Setting up Wi-Fi on a Sony Bravia TV: A Complete Guide to Connecting to the Internet

Connecting a TV Sony Bravia Wi-Fi internet connection provides access to streaming services, online cinemas and signature features like Google TV or Bravia CoreHowever, many users encounter difficulties: the network can't be found, the password isn't accepted, or the connection keeps dropping. In this article, we'll look into these issues. All methods of setting up Wi-Fi — from basic connection to solving rare errors.

Peculiarity Sony Bravia The menu interface may differ depending on the year of manufacture and series of the TV. For example, models 2022-2026 work on the platform Google TV, and older ones (before 2021) - on Android TV or a proprietary shell. We'll take these nuances into account and provide general instructions.

1. Preparing to connect: What to check before setting up Wi-Fi

Before you begin setup, make sure your router and TV are ready to connect. Often, problems aren't caused by menu errors. Bravia, but due to external factors.

First, check distance between the router and the TVIf it's longer than 10 meters or there are thick walls (especially concrete) in the way, the signal may be too weak. In this case, consider the following options:

• 📶 Use Wi-Fi repeater (signal amplifier)
• 🔌 Connect your TV to your router via Ethernet cable (if the model supports it)
• 📡 Move the router closer to the TV or use Mesh system

Secondly, make sure your router is working properly. compatible mode. Televisions Sony Bravia support standards Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) And Wi-Fi 6 (802.11ax) (on new models). If the router is configured to only 802.11a or uses rare channels (for example, 160 MHz), the TV may not see the network. Recommended mode — 802.11n/ac on frequency 2.4 GHz or 5 GHz.

⚠️ Attention: If you use guest network on the router, make sure it doesn't restrict access to local devices. Some TVs Sony require connection with other gadgets on the network to operate functions like Chromecast or DLNA.

2. Step-by-step instructions: how to connect Sony Bravia to Wi-Fi

Let's move on to the actual setup. The instructions are suitable for most models. Sony Bravia, but the menu paths may differ slightly. If your TV is running on Google TV (models from 2022), use the first option. For older versions, use the second.

Method 1: Connect to Google TV (2022-2026 models)

1. Click the button Home (home) on the remote control.
2. Go to Settings → Network & Internet → Wi-Fi.
3. Turn on Wi-Fi and select your network from the list.
4. Enter your password (case sensitive!) and click Connect.

Method 2: Connecting to Android TV or older models

1. Open the menu with the button Home or Settings.
2. Select Settings → Network settings → Network setup → Wireless connection.
3. Find your network in the list and click OK.
4. Enter the password and confirm the connection.

If the TV does not find your network, try adding it manually via Add a network (or Manual input). For this you will need:

• 🔤 Network name (SSID) — the exact name of your Wi-Fi
• 🔐 Security type - usually WPA2-PSK or WPA3-PSK
• 📡 Frequency — 2.4 GHz or 5 GHz (if the router supports both)

3. Common mistakes and their solutions

Even if you enter the password correctly, the connection may not work. Let's look at common errors and how to fix them.

A critical feature of Sony Bravia TVs from 2020-2026: they do not support WEP-encrypted networks. If your router uses this outdated standard, connection will be impossible.

⚠️ Attention: If after connecting to Wi-Fi the TV does not open applications (for example, YouTube or Netflix), check the settings DNS on the router. Some providers block access to streaming services through their DNS servers. The solution is to manually specify Google's DNS (8.8.8.8) or Cloudflare (1.1.1.1).

4. Setting up Wi-Fi Direct and Miracast on Sony Bravia

In addition to the standard connection to the router, TVs Sony Bravia support technologies Wi-Fi Direct And MiracastThey allow you to broadcast your smartphone or laptop screen without the need for a router.

Wi-Fi Direct creates a direct network between the TV and another device (for example, a smartphone) Android). This is convenient for viewing photos and videos without an internet connection. To activate:

1. Open Settings → Network & Internet → Wi-Fi Direct.
2. Turn on the feature and select Set up as an access point.
3. On your smartphone, connect to the network named DIRECT-xx-BRAVIA (the password is usually displayed on the TV screen).

Miracast (or Screen Mirroring) allows you to mirror your device's screen to your TV. To do this:

1. On TV: Settings → Devices & Accessories → Screen Mirroring.
2. On your smartphone: turn on Screen sharing (on Android) or Wireless Display (on Windows).
3. Select your TV from the list of available devices.

