How to access the internet on an LG TV via Wi-Fi using the remote: full instructions

You bought LG Smart TV Do you want to use all the features of a smart TV—streaming services, YouTube, browsing, or online gaming? Without an internet connection, these features will remain unavailable. Fortunately, modern models LG support wireless connection via Wi-Fi, and you don’t need a keyboard or mouse to do this—a standard remote control is enough.

In this article, we will figure out how to connect a TV. LG Connect to the internet via Wi-Fi using a remote control, even if you've never set up a smart device before. We'll provide step-by-step instructions for different operating system versions. webOSWe'll explain possible errors and offer troubleshooting tips. And if your TV can't detect the network or keeps dropping connections, you'll find solutions for those issues, too.

Which LG models support Wi-Fi connectivity?

Before you begin setting up, make sure your TV is LG actually supports wireless connectivity. Almost everything Smart TV from LG, released after 2014, are equipped with a Wi-Fi module. However, there are some nuances:

• 📺 TVs with webOS (2014–present) — all models support Wi-Fi, including budget series. Examples: LG OLED C2, LG NanoCell 80, LG UK6200.
• 📺 NetCast TVs (2012–2013) — only some models have Wi-Fi (usually indicated in the specifications). Examples: LG 42LM620T, LG 55LA620V.
• 📺 Old models (before 2012) — as a rule, they only connect via cable or require an external Wi-Fi adapter.

To find out for sure if your TV has Wi-Fi, check:

1. Sticker on the back panel (look for the inscriptions Wi-Fi, Wireless LAN or wireless network logo).
2. User manual (section "Network connections").
3. TV menu: Settings → Network → Network Status.

⚠️ Attention: If your TV LG was released before 2014 and does not have built-in Wi-Fi, you will need a Wi-Fi adapter to connect to the Internet. USB/Wi-Fi adapter (For example, LG AN-WF100). Check the adapter's compatibility with your model on the manufacturer's website.

Preparing for connection: what to check before setting up

Before connecting the TV LG To connect to Wi-Fi, make sure everything is ready for successful setup. Often, problems arise not from faulty equipment, but from small details that were overlooked. Here's a checklist:

Please pay special attention to the following points:

• 🔋 Remote control If the buttons respond slowly or don't work, replace the batteries. You'll need all the keys to set up Wi-Fi, especially OK, Back and arrows.
• 📶 Wi-Fi signal — the TV should be no further than 10 meters from the router (without obstacles such as concrete walls). If the signal is weak, use repeater or connect the TV via cable.
• 🔒 Wi-Fi password - if you forgot it, look at the router sticker or in the router settings (usually the address 192.168.0.1 or 192.168.1.1).

If you connect your TV to hidden Wi-Fi network (without broadcasting the SSID), find out the exact network name in advance—you'll have to enter it manually. Also, check if the router is enabled. MAC address filter (in this case, you need to add the TV's MAC address to the list of allowed devices).

⚠️ Attention: Some providers block the connection of new devices by default (for example, Rostelecom or BeelineIf the TV doesn't connect, check your router settings or contact technical support.

Step-by-step instructions: how to connect your LG Smart TV to Wi-Fi using the remote control

Now let's move on to the main thing - connecting the TV to the Internet. These instructions are suitable for most models with webOS (including LG OLED, NanoCell, QNED etc.). If you have an older version of the software, some menu items may be slightly different, but the general algorithm remains the same.

Follow this order:

1. Turn on the TV and wait for the main screen to load. Press the button Settings (⚙️) on the remote (or Home → Settings, if the buttons Settings No).

2. Go to the section All settings (or Additional settings in older versions).

3. Select an item Net → Connecting to a Wi-Fi network.

4. The TV will begin searching for available networks. Wait for the scan to complete (usually takes 10-30 seconds).

5. Find in the list your Wi-Fi network and select it using the arrows on the remote control. Press OK.

6. If the network is password protected, a field will appear for input. Use virtual keyboard on the screen to enter the password. Use the arrows to switch between characters, and to confirm, OK.

7. After entering the password, click Connect (or Ready). TVAttempting to connect to the network.

8. If the connection is successful, a message will appear. Connected or Internet is available. Click OKto complete the setup.

If your TV doesn't find a Wi-Fi network, try adding it manually: in the connection menu, select Add a network manually and enter the name (SSID) and password.

What to do if your LG TV won't connect to Wi-Fi

Sometimes the connection fails the first time. Here are the most common issues and their solutions:

If the TV LG connects to Wi-Fi, but the internet doesn't work, try:

• 🔄 Reboot the router (turn off the power for 30 seconds).
• 📱 Check the internet on other devices (phone, laptop).
• 🔧 Reset your TV's network settings: Settings → Network → Network Reset.

