Smartphones of the line Redmi from the company Xiaomi deservedly enjoy popularity due to their excellent price-quality ratio. However, despite the advanced shell MIUI or a new one HyperOSUsers often experience difficulties with basic functions, such as connecting to a wireless network. This may be due to interface issues, software glitches, or specific provider requirements.
In this article, we'll cover the internet connection setup process in detail, from standard module activation to detailed manual configuration. You'll learn how to fix common errors, improve signal stability, and protect your data from leaks. Understanding these processes will allow you to feel confident using any internet-based device. Android.
We won't use complex technical terms without explanation, but we will highlight important nuances that are often overlooked in standard manuals. Proper setup is the key to fast application performance and comfortable viewing of high-definition content.
Basic activation of the wireless module
The first step is always to physically turn on the radio module. In smartphones Xiaomi There are two main ways to do this, each with its own advantages depending on the situation. The quickest method is to use the notification shade, which is accessible from any screen.
To do this, swipe down from the top of the display. In the menu that opens, look for an icon shaped like a fan or the letter "W." Tapping it will activate a search for available networks. If the icon is highlighted blue or green, the module is working. Long press Clicking on this icon will take you directly to advanced settings.
An alternative is to use the main system settings menu. This is where all device settings are located. Find the section responsible for connections and ensure the slider is enabled. Sometimes, after a system update, settings can reset, so checking this item is essential.
- 📱 Swipe down from the top to open the Control Center.
- 🔌 Find the Wi-Fi icon and tap it to turn it on.
- ⚙️ For detailed settings, hold the icon or go to the "Settings" menu.
It's important to note that the interface may differ slightly in some regions or firmware versions. If you can't find the switch you need, use the search bar at the top of the settings menu and search for "Wi-Fi."
Finding and connecting to your home network
Once the module is activated, the phone begins scanning the air. A list of available access points will appear on the screen. SSID (Network name) is the identifier you set in your router. If you're connecting for the first time, find your name in the list.
Click on the network name. The system will prompt you for a password. Be careful: the password is case-sensitive. Even a single character error will result in access being denied. To easily view your typed text, use the "Show Password" feature, usually visible in the input field.
There is also a function QR code, which significantly simplifies the process for guests or new devices. If you already have a phone connected to this network, you can scan the code from its screen. This eliminates the risk of typos when entering a complex security key.
⚠️ Attention: Never connect to open networks with suspicious names in public places without using a VPN. Scammers often create hotspots with names like "Free_WiFi" or "Cafe_Internet" to steal personal information.
After successful authorization, the "Connected" status will appear under the network name. The phone will remember this access point and will attempt to connect to it automatically when within range. This is standard operating system behavior. Android.
☑️ Connection check
Advanced settings and manual input of parameters
In most cases, automatic settings are sufficient, but sometimes manual intervention is required. This is especially true for corporate networks, hidden access points, or connection stability issues. To access the advanced settings menu, click the arrow to the right of the network name in the list of available or connected networks.
You can change the settings here IP. The default protocol is DHCP, which automatically assigns an address to the device. If the router is configured to assign addresses statically, you must select "Static" and manually enter the IP address, gateway, and DNS servers.
Example of static settings:IP address: 192.168.1.105
Gateway: 192.168.1.1
Network prefix length: 24
DNS 1: 8.8.8.8
DNS 2: 8.8.4.4
Also available in this menu is the "Privacy" feature. You can choose whether the phone will use the real MAC address devices or generate a random one for each network. Using a random address improves anonymity, but can cause problems if the router has a MAC address filter.
- 🔒 Security type: usually WPA2/WPA3 Personal.
- 🌐 Proxy server: leave "None" unless you use specific settings.
- 🆔 MAC Address: Select "Use the device's MAC address" to filter.
Changing these settings requires caution. An incorrectly specified gateway will result in no internet access, even if the router is connected. If you're unsure of the settings, it's best to revert to automatic settings.
Why change DNS?
Changing DNS servers to Google (8.8.8.8) or Cloudflare (1.1.1.1) can speed up website loading and bypass some ISP blocking if your router is not configured to use them.
