Modern multifunctional devices of the series Pixma G significantly simplify work with documents, allowing you to forget about tangled wires. Canon G3010 Connecting to your home network allows you to print from any mobile device or computer without being physically connected to a cable. This is especially convenient when the device is located away from your workstation.
The configuration process may seem complicated due to the lack of a full-fledged display on the case, but all actions are performed through intuitive button combinations. Wireless connection Provides stable data transfer and allows you to use cloud services. In this guide, we'll cover all current connection methods, including using a smartphone.
Before you begin, make sure your router is working properly and distributing internet. You'll also need to know your network name (SSID) and its password. If you're using a guest network or corporate access with web page authentication, the standard scheme may not work.
⚠️ Important: Make sure your router has a 2.4 GHz signal. Many budget printer models, including G3010, do not support the 5 GHz frequency, so the device simply will not see the network.
Preparing the device and checking the settings
The first step is to properly prepare the MFP itself for wireless operation. Resetting the network settings is necessary if the device was previously used in a different location or with a different router. This will prevent IP address conflicts.
To reset network settings, click the button Wireless on the control panel. Hold it until the power indicator flashes once. Then press the button Black (black and white copy) or Color (color copy). Next, click Wireless again, and then the copy button again.
Now make sure that the cartridges are installed and the ink is filled into the CISS system. Initialization The device takes some time to prepare, and you shouldn't interrupt power supply during this time. Only after preparation is complete should you proceed to choosing a connection method.
- 📶 Check if the Wi-Fi indicator on the panel is on (it should be blinking).
- 🔌 Make sure the USB cable is disconnected from the computer.
- 📱 Charge your smartphone if you plan to configure it via the app.
Using WPS technology for fast connection
The easiest way to set up Wi-Fi on a printer Canon G3010, is the use of technology WPS (Wi-Fi Protected Setup). This method automatically transfers the network password, eliminating the need to manually enter it through complex menus. It works if your router supports this feature.
Click the button Wireless on the MFP panel and hold it until the power indicator flashes. Then press the button Black or ColorAfter that, find the WPS button on your router. It may be physical or software-based (in the web interface).
Press WPS on the router -> Press Wireless on the printer -> Wait 2 minutesThe wireless indicator on the printer will start blinking and then turn solid blue. This means that conjugation The connection was successful. If the indicator continues to flash or turns orange, the connection was not established and you should try again.
Manual wireless connection setup
If automatic mode doesn't work, you'll have to use the manual method. You'll need a Windows or macOS computer temporarily connected to the printer via USB, or you can use a smartphone. We'll consider the PC option, as it's often more stable for initial setup.
Insert the installation disk with drivers or download the full software package from the official website CanonRun the setup file and follow the on-screen instructions. When prompted to select a connection type, select Wireless LAN.
During installation, the program will detect the device connected via USB and prompt you to reconfigure it to Wi-Fi. Select your network from the list and enter the password. Once the settings are successfully transferred, the program will prompt you to disconnect the USB cable.
| Indicator | State | Meaning |
|---|---|---|
| Blue (flashing) | Network search | Waiting for connection |
| Blue (on) | Connected | Ready to print |
| Orange | Error | Incorrect password or signal |
| It doesn't burn. | Turned off | The Wi-Fi module is not active |
⚠️ Note: When setting up manually, make sure that CapsLock is not enabled on your keyboard, as the Wi-Fi password is case-sensitive.
Setup via the Canon PRINT mobile app
Smartphone owners can do this without a computer. To do this, they need an app. Canon PRINT Inkjet/SELPHY, available for iOS and Android, is a modern and convenient way to start printing photos from your phone right away.
Launch the app and add a new device. Select your printer. G3010 from the list of available ones. The app will offer to transfer Wi-Fi settings from your smartphone to the printer. To do this, your phone must be connected to the same network to which you want to connect the MFP.
☑️ Check before connection
Follow the instructions on your smartphone screen. At a certain point, the app will ask you to press a button. Direct on the printer or press a key combination to enter direct communication mode. After data exchange, the device will appear in the list of available devices for printing.
If automatic transfer doesn't occur, select the "Connect Manually" option in the app. You'll be prompted to enter the Wi-Fi network password directly in the interface. Canon PRINTThis is a reliable method if standard detection protocols fail.
Direct Connect mode
A unique feature of the series Pixma is the ability to work in the mode Direct ConnectIn this case, the printer itself becomes an access point, creating its own Wi-Fi network. The computer or phone connects directly to the printer, bypassing the router.
To activate, click the button Direct on the control panel. A name like this will appear in the list of Wi-Fi networks on the smartphone screen. Canon_ij_G3010Connect to this network using the password, which can be found by clicking the button Network and the information button (if available) or by printing a configuration report.
This mode is ideal for situations when the router is unavailable or you're visiting someone. However, it's important to remember that in this mode Internet access from the connected device may be limited because the channel is busy transmitting print data.
How do I find out the password for Direct mode?
Print a network settings report. To do this, press the "Network" button (or the key combination specified in the instructions for your firmware version), and the default SSID and password will be printed on the sheet.
Diagnosing problems and printing a report
If you set up Wi-Fi on the printer Canon G3010 If this still doesn't work, diagnostics are needed. The most informative tool is printing a LAN connection report. It contains error codes and connection status.
To print the report, click the button Network (or a combination that mimics it, often holding down the wireless button). In the report, find the section Wi-Fi StatusIf it says "Connection failed," pay attention to the error code.
- 🔍 Code 1000-1099: Problem with the printer settings.
- 📡 Code 1100-1199: Error communicating with the access point (router).
- 🔐 Code 1200-1299: Incorrect password or encryption type.
A common issue is MAC address filtering on the router. If you have strict protection, add the printer's MAC address (indicated in the report) to the router's whitelist. Also, try temporarily disabling your antivirus software's security macros on your PC during setup.
Why doesn't the printer see the 5 GHz network?
Wi-Fi module in the model G3010 Only works in the 2.4 GHz band. If your router broadcasts networks with the same name (SSID) for both frequencies, the printer may attempt to connect to the 5 GHz band and be rejected. Separate the network names in your router settings by adding the suffix "_2.4" and "_5G."
What to do if the orange indicator is on?
An orange light usually indicates an error. Try unplugging the device for 10 seconds. If that doesn't help, reset the network settings (hold the Wireless button until the power light flashes) and repeat the setup process.
Is it possible to connect a printer to a hidden network?
Yes, but only through manual configuration using a PC or a mobile app, where you can manually enter the SSID. Automatic search and WPS mode do not detect hidden networks.
Do I need a driver to print from my phone?
For basic photo and document printing via the app Canon PRINT No driver is required; everything works via the cloud or a local network. However, scanning to PDF or adjusting paper settings may require installing the full software package on your PC.