Setting up Wi-Fi on the HP DeskJet 2710 Printer: 4 Proven Methods + Troubleshooting

Printer HP DeskJet 2710 — a compact and functional device for printing, scanning, and copying, but its capabilities are only fully realized when connected to a wireless network. Without proper Wi-Fi setup, you won't be able to print wirelessly from your phone, tablet, or laptop, or use cloud services. HP ePrint or AirPrintIn this article, we'll cover all the current methods for connecting a printer to a network, from the standard method via the control panel to alternative options using HP Smart And WPS.

Feature of the model DeskJet 2710 Without a screen, all operations are performed using indicator lights and buttons, which can be confusing for beginners. We'll cover every step in detail, including preparing the router, choosing the optimal connection method, and diagnosing common errors. If your printer has been used before or previously connected to a different network, don't skip the section on resetting network settings—this will resolve most issues.

Important: The setup procedure may vary slightly depending on your printer firmware version and router model. If your router supports the frequency 5 GHz, temporarily disable it - DeskJet 2710 works only in the range 2.4 GHz.

📊 How do you usually connect your printer to the network?
Via USB cable
Via Wi-Fi from the printer's control panel
Via the HP Smart app
I use WPS
Another way

1. Preparing to set up Wi-Fi: What to check before you start

Before you begin connecting, make sure all system components are ready for operation. Skipping this step often leads to errors such as "Pritter not found online" or "Unable to connect to access point"Here's a checklist of mandatory conditions:

  • 🔌 The printer is turned on and plugged into a power outlet. The power indicator should be green or blue (depending on your regional version).
  • 📶 The router is working stably.. Reboot it 5 minutes before setup (turn off the power for 30 seconds).
  • 📱 Tuning device (laptop, smartphone) is connected to the same Wi-Fi network to which you will connect the printer.
  • 🔄 Reset old settingsIf the printer was previously connected to a different network, perform a reset (instructions in section 5).
  • 📄 Documentation at hand. Write down the network name (SSID) and the Wi-Fi password - you will need them in several steps.

Pay special attention router settings. HP DeskJet 2710 does not support:

  • 🚫 Networks with hidden SSID (disable this option in the router admin panel).
  • 🚫 Encryption WEP or TKIP - use only WPA2-PSK (AES).
  • 🚫 Wi-Fi channels are higher 11 (manually set the channel from 1 to 11 in the router settings).
⚠️ Attention: If your router uses dual band (2.4 + 5 GHz) with a common network name (SSID), temporarily separate the networks. In the router's admin panel, find the setting "Lane Separation" or "2.4G/5G Separation" and assign to the network 2.4 GHz unique name (eg MyWiFi_2G).

Check the encryption type (must be WPA2-PSK)

Set channel from 1 to 11

Disable SSID hiding

Separate 2.4 and 5 GHz networks (if applicable)

Reboot your router-->

2. Method 1: Connecting via the printer control panel (without USB)

This is the main method recommended HP for the model DeskJet 2710It doesn't require any additional devices, but it does require some attention—all actions are performed using buttons and indicator lights on the printer body.

Algorithm of actions:

  1. Activate Wi-Fi setup mode:
    • Make sure the printer is turned on and in standby mode (only the power and Wi-Fi lights are on).
    • Press and hold the button Wi-Fi (with antenna icon) within 5 seconds, until the indicator starts flashing.
  2. Select your network:
    • The Wi-Fi indicator will flash blue - this means that the printer is searching for available networks.
    • Click the button Cancel (red cross) to start searching again if the indicator flashes for too long (more than 2 minutes).
    • When the printer finds your network, the indicator light will flash. green. Click the button Wi-Fi once to confirm your choice.
  • Enter your password:
    • The indicator will start flashing. orange - this is a signal to enter a password.
    • Use the buttons Up/Down Arrow on the printer panel to select the password characters (letters and numbers are displayed alternately).
    • To confirm the symbol selection, press OK, to move to the next one - Right arrow.

    If the password is entered correctly, the Wi-Fi indicator will light up. blue (connection successful) or green (depending on the firmware version). The entire process takes 3 to 7 minutes. If the indicator continues to flash orange or red, check the password or repeat the process.

    3. Method 2: Connecting via WPS (the fastest method)

    Technology WPS (Wi-Fi Protected Setup) allows you to connect your printer to the network without entering a password—just press a button on the router. This method only works if:

    • 🔄 Does your router support WPS (usually there is a button with the inscription WPS or the two arrows icon).
    • 🔒 In the router settings WPS enabled (check in the admin panel).
    • ⏳ Connection time is limited 2 minutes after activating the mode.

