Forgot your home Wi-Fi password? Rostelecom, and there's no sticker on your router with connection information? Don't rush to call support or reset your router. Windows 10 There are several ways to retrieve a saved network password—even if you connected to it a year ago. In this article, we'll look at all working methods: from standard system tools to advanced utilities for network administration.
It is important to understand that these methods only work if your computer already connected (or previously connected) to the target network RostelecomIf Windows never saved this password, you'll have to restore access through the router's web interface or call your ISP. Also note: some methods require administrator rights, so prepare an account with the appropriate permissions in advance.
The instructions below are valid for all versions. Windows 10 (including the latest updates from 2026) and are compatible with most routers Rostelecom (Sagemcom, Sercomm, Huawei etc.). If you have a different provider, the procedure will remain the same, only the network name (SSID) will differ.
1. View your password through Windows Settings (the easiest way)
If your computer is currently connected to the network RostelecomThe fastest way to find out your password is through the graphical interface. Windows 10This method does not require knowledge of commands or installation of additional software.
Open the menu Start and go to Settings → Network & Internet → Status. In the block Change network settings click on Network and Sharing CenterThe classic control panel will open, where you need to click on the name of your network (for example, RT-WiFi-1234) next to the inscription Connections.
In the new window, click the button Wireless network properties, then go to the tab "Safety"**Here you will see a field Network security key — check the box Show entered characters, and the password will be displayed in readable format. Done! Now you can copy it or write it down.
⚠️ Attention: If the button Wireless network properties is inactive or missing, then your connection is configured through WPS or EAP-protocol (rarely used) Rostelecom). In this case, try other methods from the article.
- ✅ Pros: does not require administrator rights, works without the Internet.
- ❌ Cons: The password can only be seen for the current network.
- 🔧 Alternative: If the button is inactive, try the method with
command line(section 2).
2. Using the command line (universal method)
Command line (CMD) allows you to extract passwords all saved networks, not just the current one. This is useful if you were connecting to Rostelecom previously, but now you're using a different network. The method also works on Windows 11, and on older versions of the system.
Open Command line as administrator (click Win + X and select the appropriate item). Enter the command:
netsh wlan show profilesYou'll see a list of all saved networks. Find your network's name. Rostelecom (For example, RT-WiFi-XXXX) and copy it exactly, including the case. Then enter:
netsh wlan show profile name="RT-WiFi-XXXX" key=clearIn the execution results, find the section Security Settings - line Key content contains the password you are looking for. If asterisks (***), then your account does not have sufficient rights.
Run Command Prompt as Administrator|Check the network name is correct (case sensitive!)|Make sure the computer has connected to this network before|Copy the password to a safe place-->
⚠️ Attention: If the command returns an errorFailed to execute command, check if the service is enabled "WLAN Auto Configuration"** (services.msc). Also, this method does not work for networks connected via USB modem or PPPoE (for example, if the Internet is connected via a cable, and the computer itself distributes Wi-Fi).
| Way | Requires admin rights? | Shows passwords of all networks? | Does it work without connection? |
|---|---|---|---|
| Windows Settings | ❌ No | ❌ Current network only | ✅ Yes |
| Command line | ✅ Yes | ✅ All saved networks | ✅ Yes |
| WirelessKeyView | ✅ Yes | ✅ All networks + history | ✅ Yes |
| Router web interface | ❌ No | ✅ Current router password | ✅ Yes (if you have access to 192.168.1.1) |
3. Programs for viewing Wi-Fi passwords (WirelessKeyView and similar programs)
If you need to regularly work with Wi-Fi networks (for example, as an office administrator), it's more convenient to use specialized utilities. One of the most popular is WirelessKeyView from NirSoftIt's free, doesn't require installation, and shows all saved passwords in a convenient tabular form.
Download the program from NirSoft official website (avoid third-party sources to avoid viruses!) After launch (WirelessKeyView.exe) you will see a list of networks with speakers:
- Network Name (SSID) — network name;
- Key (Ascii) — password in readable form;
- Key Type — encryption type (WPA2-PSK, WEP and others).
To copy a password, right-click on the desired line and select Copy KeyThe program also allows you to export all passwords to TXT or HTML-file (useful for backup).
⚠️ Attention: Antiviruses (for example, Avast or Kaspersky) can determine WirelessKeyView How potentially unsafe software Because of its ability to extract system data. This is a false positive—the utility does not contain viruses, but use it only on trusted devices.
Alternative programs:
- 🔹 WiFi Password Revealer - simple interface, shows passwords in real time.
- 🔹 Magical Jelly Bean WiFi Password Revealer — export passwords to
CSV. - 🔹 NetPass — advanced functions for network administration.
4. How to find out the password through the Rostelecom router web interface
If none of the previous methods worked (for example, the computer has never connected to Wi-Fi), the last option is to access the router settings. To do this, you will need:
- Any device connected to the router Rostelecom (even via cable).
- Login and password for entering the web interface (usually indicated on the router sticker).