Setting up the 2.4 GHz and 5 GHz frequency range
Modern routers often operate in two ranges: 2.4 GHz And 5 GHzUnderstanding the difference between them is critical for comfortable smartphone use. The 2.4 GHz band provides greater coverage, but is slower and susceptible to interference from microwave ovens and neighboring networks.
The 5 GHz band offers significantly higher data rates and less noise, but has a shorter range and is less effective at penetrating walls. Smartphones Redmi support both standards, but can sometimes “cling” to the weaker 2.4 GHz signal, ignoring the fast 5 GHz.
In the Wi-Fi assistant settings, you can find an option to prefer networks. However, if the router broadcasts networks with the same name (SSID) for both bands, the phone automatically decides which one to connect to. To force a connection to the 5 GHz band, you can temporarily disable 2.4 GHz in the router or separate the network names.
| Parameter | 2.4 GHz | 5 GHz |
|---|---|---|
| Speed | Up to 150-300 Mbps | Up to 800+ Mbps |
| Range | High | Medium/Low |
| Penetration ability | Good | Bad |
| Interference level | High | Short |
For gaming and 4K video viewing, 5 GHz is recommended when in the same room as the router. For smart home use and simple tasks in distant rooms, 2.4 GHz is better.
Solving common connection problems
Even with proper configuration, errors can still occur. The most common error is "Obtaining IP address..." followed by failure. This means the phone sees the router but can't obtain a digital network address from it. A simple reboot of the router often resolves the issue: turn off Wi-Fi, wait 5 seconds, and turn it back on.
If the problem persists, try "Forgetting the Network." Click on the network name, select "Delete" or "Forget," and then reconnect by entering the password. This will clear old, possibly conflicting, configurations. It's also worth checking to see if the list of connected devices on your router is full.
In rare cases, the culprit is an antivirus or VPN app blocking the connection. Try temporarily disabling them. Also, make sure the date and time are set correctly on your phone—desyncing can block the secure connection.
⚠️ Attention: If none of these methods help, reset your network settings. This won't delete your photos or contacts, but it will return all network settings (Wi-Fi, Bluetooth, and mobile data) to factory defaults.
To reset, go to Settings → Connection and sharing → Reset Wi-Fi, mobile networks, and BluetoothAfter this procedure, the phone will be as good as new in terms of network settings, and all saved passwords will have to be re-entered.
Optimizing Wi-Fi performance on Xiaomi
shell MIUI And HyperOS It has an aggressive power-saving system that can disable Wi-Fi in the background to conserve battery life. If you stop receiving notifications or downloads are interrupted when the screen is off, you may need to adjust your battery settings.
Find your browser or messenger in the list of apps, tap "Power Saving," and select "No Restrictions." This will prevent the system from terminating the app. Also in the Wi-Fi settings, there's a "Wi-Fi Assistant" feature that switches to mobile data if the signal is weak. You can disable it if you prefer to keep Wi-Fi on.
Clearing the network services cache regularly is also helpful. Go to Settings → Apps → All apps → Show system processes, find "Wi-Fi" or "Google Play Services" and clear the cache. This may resolve software errors.
- 🔋 Disable power saving for important apps.
- 📡 Adjust the sensitivity of the Wi-Fi assistant.
- 🧹 Clear the system service cache periodically.
By following these recommendations, you will ensure the stable operation of your Xiaomi Redmi on wireless networks. Please note that the software is constantly being updated, and the location of some menu items may change.
Why doesn't my phone see 5GHz Wi-Fi?
Your router may be configured for channels that aren't supported in your region (for example, some channels are blocked in Russia and the EU). Try changing the region in your router settings or selecting channels 36-64.
How to find the MAC address on a Xiaomi?
Go to Settings → About phone → General informationThe Wi-Fi MAC address will be listed there. You can also find it in the advanced settings of a specific Wi-Fi network.
Is it safe to use Wi-Fi Share?
Yes, when you share your password via QR code or MI Share, your data is encrypted. However, don't share the QR code screen with strangers, as anyone can scan it and access your network.
What to do if Wi-Fi keeps disconnecting?
Check that "Disable Wi-Fi in sleep mode" is unchecked in the advanced settings. Also, try changing the router's frequency channel to avoid interference with your neighbors.