⚠️ Attention: If the TV still doesn't connect after resetting the network, update the firmware. webOS via USB or contact a service center. Outdated software may conflict with modern Wi-Fi standards (e.g. Wi-Fi 6).

How to update firmware on an LG Smart TV without internet?

To update without the Internet, download the latest software version for your model from the website LG, save the file to a USB drive (FAT32 format) and connect it to the TV. Then go to Settings → Maintenance → Software Update → Update from USB.

Setting up advanced Wi-Fi settings on LG Smart TV

After successfully connecting to Wi-Fi, you can optimize your network settings for more stable performance. For example, if you have slow internet or frequently experience connection drops, it's worth adjusting a few settings.

Open the menu Settings → Network → Additional settings and pay attention to the following points:

• 🌐 DNS server — by default, the provider's DNS is used, but you can specify public DNS from Google (8.8.8.8) or Cloudflare (1.1.1.1). This will speed up page loading.
• 📡 Wi-Fi mode - if the router supports it 5 GHz, choose this frequency for less interference (but keep in mind that the signal 5 GHz (it goes through walls worse).
• 🔄 Automatic connection - Enable this option to have the TV connect to the network automatically after turning on.

If you use VPN on the router, some services (for example, Netflix or Disney+) may block content. In this case, disable your VPN or set up exceptions for your TV.

How to use the Internet on an LG TV after connection

Now that your TV is connected to Wi-Fi, you can use all the online features. Here's what's available on LG Smart TV:

• 🎬 Streaming services — Netflix, YouTube, Prime Video, Okko, ivi etc. (install applications via LG Content Store).
• 🌍 Web browser - built-in browser for viewing websites (available in the menu) Applications).
• 🎮 Online games - through LG Game World or cloud services like GeForce NOW.
• 📺 IPTV — watching TV channels via the Internet (you need to install the provider’s application).

To open a browser or application:

1. Click the button Home on the remote control.
2. Select a section Applications (or Premium for streaming services).
3. Find the desired application and click OK.
4. If the application is not installed, go to LG Content Store and download it.

For convenient control, you can connect Bluetooth keyboard or mouse (via USB or Bluetooth). This is especially useful for typing in a browser or searching for content.

Security: How to Protect Your LG TV on Wi-Fi

Connecting your TV to the internet not only opens you up to entertainment, but also to potential threats. Here are some tips on how to secure your device:

• 🔐 Update the firmware - Check for updates regularly Settings → Maintenance → Software Update.
• 🛡️ Disable unnecessary services - if you don't use a voice assistant LG ThinQ, disable it in privacy settings.
• 🌐 Use secure DNS - For example, 1.1.1.2 (Cloudflare with malicious site blocking).
• 🔄 Reset settings Before selling the TV, to remove personal data.

If you connect your TV to public Wi-Fi network (for example, in a hotel or cafe), avoid logging into personal accounts (banks, social networks) - such networks are often not protected.

⚠️ Attention: Some applications on LG Smart TV (especially third-party ones) may collect browsing data. To limit this, please visit Settings → Privacy and disable options like Collection of usage data.

FAQ: Frequently asked questions about connecting LG Smart TV to Wi-Fi

My LG TV can't detect Wi-Fi, even though other devices can connect. What's the problem?

Possible reasons:

• The TV's Wi-Fi module is disabled (check in Settings → Network).
• The TV does not support the Wi-Fi standard of your router (for example, Wi-Fi 6 on older models).
• Firmware failure - try updating the software.

Solution: Restart your TV and router, check your network settings.

How to connect LG Smart TV to a hidden Wi-Fi network?

In the connection menu, select Add a network manually, enter the network name (SSID) and password. Make sure the letters are case-sensitive.

The TV connects to Wi-Fi, but the internet isn't working. What should I do?

Check:

• Does the internet work on other devices?
• DNS settings (try specifying 8.8.8.8).
• Does your provider block the connection of new devices?

Is it possible to connect an LG TV to Wi-Fi without a remote?

Yes, there are several ways:

• Use the app LG TV Plus on your smartphone (connect your phone and TV to the same network).
• Connect a USB keyboard or mouse.
• Some models can be controlled using buttons on the rear panel.

How to reset network settings on an LG Smart TV?

Go to Settings → Network → Network Reset and confirm the action. After the reset, you will need to re-enter the Wi-Fi password.