Modern users often face a situation where they need to connect a new device to their home network, but access to the router is limited or lost. Smartphone owners Honor and other devices based on Android There are several ways to recover lost login information. This is especially true when your phone is already connected to the network, but you don't remember the password for a guest device or laptop.
Depending on the operating system version MagicOS or EMUIThe procedure can vary significantly. On newer devices, the process takes literally a few seconds thanks to the built-in QR code generation feature. However, on older models or those lacking a graphical interface, you'll need to resort to more complex technical methods that require careful attention.
Before you begin any manipulations, it is important to understand that access to stored security keys is critical information. Protection system Android By default, this data is hidden from prying eyes. Therefore, to perform certain actions, you may need to verify your identity via biometrics or a screen unlock PIN.
Using a QR code on newer versions of Android
Since version Android 10Google has introduced a native Wi-Fi data sharing feature via QR code. Smartphones Honor, operating under control Magic UI 3.1 and newer versions fully support this standard. This is the simplest and most secure method, requiring no third-party software.
To access the data, you need to go to the wireless settings menu. Here, the system displays the active network and offers to share it. Clicking the appropriate button generates a graphic code that can be read by any other device with a camera.
It's important to note that on some firmware versions, the password text may be hidden behind asterisks even in this menu. In this case, only the QR code itself will be displayed on the screen. To scan it, you can use the standard Camera app on another phone or the built-in scanner in the notification shade.
- 📱 Open
Settingsand go to the sectionWi-Fi. - 🔗 Click on the name of the active network or on the gear icon next to it.
- 📷 Select an option
ShareorQR code. - 🔓 Complete identity verification (Face ID, fingerprint, or pattern).
After successful identification, a code image will appear on the screen. In most modern shells Honor The password itself is written in small print beneath this image. If the text is missing, use a second phone to scan it: after aiming the camera, the system will prompt you to connect to the network, and the required key will automatically be entered into the input field.
⚠️ Warning: Never take a photo of the QR code with the displayed password or send screenshots of it via messaging apps. Anyone with this image can instantly connect to your network without your knowledge.
Viewing through router settings
If the phone's standard interface doesn't allow you to view the saved key, the logical next step is to access the internet source—the router. This method is universal and works on all devices, including older models. Honor With Android 9 and below. All you need is a browser and access to the router's administrative panel.
To access the settings, you need to know the gateway IP address. It's usually found on a sticker on the bottom of the router and often looks like this: 192.168.0.1 or 192.168.1.1By entering this address in your browser's address bar, you will be taken to the authorization page.
Here you will need to enter your administrator login and password. If you have never changed this information, it is also indicated on the device label (often this is admin/admin). Once inside, you need to find the section responsible for the wireless network. It may be called Wireless, Wi-Fi or WLAN.
Look for the subsection within the section Wireless Security or Security settingsThis is where the field is located. WPA/WPA2 Pre-Shared Key or "Wireless Network Password." By default, the value is hidden by dots, but there's usually a "Show Password" checkbox next to it. Once enabled, you'll see the combination you're looking for.
| Router brand | Entrance address | Settings section | Encryption type |
|---|---|---|---|
| TP-Link | 192.168.0.1 | Wireless -> Wireless Security | WPA/WPA2 |
| Asus | 192.168.1.1 | Wireless Network -> General | WPA2-Personal |
| D-Link | 192.168.0.1 | Wi-Fi -> Security Settings | WPA2-PSK |
| Xiaomi | 192.168.31.1 | Wi-Fi settings | WPA2/WPA3 |
⚠️ Please note: Router interfaces are constantly being updated. If you can't find the item you need, check the official manual for your model, as the menu location may vary depending on the firmware version.
ADB Method for Advanced Users
For devices where the graphical interface does not provide for viewing passwords, and there is no access to root rights, there is a debugging method via ADB (Android Debug Bridge)This method requires a computer (Windows, macOS, or Linux) and a USB cable. It allows you to extract the system file storing your Wi-Fi configuration.
The first step is to activate developer mode on your smartphone. HonorTo do this, go to Settings -> About the phone and quickly click 7 times on the item Build numberAfter the "You are now a developer" message appears, a new "For developers" section will appear in the settings menu.
Enable "USB Debugging" in this section. Connect your phone to your computer and install the ADB drivers. On your computer, open a command prompt in the ADB-tools folder. You'll need to run a series of commands to extract the file. wpa_supplicant.conf, which stores all saved networks.
adb pull /data/misc/wifi/wpa_supplicant.conf c:/wifi.txtAfter executing the command, the file wifi.txt will appear on drive C. Open it with notepad and you will see a list of all networks in the format ssid="Network Name" And psk="Password"Please note that on modern versions Android (10+) Access to this file is closed by default even via ADB without root rights, so this method is effective mainly on older devices or custom firmware.