How to Completely Disable a Beltelecom WiFi Hotspot: 5 Proven Methods

Access point Beltelecom WiFi — This is the standard solution for internet tethering from Belarusian providers, but sometimes it needs to be disabled. The reasons can vary, from wanting to replace equipment to needing to temporarily suspend network sharing. In this article, we'll cover all the current methods for disabling internet, from simple to technically complex, and explain how to avoid common mistakes when adjusting settings.

It's important to understand that disabling a hotspot doesn't always mean you stop paying for internet. If you're trying to save money on your plan, first check the terms in your personal account. Beltelecom or by phone support. We'll focus exclusively on the technical side of the issue: how to physically or programmatically disable Wi-Fi hotspots without disrupting your primary connection.

This article will be useful for both novice users and those who have already tried to disable the access point but encountered difficulties. All instructions are adapted for current router models. Beltelecom (including Sercomm H500-s, ZTE H298A and others), but the principles given are universal for most provider devices.

1. Disabling Wi-Fi via the router's web interface

The most reliable method is to go to your router's control panel and manually disable the wireless network. This method works regardless of the device model, as long as you have access to its settings.

To open the web interface, follow these steps:

• 🔌 Connect your computer or laptop to the router via LAN cable (recommended) or connect to its Wi-Fi.
• 🌐 In the address bar of your browser, enter 192.168.1.1 or 192.168.0.1 (the address may differ - see the sticker on the router).
• 🔐 Enter your username and password to log in. By default, this is often admin/admin or user/user, but if the data has changed, use the current one.

After logging in, go to the wireless network management section. The path may vary:

• 📡 Wireless → Basic Settings (for English-language firmware)
• 📶 Wireless Network → Wi-Fi Settings (for Russified interfaces)
• ⚙️ Network → WLAN (in some models ZTE)

Find the option "Turn on wireless network" (or Enable Wireless) and uncheck the box. Save the changes with the button Apply or SaveWi-Fi will be disabled immediately after rebooting the router (if required).

Connect to the router via cable | Check the IP address for login | Verify the login/password (see the sticker) | Find the "Wireless Network" section | Uncheck the Wi-Fi option | Save settings

-->

⚠️ Attention: If after disabling Wi-Fi the wired internet is also lost, check whether the mode is activated Bridge or whether the settings were reset PPPoEIn this case, you will need to re-configure the connection to Beltelecom.

2. Disconnection via your Beltelecom personal account

The provider allows you to manage some router functions remotely through your personal account on the official website. This method is convenient if you don't have physical access to the device or prefer not to fiddle with its settings.

Instructions:

1. Go to the website my.beltelecom.by and log in.
2. Select a section from the menu Services → Internet.
3. Find the block My Devices or Router Management (the name may differ).
4. Select your router from the list and click on the option Wi-Fi Management.
5. Turn off the slider or uncheck the box next to Turn on Wi-Fi.

Changes take 1-2 minutes to apply. Please note that not all router models support remote management via your personal account. If this option is unavailable, use the other methods in this article.

Via the web interface|Via the mobile app|Via the provider's personal account|Call support|I don't manage it, everything is configured out of the box

-->

⚠️ Attention: In your personal account Beltelecom Sometimes the Wi-Fi status displayed is out of date. If the network continues to be available after disconnecting, check the settings directly through the router.

3. Using the "My Beltelecom" mobile application

For smartphone owners, it's more convenient to manage the router through the official app. It's available for Android And iOS and allows you to turn off Wi-Fi in a few taps.

How to do it:

1. Download and install the application My Beltelecom from App Store or Google Play.
2. Log in using your personal account login.
3. Go to the section Internet → My Devices.
4. Select your router and tap on the icon "Wi-Fi".
5. Move the slider to the position "Off".

The app also displays a list of connected devices, which is useful for diagnostics. For example, if after disconnecting you see that devices are still connected to the network, it means the settings haven't been applied (try rebooting the router).

4. Physically disconnecting the router

If software methods don't work or you don't have access to the settings, you can simply unplug the router. This is a drastic but effective solution—Wi-Fi will disappear immediately after the device is turned off.

How to disable correctly:

• ⚡ Unplug the power supply from the socket (do not press the button Power on the router - it may not turn off the power completely).
• 🔌 If the router is connected via PoE (Power over Ethernet), disconnect the network cable.
• 🔄 For a full reset, hold the button Reset 10-15 seconds (this will reset to factory settings, including Wi-Fi being turned on!).

