Modern multimedia centers, such as brand TVs Asano, require a constant internet connection to function properly. Without internet access, it's impossible to update software, launch streaming services like YouTube, or use the Smart Hub feature. The wireless module activation process in these devices is based on the operating system. Android TV, which makes the procedure standardized, but has its own nuances.
Owners often encounter situations where the automatic network search fails or the connection drops immediately after entering the password. This may be due to outdated router settings, frequency conflicts, or malfunctions in the signal reception module itself. Following the correct sequence of steps will help avoid time-consuming menu searches for a solution.
In this article, we'll cover every step of the connection process, from checking your equipment to manually configuring IP addresses. You'll learn how to avoid common errors and ensure stable data transfer for watching high-definition videos. Getting up and running will only take a few minutes with a working router.
Preparatory stage and equipment testing
Before you begin setup, make sure your router is working properly and is transmitting a signal. TV Asano may not see the network if the router is hidden SSID (network name) or filtering is enabled MAC addressesIt's also worth checking if the internet works on other devices to rule out issues with your provider.
Pay attention to the location of your equipment. If the router is located behind thick walls or in a metal cabinet, the signal may be too weak for reliable reception by the TV. In such cases, it is recommended to use Wi-Fi repeaters or switch to a wired connection.
⚠️ Attention: Some router models have dual-band (2.4 GHz and 5 GHz). Older Wi-Fi modules in TVs may not support the 5 GHz frequency, so make sure the 2.4 GHz network is enabled.
If you're using complex passwords with special characters, try temporarily simplifying them to test the connection. Sometimes Android TV drivers don't correctly process certain characters in security keys. WPA2/WPA3.
Step-by-step instructions for connecting via the menu
To get started, turn on your TV and wait for the main screen to load. You'll need a remote control. Navigate the menu using the arrow keys. First, access the device's system settings.
Click the button Settings (gear) on the remote control or select the corresponding icon in the upper right corner of the interface. In the list that opens, find the section responsible for network connections. It may have different names in different firmware versions, but it's usually Network and Internet.
- 📡 Select an item Wi-Fi or
Wireless networksin the list of available interfaces. - 🔍 Wait until the airwaves scan is complete and a list of available access points appears.
- 🔑 Click on the name of your home network from the list provided.
- 📝 Enter the password using the on-screen keyboard and confirm the action with the button
OKorConnect.
After entering the data, the TV will attempt to obtain an IP address automatically. If successful, a status will appear next to the network name. Connected, and a corresponding icon may appear in the corner of the screen. You can now launch applications.
☑️ Connection check
Manual configuration of IP and DNS addresses
In situations where automatic retrieval of settings (DHCP) fails, requiring manual configuration. This often happens due to unstable router operation or specific provider settings. You'll need to know the exact parameters of your local network.
In the network selection menu, instead of quick connection, select the item Additionally or Advanced settingsHere you need to change the IP address type from Automatically on Static (Static). This will allow you to enter addresses manually.
| Parameter | Description | Example of meaning |
|---|---|---|
| IP address | Unique address of the TV on the network | 192.168.1.55 |
| Gateway | Your router's address | 192.168.1.1 |
| Network mask | Determines the size of the local network | 255.255.255.0 |
| DNS 1 | Primary name server | 8.8.8.8 |
Pay special attention to DNS fields. Providers sometimes block access to services or process requests slowly. Using Google's public DNS (8.8.8.8) or Cloudflare (1.1.1.1) often speeds up the response of the Smart TV interface.
⚠️ Attention: Make sure that the IP address you enter is in the same subnet as the router, but does not match the addresses of other devices, otherwise an address conflict will occur.
After entering all the information, save the settings. The TV will reconnect with the new settings. If the status changes to "Connected," the issue is resolved.
What to do if the keyboard does not work?
If the on-screen keyboard is frozen or unresponsive, try connecting a regular USB computer mouse to the TV's port. This will allow you to quickly enter passwords and navigation commands.
Using WPS for a quick connection
Method WPS (Wi-Fi Protected Setup) allows you to connect devices without entering a password. This is convenient if the remote control has faulty buttons or the password is too complex. However, this feature must be supported by both the router and the TV. Asano.
In the Wi-Fi settings menu on your TV, find the button WPS or Push ButtonAfter pressing it, you'll have about two minutes to activate the mode on the router. Press the physical WPS button on the router body.
- 🔘 Click
WPSin the TV menu Asano. - 📶 Immediately press the WPS button on the router (the indicator usually lights up).
- ⏳ Please wait for the encryption key exchange to complete.
- ✅ If the connection is successful, the TV will automatically connect to the network.
It's worth noting that modern security standards are gradually abandoning WPS due to vulnerabilities. If your router is new, this feature may be disabled by default in its web interface.
Solving typical problems and errors
Despite the simplicity of the procedure, users often encounter errors. The most common is "Unable to connect" or the IP address being obtained indefinitely. Often, the cause is an incorrect date and time on the TV, which causes a security certificate conflict.
Check the date settings in the section General -> Date and timeSet up automatic synchronization via the network or set the correct values manually. SSL protocols won't work without the correct time.
Another common issue is a full network service cache. In this case, a complete reset of network settings helps. Go to Settings -> Net and select Reset network settingsThis will delete all saved passwords and return the network module to its original state.
⚠️ Attention: The Android TV interface may be updated by the manufacturer. The layout of menu items may differ slightly from that described in the manual, so look for synonyms (Network, Connections, Wireless).
If all else fails, try updating your TV's software via a USB drive by downloading the firmware from the official website. Older software versions may contain bugs that interfere with the Wi-Fi module's operation.
Alternative ways to access the Internet
If the built-in Wi-Fi module is faulty or unstable, there are workarounds. The most reliable is to use a LAN cable. Simply connect the port. LAN on the router and port Ethernet on the TV with a cable. The setup usually happens automatically.
You can also use your smartphone as a hotspot, although this uses up your mobile data. Enable tethering on your phone and connect your TV to the created network as if it were a regular Wi-Fi hotspot. This is a good way to determine whether the issue is with the TV or your home router.
For models without built-in Wi-Fi (Smart Ready only), external USB adapters are available. It's important to purchase adapters that are compatible with your TV's chipset. Asano, since universal whistles may not work without drivers.
Why does the TV see the network but not connect?
This is most often due to the incorrect encryption type on your router. Try changing your router's security settings from WPA3 to WPA2-PSK (AES). Also, check if there's a limit on the number of connected devices in the router's admin panel.
Is it possible to share Wi-Fi from an Asano TV?
No, Asano TVs, like most Smart TVs, only operate in client (receiver) mode. Access point (internet sharing) functionality is not included in their software.
How to find out the MAC address of the TV for filtering?
The MAC address can be found in the menu: Settings -> About TV -> Status or NetThere will be a Wired MAC (for cable) and a Wireless MAC (for Wi-Fi) listed. The Wireless MAC is required for filtering.