How to limit WiFi speed for other Netis users

In today's digital world, with smartphones, laptops, smart TVs, and gaming consoles all connected to a home network, bandwidth is often at risk of being overloaded. When one user starts actively downloading files or watching 4K videos, it can lead to the internet practically ceasing for other family members or office colleagues. This is precisely the situation in which router owners Netis are wondering how to properly distribute traffic to ensure comfortable network use for everyone.

Fortunately, this brand's equipment, even budget models, features features that allow you to control the bandwidth of each connected device. The setup process doesn't require in-depth knowledge of networking technologies, but it's critical for the stability of your local environment. In this article, we'll take a detailed look at how to limit Wi-Fi speeds for other Netis users using built-in traffic management tools.

Before making any changes, it's important to understand that bandwidth management is performed through the router's web interface. It can be accessed from any device connected to the network, whether it's a wired connection or a wireless signal. It's important to know this in advance. MAC addresses those devices for which you plan to set limits, since it is by this unique identifier that the system will recognize a specific client.

Getting ready for setup: Logging into the Netis web interface

The first step for any home network administrator is to log into the router's control panel. To do this, open any web browser and enter the device's standard IP address in the address bar, which is the default for most models. Netis makes up 192.168.1.1 or netis.ccIf the address has been changed previously, check the label on the bottom of the device or use the command line for the default gateway.

After entering the address, the system will ask for login information. The default login and password is often the word admin, unless you changed them during the initial security setup. Enter your information carefully, as multiple unsuccessful attempts may temporarily block access to the interface from your IP address. After successful login, you will see the main menu with a network map and connection status.

⚠️ Important: If you changed the administrator password and forgot it, the only way to regain access is to perform a hard reset by holding the button on the router for 10 seconds. This will restore the device to factory settings, including the network name and Wi-Fi password.

The interface may vary slightly between models, but the menu layout remains consistent across the entire lineup. Navigation is typically via the top or side horizontal menu. Ensure the device you're using for setup has a stable connection to avoid session interruptions at a critical moment.

Identifying devices on a local network

Before applying restrictions, it is necessary to precisely determine which device belongs to which user. In routers Netis For this purpose, there is a section displaying a list of active clients. Go to the menu Status or Wireless mode -> Client ListAll the information necessary for further work is displayed here.

In the table, you'll see IP addresses, MAC addresses, and, if the devices have already transmitted data, their names. Pay attention to the connection type column: it will indicate whether the device is connected via cable or Wi-Fi. For accurate identification, we recommend checking the MAC addresses against the device's settings or temporarily disabling suspicious devices, watching for the lines to disappear from the list.

It's recommended to write down the MAC addresses of the devices whose speed you want to limit. This can be done on paper or saved in a text file. Some models allow you to assign user-friendly names to devices directly in the router interface, which significantly simplifies navigation in the future. The IP address reservation feature is also useful to prevent limits from being reset after a client reboot.

Setting up speed limiting via QoS

The main tool for traffic management in routers Netis is a function QoS (Quality of Service)This mechanism allows you to prioritize some data packets over others or set strict bandwidth limits. You can find this section in the menu. QoS or Bandwidth Control depending on the firmware version.

To start working, you need to activate the function by setting the switch to the position EnableNext, the system will ask you to enter the total bandwidth of your internet connection (uplink and downlink). You can get this information from your provider or measure it yourself using speed testing services. Don't enter the maximum theoretical speed; it's better to underestimate it by 10-15% to be on the safe side.

Calculation example:
If your tariff is 100 Mbps, please indicate:
Downlink: 85000 Kbps
Uplink: 85000 Kbps

After specifying the general parameters, we move on to creating rules. You need to add a new rule, specifying an IP address range or a specific IP of the target device. In the speed field (Up/Down), enter values ​​in kbps. Remember that 1 Mbps equals 1024 kbps. Properly configuring these parameters will allow you to effectively limit the Wi-Fi speed for other Netis users without affecting your important clients.

Address reservation for rule stability

Effective speed management is impossible without static IP addresses. By default, the router assigns addresses dynamically via DHCP, and when reconnecting, the device may receive a new IP address, causing previously created QoS rules to no longer apply. To avoid this problem, use the Address Reservation (Address reservation).

This tool is usually located in the section Network -> DHCP server -> Address reservationHere you create an entry by associating the MAC address of a specific device with a fixed IP address. For example, a TV will always be assigned an address 192.168.1.50, and the laptop - 192.168.1.51.

After adding the entries, be sure to click the "Save" button and reboot the DHCP server or the router itself. Only then will the devices receive new permanent addresses, and the speed limiting rules associated with these IP addresses will begin to function correctly and predictably.

Wireless client control and filtering

In addition to the speed limit, the interface Netis proposes more radical control measures. In the section Wireless mode -> MAC Filtering You can completely block access to unwanted devices. This is useful if you detect an unknown user "stealing" your Wi-Fi.

There are two filtering modes: "Allow" (White List) and "Black List." In "Deny" mode, you enter the MAC addresses of those devices to which access is denied. In "Allow" mode, only devices on the list are granted access, which is the most secure option for a home network, although it requires manual registration of each new device.

⚠️ Note: Firmware interfaces may be updated by the manufacturer. The location of menu items or their names may differ from those described in the manual. If you don't find an exact match, look for synonyms (e.g., Bandwidth Control instead of QoS).

Also worth paying attention to is the function Guest NetworkIf your model has this option, it's best to assign a separate SSID for guests and children. You can set separate speed and access time limits for the guest network, eliminating the need to fine-tune rules for each device on the main network.

Typical problems and solutions

During setup, users often encounter problems with the limits they've set, either not working or not working correctly. One common cause is incorrectly calculated units of measurement. Providers specify speeds in megabits (Mbps), while routers often require kilobits (Kbps). A tenfold error will result in either a complete block or no effect.

Another issue is caching settings on client devices. After changing router settings, it's recommended to disable Wi-Fi on your phone or computer and then re-enable it so the device re-requests an IP address and applies the new network policies. Sometimes a full router reboot is required for the changes to take effect.

If you set too strict a limit (for example, less than 512 kbps), modern websites and apps may stop loading, displaying timeout errors. The optimal minimum threshold for basic web surfing is considered to be around 1-2 Mbps per device. Video calls require 3-4 Mbps.

FAQ: Frequently Asked Questions

Will the speed setting be reset after rebooting the router?

No, all settings, including QoS rules and IP address reservations, are saved in the device's non-volatile memory. After a reboot or power surge (if the router is turned on), all rules will remain in effect. A reset occurs only when executing the "Restore Factory Defaults" command.

Is it possible to limit the speed for just one application, such as torrents?

Using standard tools of household routers Netis Limiting speeds by applications (ports) is difficult, as QoS functionality there typically operates at the IP address level. Deep packet filtering (DPI) requires more expensive hardware or the installation of alternative firmware, which may void the warranty.

Why is the actual speed lower than set in the settings?

The final speed is affected by many factors: Wi-Fi signal strength, interference from neighboring networks, router CPU load, and the quality of the provider's cable. QoS settings only set a software ceiling, but the physical connection layer can make its own adjustments.

Does speed limiting affect ping in games?

Yes, properly configuring QoS can improve ping (reduce latency) if you prioritize your gaming device. However, simply hard-cutting the speed without prioritizing it can lead to an unstable connection and packet loss.