Modern smart TVs have become full-fledged multimedia centers, and without access to the global network, their functionality is significantly limited. Owners of the equipment LG Often, people need to connect their devices to their home wireless network to access streaming services, online cinemas, and interactive apps. The process isn't complicated, but it does require attention to interface details.
Connection stability directly impacts the quality of content playback, allowing you to watch 4K movies without lag or buffering. Proper network configuration It also allows access to smartphone control and voice commands for gadgets. Below, we'll cover all connection steps in detail, from basic settings to troubleshooting complex errors.
Before starting the procedure, make sure your router is turned on and broadcasting a signal, and your TV is in a strong reception area. If you just unpacked the device or reset it to factory settings, the system may prompt you to set up your internet connection immediately upon first launch, but we'll cover the manual method using the menu.
Basic wireless setup
To get started, you need to activate the network module in the system menu. On the remote control, press the gear button or the Smartto open the control panel. Depending on the operating system version webOS, the interface may differ slightly, but the logic remains the same for all models of the brand.
Go to the section All settings, then select the item Net or Connecting to the networkHere the system will prompt you to select the connection type. For wireless data transfer, select the option Wi-Fi connectionThe TV will automatically search for available networks within the antenna's range.
In the list that appears, find your router's name (SSID). If the network is hidden, you'll need to select the option to enter the name manually. After selecting the network, a virtual keyboard will open for entering the password. Be careful when entering characters, as they are case-sensitive.
- 📶 Make sure that you select your network name, especially if your neighbors have routers with similar names.
- 🔑 Use the virtual keyboard carefully, checking each letter before clicking the "Confirm" button.
- ✅ After successfully entering the password, the system should display the "Connected" status and show the IP address.
⚠️ Attention: If your password contains special characters, make sure the keyboard layout on the screen is set to Latin, otherwise authorization will fail.
After a successful connection, it is recommended to immediately check for software updates. Often, it is the latest firmware that contains fixes for network drivers, which is critical for stable operation. Go to General -> About TV -> Checking for updates.
☑️ Check before connection
Using Wi-Fi Direct
Technology Wi-Fi Direct Allows you to create a direct connection between your TV and mobile device without a router. This is especially useful if your home network is overloaded or temporarily unavailable, and you need to quickly display photos or videos from your phone on the big screen.
To activate this function, go to the TV menu Settings -> Net -> Wi-Fi DirectEnable this option, and the device's name will appear on the screen, visible to other devices. On your smartphone or tablet, select the TV's name from the list of available Wi-Fi networks. LG webOS TV.
A connection confirmation prompt may appear on the TV screen. Accept it using the remote control to allow data exchange. The transfer speed in this mode may be lower than via a router, but signal latency is minimal, making it ideal for sharing presentations or viewing family archives.
What is the difference between Miracast and Wi-Fi Direct?
Wi-Fi Direct is a technology that creates a communication channel between devices, while Miracast is a protocol for transmitting images over this channel. In other words, Wi-Fi Direct creates a "pipe," and Miracast transmits a video stream over it. Wi-Fi Direct is often required for smartphone screen mirroring to work.
Setting up a static IP address
In some cases, automatically obtaining an IP address (DHCP) can lead to unstable operation or intermittent connection drops. If your router frequently changes the TV's address, causing problems accessing media servers on your PC, it might be worthwhile to set up static IP manually.
To do this, in the network selection menu where you enter the password, find the button Additional settings or Advanced settings (usually to the right or below the input field). Uncheck the box Automatically In the IP settings section, fields for manual parameter entry will open.
You will need to enter the IP address, subnet mask, gateway, and DNS servers. The address must be in the same subnet as your router, but differ in the last digit to avoid address conflicts. For example, if your router has the address 192.168.1.1, the TV can be assigned 192.168.1.150.
| Parameter | Description | Example of meaning |
|---|---|---|
| IP address | The unique address of a device on the network | 192.168.1.150 |
| Subnet mask | Determines the size of the network | 255.255.255.0 |
| Gateway | Router address (Internet access) | 192.168.1.1 |
| DNS server | Domain Name Server | 8.8.8.8 (Google) |
Using public DNS servers such as Google (8.8.8.8) or Cloudflare (1.1.1.1), often helps speed up the Smart TV interface response and resolves app loading issues. After entering all the data, click OK or Connect to save the settings.
Dual-band networks: 2.4 GHz or 5 GHz
Modern routers often operate in two frequency ranges, and TVs LG Both are supported. However, choosing the right band can significantly impact streaming quality. Band 2.4 GHz has better penetration ability through walls, but lower speed.
Range 5 GHz It provides high data transfer speeds, which is critical for viewing 4K HDR content, but is less effective at penetrating obstacles. If the router and TV are in the same room or behind a thin partition, a 5 GHz network is preferable.
In the list of available networks, names often differ in ending, for example, MyWiFi And MyWiFi_5GWhen connecting to 5 GHz, make sure the distance to the router is short. If the signal is weak, the TV may constantly switch between bands, causing image freezing.
- 🚀 Choose 5 GHz for viewing heavy 4K content and online gaming with low latency.
- 🏠 Use 2.4 GHz if your router is located far away or behind thick concrete walls.
- 📉 Avoid proximity to microwave ovens when using 2.4 GHz, as they create interference.
⚠️ Please note: Router interfaces and TV firmware are constantly being updated. Menu item names or frequency separation methods (one network with smart switching or two separate ones) may differ from those described. Please consult your equipment documentation.
Advanced DNS settings for Smart TV
One common problem among TV owners is the inability to launch apps or slow content stores, even with a strong Wi-Fi signal. This is often due to the provider's DNS servers, which can be slow or block certain domains.
To bypass this limitation, you can manually enter the address of a reliable DNS server. Go to network settings, select your Wi-Fi network, and go to Additional settingsFind the field DNS server and switch it to manual mode.
Enter the address 8.8.8.8 (Google) or 77.88.8.8 (Yandex). This action often "revives" YouTube, Netflix, and other services if they've stopped opening. After changing the DNS, be sure to completely reboot the TV by unplugging it for 10-15 seconds.
Diagnosing and resolving connection problems
If the TV displays "No Internet connection" or "Limited" despite the correct password, diagnostics are required. In the menu Net There is usually a built-in connection test that checks the connection with the router and access to the global network.
A common cause of problems is time and date synchronization issues. If the TV's date is out of sync, security certificates won't work, and HTTPS requests will be blocked. Check this item. Time and date in the general settings and enable automatic synchronization via the network.
You can also try forgetting the network and reconnecting. Select your network in the list of networks, click the edit or delete button, and confirm "Forget network." Then search for it and enter the password again. This clears the network settings cache.
Why doesn't the TV see the 5 GHz network?
Your router may be configured to operate in a mode your TV doesn't support (for example, only channels above 100, which not all devices can see). Try changing the router's region to the US or changing the broadcast channel to 36-40 in your settings.
How to reset network settings on LG TV?
Go to All settings -> General -> Net -> Wi-Fi connectionClick the edit button (pencil) or select a network and click "Forget." To completely reset all settings, including the network, use the "General" -> "Reset to factory settings" menu.
Is it possible to connect a TV to a hidden network?
Yes, in the list of available networks, select "Add a hidden network" (usually at the bottom of the list). You'll need to enter the network name (SSID) accurately, case-sensitive, select the security type (usually WPA2-PSK), and enter the password.
What should I do if the password is accepted, but there is no internet?
Check if there's internet access on other devices. If so, the problem is with your TV settings: reset the clock, change the DNS, and check the date. There may also be a MAC address restriction in your router settings (blacklist/whitelist).