5. Network optimization for streaming and online gaming

If you are planning to watch movies in 4K or play cloud-gaming (For example, GeForce NOW or Xbox Cloud Gaming), a standard Wi-Fi connection may not be sufficient. Here's how to improve stability:

• 📶 Use 5 GHz - this frequency is less loaded and provides higher speed, but passes through walls worse.
• 🔄 Enable QoS on your router — Prioritize TV traffic for streaming.
• 🔌 Connect via cable - if the model supports Ethernet, this is the most stable option for 4K HDR.
• 🛡️ Disable Wi-Fi power saving in the TV settings (path: Settings → System → Power Saving → Wi-Fi Mode).

To check the connection speed on your TV:

1. Open Settings → Network & Internet → Network Status.
2. Click Speed ​​test (or Network test on older models).
3. For stability 4K-streaming speed should be no less than 25 Mbps.

⚠️ Attention: If you use VPN on a router, some streaming services (for example, Netflix or Disney+) may block content due to geolocation. The solution is to disable the VPN for the TV through the router settings (usually called Policy Routing or VPN Bypass).

6. Reset network settings and update firmware

If none of these methods help, there may be a problem with the TV's software. In this case, resetting the network settings or updating the firmware will help.

Network reset:

1. Go to Settings → System → Reset.
2. Select Reset network settings (do not confuse with a full reset!).
3. Confirm the action and try connecting to Wi-Fi again.

Firmware update:

• 🔄 Automatically: Settings → Support → Software Update → Network.
• 💾 Manually: Download the firmware from official Sony website (specify the exact model!) and install via USB.

What should I do if Wi-Fi stops working after an update?

If your TV stops detecting networks after a firmware update, try rolling back to the previous software version. To do this, download the old firmware from the Sony website and install it via USB. In some cases, a full factory reset helps (but this will delete all your data, including installed apps).

7. Alternative ways to connect to the Internet

If Wi-Fi still doesn't work, consider these alternatives:

• 🔌 Cable connection (Ethernet): The most stable method, but requires cable routing. Suitable for models with a port. LAN.
• 📱 USB modem: Some TVs Sony Bravia support connection via USB 4G/5G modemCheck compatibility on the manufacturer's website.
• 🔄 Powerline adapters: They transmit the internet signal through electrical wiring. This is useful if the router is far away and cables are not available.

To connect via Ethernet:

1. Connect the TV and the router with a cable LAN.
2. Go to Settings → Network & Internet → Active Network.
3. Select Setting up the connection and follow the instructions.

If you use mobile Internet (via smartphone in hotspot mode), please note that:

• Some operators block streaming services when distributing internet.
• The speed may not be sufficient for 4K-video.
• Traffic consumption will be high (up to 7 GB/hour For 4K HDR).

FAQ: Frequently asked questions about setting up Wi-Fi on Sony Bravia

My TV connects to Wi-Fi but won't open apps. What should I do?

The problem may be in DNS servers or provider restrictions. Try:

1. Change DNS on router to 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare).
2. Disable Parental Control in the TV settings.
3. Check if your router's antivirus software is blocking access to streaming services.

Is it possible to connect Sony Bravia to a hidden Wi-Fi network?

Yes, but you will have to enter the data manually:

1. In the Wi-Fi menu, select Add a network.
2. Enter SSID (hidden network name), security type and password.
3. Make sure your router allows you to connect to a hidden network (sometimes this is disabled for security reasons).

Why does my TV keep disconnecting from Wi-Fi?

The reasons may be different:

• 🔋 Energy saving: Turn off the mode Saving Wi-Fi energy in the settings.
• 📶 Weak signal: Check the signal level in Network status - if below 50%, use a repeater.
• 🔄 IP conflict: Assign a static IP to your TV in your router settings.

How do I find out my TV's MAC address to connect it to a router?

You'll need a MAC address if MAC filtering is enabled on your router. To find it:

1. Go to Settings → Network & Internet → Network Status.
2. Scroll down to the section MAC address (Wi-Fi).
3. Copy the address and add it to the list of allowed devices on the router.

Does my Sony Bravia support Wi-Fi 6 (802.11ax)?

Technology Wi-Fi 6 available only on models Sony Bravia 2020 and newer (series X900H, X950H, A8H and above). To check:

1. Open Settings → Network & Internet → Wi-Fi.
2. If there is a mark in the list of available networks Wi-Fi 6 or 802.11ax, your TV supports this standard.

For maximum speed, use a router with Wi-Fi 6 and connect to the network at the frequency 5 GHz.