Open your browser and type in the address bar 192.168.1.1 or 192.168.0.1 (See the router sticker for the exact address). Log in using the standard credentials:
- 🔑 Login:
admin; - 🔑 Password:
adminorRostelecom(sometimes this is the serial number of the device).
After logging in, go to the section Wi-Fi (or Wireless network → Security). Here you will find:
- 📡 Network name (SSID) — the name of your Wi-Fi;
- 🔐 Password — current security key;
- 🛡️ Encryption type - usually WPA2-PSK.
What should I do if I can't access my router?
If the default password doesn't work, it's probably been changed. Try:
1. Press the button Reset on the router (hold for 10 seconds) - this will reset the settings to factory settings.
2. Call support Rostelecom (8-800-100-08-00) and request login information.
3. Check if the router is connected to the system Rostelecom ID — in this case, login is done through your personal account on the provider's website.
⚠️ Attention: After resetting the router (Reset) all personal settings (including the Wi-Fi password) will be reset to factory defaults. The new password will be indicated on the device's sticker, but you will have to reconfigure the internet connection (enter your login/password from Rostelecom, if used PPPoE).
5. Password recovery through your Rostelecom personal account
If you have access to personal account on the website Rostelecom, you can try finding the connection information there. This method is suitable if:
- 📱 You connect to the Internet via PPPoE (login/password from the provider);
- 🌐 Your router is linked to your account Rostelecom ID;
- 📋 You previously changed your Wi-Fi password through your provider's web interface.
Log in to the website lk.rt.ru and go to the section My Services → Internet. This may display:
- 📜 Contractual data — login and password for connection (PPPoE);
- 📡 Wi-Fi settings — network name and password (if the router is rented from a provider).
If you don't have the information you need, try searching for the section Router management - some models (Sagemcom 2804, Sercomm RV6699) allow you to remotely change Wi-Fi settings directly from your personal account.
⚠️ Attention: Personal account functionality varies by plan and region. In some cases, Wi-Fi data may not be displayed—this is normal. For official information, please contact support. Rostelecom.
6. What to do if none of the methods worked?
If you've tried all the methods and still can't find the password, there are some drastic measures left:
- Resetting the router to factory settings.
Click the button
Reseton the back of the router (hold for 10-15 seconds until the indicators flash). After the reset, the network name and password will return to the default ones (indicated on the sticker).⚠️ Minus: you will have to reconfigure your internet connection (PPPoE, IPTV and others).
- Contact Rostelecom support.
Call the number
8-800-100-08-00(call free) and tell us you forgot your Wi-Fi password. A specialist can: - 🔄 Reset your password remotely (if the router is linked to an account);
- 📋 Provide factory login details;
- 🔧 Send a technician to reconfigure the equipment (fee required).
If the router belongs to you (not rented from a provider), and access to its settings is lost, you can flash the device alternative firmware (OpenWRT, DD-WRT). This is a complex process that requires technical knowledge – it is best left to a specialist.
FAQ: Frequently asked questions about Rostelecom Wi-Fi passwords
🔍 Is it possible to find out the Rostelecom Wi-Fi password from a phone (Android/iPhone)?
Yes, but the methods are different:
- Android (rooted): use apps like WiFi Password Viewer.
- Android without root: look at the password in the router settings (
192.168.1.1) via browser. - iPhone: iOS doesn't allow you to view saved passwords. Use a MacBook or another computer.
🔐 What should I do if my Rostelecom router is blocked (the red light is on)?
A red light on a router usually means:
- Lack of internet connection (line problems) Rostelecom);
- Incorrect settings PPPoE (check login/password);
- Hardware failure (overheating, damaged ports).
Try:
- Reboot the router (turn it off for 30 seconds).
- Check cables and connections.
- Call support Rostelecom for diagnostics.
📱 How do I connect a new device to Rostelecom Wi-Fi if I forgot my password?
Options:
- 🖥️ Use one of the methods above to find out the password on your computer.
- 📲 Bring the new device close to the router and use it WPS (button on the router).
- 🔄 Reset your router to factory settings (the password will be on the sticker).
If the router supports QR code to connect (for example, Huawei HG8045A), find it on the sticker or in the web interface.
🔄 How do I change my Rostelecom Wi-Fi password to a more secure one?
To change your password:
- Go to the router's web interface (
192.168.1.1). - Go to
Wi-Fi → Security. - In the field
Password(Key) enter a new key (recommended) 12+ characters with letters, numbers and signs). - Save the settings and reconnect all devices.
💡 Advice: Use password generators (eg. passwordsgenerator.net) and store the key in a password manager (KeePass, 1Password).
🛡️ Can Rostelecom change my Wi-Fi password remotely?
No, Rostelecom does not have access to your router and cannot change the Wi-Fi password without your knowledge. Exceptions:
- If the router rented at the provider and is tied to Rostelecom ID;
- If you have provided support access yourself (for example, through TeamViewer).
In other cases, changing the password is only possible through the router's web interface or a physical reset (Reset).