How to find your Wi-Fi router's IP address: all the methods for PC, phone, and command line

Your router's IP address is your router's digital "passport" on the local network. Without it, you can't access the control panel, change Wi-Fi settings, update firmware, or set up parental controls. But what if you've forgotten this address or never knew it? In this article, we'll cover it. 7 working methodsHow to find a router's IP address on any device—from a laptop to a smartphone.

It is important to understand that the IP address of the router is often the same as default gateway (default gateway) is the same address through which devices access the Internet. Most manufacturers (TP-Link, ASUS, D-Link, Keenetic) it is standard: 192.168.0.1 or 192.168.1.1. But if the address was changed manually or you have a non-standard model (for example, MikroTik), these methods will help to determine it in 1-2 minutes.

Some users are confused external IP (which is issued by the provider) and internal IP of the router (to access settings). This article is specifically about the internal address. If you need an external one (for example, for remote access), use services like 2ip.ru or whatismyip.com.

1. Standard IP addresses of routers by manufacturer

Before you dig into the settings, check typical address for your model. In 90% of cases, it's listed on a sticker on the back or bottom of the router (next to the SSID and Wi-Fi password). If there's no sticker, use the table below:

If you did not find your model in the table, try entering it in the address bar of your browser. 192.168.0.1, 192.168.1.1 or 10.0.0.1One of them will almost certainly work. If not, move on to the next methods.

⚠️ Attention: If the router was configured by the provider (for example, Rostelecom or Beeline), its IP may have been changed to a non-standard one. In this case, use the methods specific to your device (PC, phone, etc.).

2. How to find a router's IP address on Windows 10/11

On computers with Windows The easiest way to determine the router's IP is through command line or a graphical interface. Let's consider both options.

Method 1: Via Command Prompt (CMD)

This is a universal method that works on all versions of Windows:

1. Click Win + R, enter cmd and press Enter.
2. In the window that opens, enter the command:

   ipconfig /all

3. Find the block Ethernet Adapter or Wi-Fi Wireless Network Adapter (depending on the connection type).
4. Line Main gateway (Default Gateway) - this is the IP of your router.

Example output:

Wi-Fi Wireless Network Adapter:
...
IPv4 address. . . . . . . . . . . : 192.168.1.100
Main gateway. . . . . . . . : 192.168.1.1
...

Method 2: Via network settings

If the command line seems complicated, use the graphical interface:

1. Open Settings → Network & Internet.
2. Select Wi-Fi (or Ethernet, if connected via cable).
3. Click on your network name → Properties.
4. Scroll down to the block Properties - there will be a line IPv4 gateway.

3. Finding a router's IP address on macOS

On MacBook or iMac You can find your router's IP address through system settings or the terminal. The first method is easier, while the second is faster for experienced users.

Method 1: Via system settings

1. Open System Preferences → Network.
2. Select an active connection (Wi-Fi or Ethernet).
3. Click Additionally → tab TCP/IP.
4. Line Router (Router) is the IP of your router.

Method 2: Via Terminal

For team fans:

1. Open Terminal (you can use Spotlight: Cmd + Space → enter Terminal).
2. Enter the command:

   netstat -nr | grep default

3. In the output, find the line with default — the second column will be the router IP.

Example output:

default  192.168.1.1  UGSc  50  46 en0

Here 192.168.1.1 — the desired address.

4. How to find your router's IP address on Android and iPhone

Mobile devices are also connected to the router, so they can show its IP. The methods differ for Android And iOS.

On Android

The interface may differ slightly depending on the OS and shell version (MIUI, One UI, ColorOS), but the general principle is the same:

1. Open Settings → Wi-Fi.
2. Click on your network name (or the ⚙️ icon next to it).
3. Scroll down to the block Additionally or Network information.
4. Find the line Gateway or Router - this is IP.

If there is no such item, use the application WiFi Analyzer or Fing - they show the router's IP in the network information.

On iPhone (iOS)

On iPhone or iPad the path is this:

1. Open Settings → Wi-Fi.
2. Click on the symbol i in the circle next to your network.
3. In the block IPv4 find the line Router.

Example:

The address is given here 192.168.0.1.

5. Determining the router's IP address via the provider's web interface

Some internet service providers (eg. Rostelecom, MTS, Beeline) offer personal accounts, where you can see information about connected equipment, including the router's IP address. This is relevant if:

• 🔌 The router is issued by the provider and is linked to the account.
• 🔒 You can't access your router's control panel (for example, you forgot your password).
• 📡 You have GPON router (For example, Huawei HG8245H), where the IP may differ from the standard one.