    Step-by-step instructions:

    1. Activate the mode WPS on the printer:
      • Press and hold the button Wi-Fi on the printer within 3 secondsuntil the indicator starts flashing blue.
      • Then press the button Cancel (red cross) once - the indicator should flash orange (mode WPS activated).
    2. Activate WPS on the router:
      • For 2 minutes press the button WPS on the router (usually it is located on the back panel).
      • If there is no button, go to the router admin panel (usually at the address 192.168.0.1 or 192.168.1.1) and activate it manually WPS in the section Wi-Fi.
  • Wait for connection:
    • The Wi-Fi light on the printer should stop blinking and turn on. blue (success) or green.
    • If the indicator flashes red, repeat the procedure or use another method.
    ⚠️ Attention: Some routers (eg. TP-Link Archer C6 or ASUS RT-AC66U) require holding down the button WPS Please allow 5-10 seconds for activation. If the connection fails, check your router's documentation.
    Scenario Cause Solution
    The indicator flashes orange for > 2 minutes The router does not support WPS or the function is disabled. Check your router settings or use another method
    The indicator is flashing red Authentication error (incorrect password or encryption type) Change the encryption type to WPA2-PSK in the router
    The indicator turns off after pressing WPS Connection timed out (more than 2 minutes) Repeat the procedure from the beginning
    The indicator is blue, but the printer is not visible on the network. IP address not received (DHCP disabled) Turn on DHCP in the router settings or assign a static IP

    4. Method 3: Connecting via the HP Smart app (for smartphones)

    Application HP Smart (available for Android And iOS) simplifies Wi-Fi setup, especially if you're using a smartphone or tablet. It automatically finds the printer and offers step-by-step instructions. However, this method requires temporarily connecting the printer to your phone via Wi-Fi Direct.

    Instructions:

    1. Install the application HP Smart:
      • Download it from App Store or Google Play.
      • Register an account HP (You can skip it, but some functions will be limited).
    2. Connect your phone to the printer via Wi-Fi Direct:
      • On the printer, press and hold the button Wi-Fi And Information (icon i) simultaneously during 5 seconds.
      • The Wi-Fi indicator will start blinking. blue - this means that the mode is on Wi-Fi Direct.
      • On your phone, go to Wi-Fi settings and connect to the network named DIRECT-xx-HP DeskJet 2710 (no password required).
  • Set up a connection to your network:
    • Open the app HP Smart - it will automatically find the printer.
    • Select an option "Printer Setup" → Wireless Network.
    • Follow the on-screen instructions: select your Wi-Fi network and enter the password.

    After successful setup, the printer will automatically reconnect to your network, and your phone will switch back to regular Wi-Fi. If the app returns an error "Unable to connect", check:

    • 🔌 Is the printer connected to a power outlet?
    • 📶 Is the phone in the network coverage area? Wi-Fi Direct (no further than 2 meters from the printer).
    • 🔄 Are you trying to connect to the network? 5 GHz (the app may automatically select the wrong frequency).
    What should I do if HP Smart doesn't find my printer?

    1. Make sure that the printer is in the active mode. Wi-Fi Direct (flashing blue indicator).

    2. Temporarily disable mobile internet (4G/5G) in your phone settings – it may interfere with the connection.

    3. Restart the application HP Smart and try your search again.

    4. If used Android, check the app permissions (location and Wi-Fi access must be enabled).

    5. On some phones (eg. Xiaomi or Huawei) you need to manually enable the option Auto-connect to open networks in the Wi-Fi settings.

    5. Method 4: Connecting via USB cable (alternative method)

    If the previous methods did not work, you can set up Wi-Fi by temporarily connecting the printer to the computer via USBThis method requires installing drivers. HP, but fits all versions Windows And macOS.

    Step-by-step instructions:

    1. Connect the printer to your computer:
      • Use the original USB cable (included in the kit).
      • Turn on the printer - the computer should automatically begin installing the drivers.
    2. Install the software HP:
      • Download drivers from official HP website (select model DeskJet 2710).
      • Run the setup file and follow the instructions. When you select the connection type, select Wireless Network.
  • Set up Wi-Fi:
    • The program will prompt you to select a network from the list - indicate yours SSID.
    • Enter your password and wait for the setup to complete.
    • After successful connection, disconnect USB cable — the printer will remain on the Wi-Fi network.
      • ⚠️ Attention: If an error occurs when installing drivers "Device not recognized", try connecting the cable to another one USB port (preferably USB 2.0, they are usually black). Also check if the mode is disabled Energy Saving for USB ports in Device Manager Windows.

      6. Reset the printer's network settings (if nothing helps)

      If the printer was previously connected to a different network or setup fails, follow these steps: complete reset of network settingsThis will reset all Wi-Fi settings to factory defaults.

      Reset instructions:

      1. Turn on the printer and wait until it goes into standby mode (no indicators flashing).
      2. Press and hold the buttons Wi-Fi And Cancel (red cross) simultaneously during 10 seconds.
      3. Release the buttons when all the indicators start flashing. The printer will reboot.
      4. After rebooting (approximately 1-2 minutes), the printer will be ready for new Wi-Fi setup.

