore, it's recommended to use a cable connection when performing such operations.
Comparison of shutdown methods: software and physical
Users often wonder which method of disabling a wireless network is most effective. There are two main approaches: disabling it through software settings and physically disabling the device. Each has its own advantages and disadvantages.
| Method | Efficiency | Complexity | Security |
|---|---|---|---|
| Via the web interface | High (complete shutdown of the module) | Intermediate (requires knowledge) | Safe for equipment |
| Mobile application | High (remote control) | Low (intuitive) | Depends on account protection |
| Physical button | Medium (not available on all models) | Low (press and forget) | Risk of mechanical wear |
| Removing antennas | Low (signal remains, but weaker) | High (risk of breakage) | Not recommended (warranty voided) |
The software method via the web interface is the most preferred, as it guarantees complete signal interruption and requires no physical intervention. The MGTS Dom mobile app also provides a convenient management method if the router's functionality supports integration.
Physically disabling the antennas or using the button on the device (if present and configured appropriately) may be less reliable. For example, the button may simply reboot the device rather than disable Wi-Fi unless specifically programmed to do so.
Alternative methods of access control
If your goal isn't to completely disable Wi-Fi, but to restrict access by strangers or children, there are more flexible tools. Instead of turning off the network completely, you can use the MAC filteringThis will allow you to whitelist allowed devices while denying access to all others.
Many modern routers also support a "Guest Network" feature. You can create a separate SSID with limited access to the local network and a temporary validity. This is ideal for parties or when guests are visiting and you don't want to share the password to your main network.
Parents will find the parental control feature built into the MGTS router control panel useful. It allows you to schedule internet access for specific devices, automatically blocking Wi-Fi at night.
⚠️ Please note: Parental control settings and Wi-Fi schedules may be reset when your router firmware is updated by your operator. Please check your blocking rules regularly to ensure they are up-to-date.
Possible problems and their solutions
Users may encounter difficulties during the setup process. It often happens that after saving the settings, the router stops responding or the Wi-Fi doesn't turn off. In such cases, the first step is to check whether the changes were saved. Try refreshing the browser page or re-entering the menu.
If the interface freezes or stops loading, try rebooting the device via the power button or via the web interface (System Tools → Reboot). In rare cases, clearing your browser cache or signing in from a different browser (for example, using Firefox or Edge instead of Chrome) can help.
There are situations when a provider blocks the ability to change certain parameters remotely. In these cases, standard methods may not work. The only solution is to contact MGTS technical support to clarify the capabilities of your terminal model.
The router does not save settings
If the settings reset after a reboot, the device's log file may be full or the file system may be corrupted. Try a factory reset, but keep in mind that this will delete all your personalizations and may require re-authorization for PPPoE.
Frequently Asked Questions (FAQ)
Does turning off Wi-Fi affect wired internet speed?
In theory, disabling the wireless module frees up the router's processor resources, which may slightly improve the stability of a wired connection. However, at the high speeds offered by MGTS, the difference will be virtually imperceptible to the average user.
Do I need to reconfigure my router after disabling Wi-Fi?
No, the settings are saved in the device's memory. However, if you decide to re-enable the wireless network, you'll need to re-enter the menu and enable the appropriate checkboxes. The network name (SSID) and password will remain the same.
Is it possible to turn off Wi-Fi using an app on my phone?
Yes, if you use the official MGTS Dom app and your router supports this feature. The app often has a Wi-Fi toggle switch, which is faster than logging in through a browser.
Will the router heat up less without Wi-Fi?
Yes, the radio module is one of the heat sources in the device. Disabling it will reduce the overall case temperature, which will positively impact the longevity of the components, especially in the summer.
What should I do if I forgot my router settings password?
If the default password on the sticker doesn't work, you'll need to reset the router using the button on the device. This will reset the router to factory settings, and internet access may be lost until your provider reconfigures it.