Important: If your plan is tied to your router's MAC address, physically disconnecting it may temporarily result in a loss of internet access until you re-authorize. Please check this with support. Beltelecom, if you plan to turn off the device for a long time.

5. Scheduled Wi-Fi shutdown

If you only need to turn off your access point at certain times (for example, at night), set up a schedule on your router. This feature is available on most modern models. Beltelecom.

How to set up:

1. Go to the router's web interface (see Section 1).
2. Go to Wireless → Schedule or Wireless Network → Schedule.
3. Activate the option "Enable Schedule".
4. Specify the days of the week and time intervals when Wi-Fi should be turned off (for example, from 23:00 to 7:00).
5. Save the settings.

The schedule is activated automatically, but check its operation during the first 24 hours—some routers require a reboot for the changes to take effect.

What to do if the schedule doesn't work?

If Wi-Fi doesn't turn off on schedule, check:

1) The correctness of the specified time (note that the router may use the provider’s time, not your computer’s).

2) The router firmware—older versions can have scheduling bugs.

3) Conflict with other settings (e.g. guest network).

If the problem persists, reset your router to factory settings and set up the schedule again.

6. Wi-Fi Disconnection Problems and Solutions

Even after completing all the steps, Wi-Fi may still work. Let's look at common causes and troubleshooting steps.

Problem 1: After disabling it in the settings, Wi-Fi is still active.

• 🔄 Reboot your router (turn off the power for 30 seconds).
• 🔍 Check if it is enabled guest network (it may have a separate switch).
• 🛠️ Reset your router using the button Reset and configure it again.

Problem 2: Unable to log in to the web interface.

• 🔧 Check your router's IP address (it may be 192.168.10.1 or another).
• 🔐 Make sure you are using the correct login/password (see the sticker for default).
• 📡 Connect to your router via cable—sometimes Wi-Fi blocks access to settings.

Problem 3: There is no Wi-Fi management option in your personal account.

• 📱 Try the mobile app - it may have more features.
• 📞 Contact support Beltelecom (telephone 123) and check if your model supports remote control.

⚠️ Attention: If the router is rented from Beltelecom, completely disabling it (especially resetting it) may violate your contract. Before taking any drastic action, check with your provider about the permitted methods of controlling the device.

FAQ: Frequently asked questions about disabling Beltelecom WiFi

Is it possible to turn off Wi-Fi but leave wired internet?

Yes, disabling the wireless network does not affect the operation LAN-ports. Wired internet will work if:

• 🔌 The cable is correctly connected to the port WAN or Internet on the router.
• ⚡ Settings PPPoE (login/password from Beltelecom) did not get lost.
• 🔄 The router did not switch to the mode Bridge (bridge).

If after disabling Wi-Fi the wired internet is also lost, check the connection status in the section Network → WAN.

How do I disable Wi-Fi on a Beltelecom H500-s router?

For the model Sercomm H500-s the path is this:

1. Log in to the web interface at 192.168.1.1.
2. Go to Wireless → Basic.
3. Uncheck the box Enable Wireless for both ranges (2.4GHz And 5GHz).
4. Click Apply.

If there is no item in the menu Wireless, update the router firmware.

Will there be any savings if I turn off Wi-Fi?

No, disabling the access point does not reduce the cost of the tariffYou pay for internet connection, not Wi-Fi sharing. However, this may:

• 📉 Reduce router power consumption (energy savings of ~1–2 kW/month).
• 🛡️ Improve security (closed networks are less susceptible to hacking).
• 📶 Reduce interference with other wireless devices.

To save on internet, change your plan in your personal account or disable the service through support.

Is it possible to turn off Wi-Fi remotely if I'm not at home?

Yes, if:

• 📱 You have the app installed My Beltelecom and the router supports remote control.
• 🌐 You can log into your personal account on the website and there is an option to manage Wi-Fi.
• 🔧 Access from the external network is enabled on the router (option Remote Management in the settings).

Without these conditions, it is impossible to disable Wi-Fi remotely; physical access to the device is required.

What should I do if my router stops distributing internet after disabling Wi-Fi?

This is a typical problem if:

• 🔌 The settings are lost PPPoE (check login/password from Beltecom in the section WAN).
• ⚙️ The router has switched to bridge mode (Bridge). Disable it in the settings.
• 🔄 The settings have been reset. Please reconfigure your connection or restore your configuration from a backup.

If you are unsure about what to do, call support. Beltelecom (123) and ask for help with diagnosis.