    Resetting network settings does not delete firmware or print settings—it only affects Wi-Fi and Ethernet connection settings. If the printer still does not connect after resetting, check:

    • 🔌 Is the printer powered from a wall outlet (not USB or a power bank).
    • 📡 Is the router too far away (the optimal distance is up to 5 meters).
    • 🔄 Is the connection blocked by an antivirus or firewall on your computer (if you are using the USB method).

    7. Troubleshooting: Why the printer won't connect to Wi-Fi

    Even with proper setup, errors can still occur. Below is a table of the most common problems and their solutions for HP DeskJet 2710:

    Error Possible cause Solution
    The Wi-Fi indicator is blinking orange Incorrect password or encryption type Check your password, change the encryption to WPA2-PSK (AES)
    The printer was not found on the network after connecting. IP address not assigned (DHCP disabled) Turn on DHCP in the router or assign a static IP manually
    The connection is broken after a few minutes. Saving energy on your router or printer Turn it off Power saving mode in the router settings
    The HP Smart app is throwing an error. "Pritter offline" The printer is connected to another network. Please reset your network settings (section 6) and try setting up again.
    The Wi-Fi indicator does not respond to pressing Firmware freeze or hardware failure Turn off the printer for 1 minute, then turn it on again. If that doesn't help, update the firmware.

    If none of the methods worked, check:

    • 🔧 Firmware update: on official HP website There may be a new firmware version that fixes connection errors.
    • 📡 Signal interferenceOther devices (microwaves, cordless phones) may be causing interference. Try connecting in a different location.
    • 🔄 Alternative router: If possible, try connecting the printer to a different router (for example, from your phone in hotspot mode).
      • ⚠️ Attention: If your printer was previously working properly but has stopped connecting to Wi-Fi, check to see if your router settings have changed (for example, the password or encryption type). Also, some providers automatically update your router firmware, which can reset the settings.

      FAQ: Frequently asked questions about setting up Wi-Fi on the HP DeskJet 2710

      Is it possible to connect a printer to Wi-Fi without a computer?

      Yes, there are three ways to do this:

      1. Via the printer control panel (section 2).
      2. Through WPS (section 3).
      3. Via the app HP Smart on a smartphone (section 4).

      A computer is only needed for the method with USB cable (section 5).

      The printer is connected to Wi-Fi, but it won't print from my phone. What should I do?

      Please check the following points:

      • Is the application installed? HP Smart on the phone and whether the printer is linked to it.
      • Is the mode enabled in the printer settings? AirPrint (For iPhone) or Mopria (For Android).
      • Is the phone on the same Wi-Fi network as the printer?
      • Is your phone's firewall or VPN blocking printing?

      If the problem persists, restart your printer and phone.

      How to find the printer's IP address after connecting to Wi-Fi?

      There are three ways:

      1. Type network configuration report:
        • Press and hold the button Information (icon i) during 5 seconds.
        • The printer will print out a sheet of data, including IP address.
      2. Via the router admin panel:
        • Go to your router settings (usually 192.168.0.1 or 192.168.1.1).
        • Find the section DHCP or Connected devices — there will be IP printer.
    • Via the app HP Smart:
      • Open the application, select your printer.
      • Go to Settings → Net → Additional information.
      • Can a printer be connected to multiple Wi-Fi networks?

      HP DeskJet 2710 remembers only one Wi-Fi network. If you need to switch between networks (for example, at home and at the office), you will have to set it up again each time or use Wi-Fi Direct for temporary connection.

      An alternative option is to use USB connection or Ethernet adapter (if the printer supports it).

      How to update printer firmware to fix Wi-Fi errors?

      Updating the firmware can resolve connection issues. There are two ways to do this:

      1. Via the app HP Smart:
        • Open the app and select your printer.
        • Go to Settings → Firmware update.
        • Follow the instructions on the screen.
    • Manually from the official website:
      • Download the latest firmware for DeskJet 2710 from the website HP.
      • Connect the printer to the computer via USB.
      • Run the firmware file and wait for the update to complete.

      ⚠️ Do not turn off the printer during the update, as this may damage it.

    • 📖 Read also

    How to connect an Epson L366 printer to Wi-Fi via a computer Step-by-step instructions: connecting the Epson L366 to a wireless network via a PC. Driver setup, WPS, Connecting a Laptop to a Brother DCP via WiFi: Instructions Step-by-step setup of your Brother DCP printer via WiFi. Solve driver and network issues. Full instructions. Connecting the HP Smart Tank 515 to Wi-Fi: A Step-by-Step Guide (2026) How to set up wireless printing on the HP Smart Tank 515 printer via Wi-Fi: a detailed guide with photos, How to find the Wi-Fi password on a Canon G3411 printer: reset and setup Learn how to recover your Canon G3411 printer's Wi-Fi password. Complete network reset instructions. How to connect the Brother DCP-1623WR printer to your phone via Wi-Fi Detailed instructions for setting up printing from a phone to a Brother DCP-1623WR via Wi-Fi Direct and a router How to connect a laptop to a printer via Wi-Fi: a complete guide A detailed guide on connecting a laptop to a printer via Wi-Fi. Setting up Windows, drivers, and