Instructions:

1. Log in to your provider's personal account (the address is usually indicated in the contract or on the website).
2. Find the section My devices, Equipment or Wi-Fi settings.
3. The router information will indicate its local IP (sometimes it is hidden under a button Additional settings).

⚠️ Attention: The provider's personal account may display external IP (For example, 95.XXX.XXX.XXX), not the router's local address. Look specifically for the settings section. Wi-Fi or router.

6. Alternative methods: via network utilities

If standard methods don't work, use specialized programs. They are suitable for advanced users or non-standard networks.

Programs for Windows/macOS

• 🖥️ Advanced IP Scanner — scans the local network and shows all devices, including the router (usually the first one on the list).
• 🔍 Angry IP Scanner — a free utility for searching IP addresses on the network.
• 🌐 Wireshark — for experienced users (allows you to analyze network traffic and identify the gateway).

Android/iOS apps

• 📱 Fing — shows all devices on the network and the router IP.
• 🔗 Network Analyzer — contains tools for network diagnostics, including gateway search.
• 🛡️ IP Tools — a set of utilities, including a router search.

Example of work Advanced IP Scanner:

The router usually has a manufacturer's name (TP-LINK, ASUS) or designation Gateway.

What should I do if utilities don't find the router?

If programs do not detect the router, check:

1. Are you connected to its network (Wi-Fi or cable).

2. Is your firewall or antivirus software disabled (they may block scanning).

3. Was the router's IP changed manually (for example, to 192.168.100.1).

As a last resort, reset the router to factory settings using the button Reset (standard IP will be used).

7. If nothing works: reset the router to factory settings

In rare cases, the router's IP address may be changed to a non-standard one, and none of the above methods will work. Then the only thing left is hard reset:

1. Find the small button on the back of the router. Reset (sometimes it is recessed into the body).
2. Take a paper clip or a toothpick and press and hold the button 10-15 seconds.
3. Wait until the indicators on the router blink and it reboots.
4. After resetting, the IP will return to the factory settings (192.168.0.1 or 192.168.1.1).

⚠️ Note: Resetting deletes all settings router, including the Wi-Fi password, port forwarding, and parental controls. After this procedure, you'll need to set it up from scratch (login information is usually found on the router's sticker).

If you still can't access the control panel after the reset, it may be due to:

• 🔌 Cable problems (check the connection to the port WAN/LAN).
• 🔌 Router malfunction (indicators do not light or light abnormally).
• 🔌 Access blocked by the provider (relevant for rented routers).

Frequently Asked Questions (FAQ)

Is it possible to find out the router's IP address if I'm not connected to its network?

No. The router's IP is local address on its network. If you're not connected to Wi-Fi or a cable, it's impossible to identify it. Connect to the router's network and use any of the methods described.

Why does entering the router's IP address in the browser open an error instead of the control panel?

Possible reasons:

• 🌐 Incorrect IP address entered (check for typos).
• 🔌 The router is turned off or faulty.
• 🔒 Port 80 (for HTTP) blocked (try https://192.168.1.1).
• 📡 The router's IP has changed (use the methods in the article to determine it).

How can I find out my router's IP address if it's distributing internet via a 3G/4G modem?

In this case, the router may have a different IP, for example 192.168.8.1 (like Huawei or ZTE). Use:

1. Team ipconfig (Windows) or ifconfig (macOS/Linux).
2. Mobile application from the modem manufacturer (for example, Huawei HiLink).

Is it possible to change the router's IP address and why would I want to do this?

Yes, the router's IP can be changed in its settings (section LAN or Net). This may be needed:

• 🛡️ To increase security (to prevent attackers from guessing the standard address).
• 📡 To avoid IP conflicts in complex networks (for example, if there are two routers with the same IP).
• 🔧 For compatibility with some devices or software.

After changing the IP, do not forget to update it in the settings of connected devices (or reconnect them to the network).

What should I do if my router has a dynamic IP address from my ISP?

Dynamic external IP (issued by the provider) does not affect local IP of the router (the one needed to enter the settings). The local IP is always static and is set manually or by default (for example, 192.168.1.1). If the provider changes external IP, this does not interfere with the router configuration.