Connecting Samsung to Wi-Fi via WPS: Instructions for TVs and Smartphones

Technology WPS (Wi-Fi Protected Setup) Allows you to connect to a wireless network without entering a password—just press a button on the router or enter a PIN. This is especially convenient for devices Samsung, where entering a complex password from a remote control or smartphone screen can take a long time. However, not everyone knows how to properly activate this mode and what nuances to consider when setting it up.

In this article we will go through step-by-step instructions for Samsung Smart TVs (QLED, Crystal UHD, The Frame series, etc.) and Galaxy smartphones (including models S23, A54, Z Flip5 and others). You'll also learn why WPS might not work, how to bypass common errors, and how this method differs from a classic password connection. If your router doesn't support WPS or the feature is disabled, we'll show you how to enable it on popular models. TP-Link, ASUS, Keenetic And MikroTik.

Before you begin, make sure your router is within range and your device is Samsung Wi-Fi is enabled. If you are using a dual-band router (2.4 GHz + 5 GHz), check if your device supports it. WPS on a 5 GHz network - many models only work with the 2.4 GHz range.

What is WPS and why is it more convenient than a password?

WPS (Wi-Fi Protected Setup) is a wireless communication standard that simplifies connecting devices to a network without manually entering a password. There are three main methods of authentication via WPS:

• 🔘 Button on the router — physical or virtual (in the web interface). Pressing this button activates pairing mode for 2 minutes.
• 📌 PIN code — An 8-digit code entered on the device. This can be found on a sticker on the router or generated automatically.
• 📱 NFC — bringing the device close to the router (rarely used in domestic settings).

The main advantages of WPS over a classic connection:

• ⚡ Speed — the connection is established within 10–30 seconds.
• 🔒 Security — eliminates password interception via brute force (if the router is configured correctly).
• 🎮 Convenience for devices without a keyboard — ideal for TVs, printers, smart speakers.

However, the technology also has its drawbacks:

• ⚠️ Vulnerability to brute-force attacks on PIN codes (if the router uses a standard 8-digit code).
• ⚠️ Not all modern routers support WPS (especially models with firmware OpenWRT or DD-WRT).
• ⚠️ In some countries (e.g. Germany), WPS is disabled by default due to legal restrictions.

If your router was manufactured after 2020, check that WPS isn't disabled in the security settings. In some cases, you may need to enable it manually.

Preparing the router: enabling WPS

Before connecting the device Samsung Make sure WPS mode is enabled on your router. The instructions vary depending on your router model, but the general process is the same:

1. Connect to the router via cable or Wi-Fi (if already connected).
2. Open the web interface by typing in your browser 192.168.0.1, 192.168.1.1 or another IP (indicated on the router sticker).
3. Log in (default logins: admin/admin, admin/password or see sticker).
4. Go to the section Wi-Fi → WPS (or Wireless network → Quick setup).
5. Activate WPS and select the connection method (push-button or PIN).

Examples for popular brands:

If there is no WPS section in the router interface, check:

• 🔄 Update your router firmware (in older versions, WPS may have been removed due to vulnerabilities).
• 🔍 Make sure your router is not in standby mode bridge or repeater — WPS is usually disabled in these modes.
• 🛡️ Check if WPS is blocked by a firewall or parental controls.

What to do if WPS does not turn on?

If after activating WPS in the router settings the button does not respond to pressing, try:

1. Reboot the router (turn off the power for 30 seconds).

2. Reset to factory settings (button Reset on the back panel).

3. Check if WPS conflicts with other functions (e.g. Wi-Fi Direct or Guest network).

If the problem persists, contact the router manufacturer's support team.

Connecting a Samsung TV to Wi-Fi via WPS

The instruction is valid for Smart TV Samsung at the base Tizen OS (2016 and newer models, including series QLED, Crystal UHD, The Frame, Serif). For older TVs on Orsay OS (before 2015) the process may differ.

Turn on the TV and wait for Tizen to load|

Go to Settings → General → Network|

Choose Open network settings|

Make sure Wi-Fi is turned on (slider in position On)-->

Step-by-step instructions:

1. On the remote control Samsung press the button Home (home).
2. Go to Settings (gear icon) → General → Net → Open network settings.
3. Select Wireless network → List of networks.
4. At the bottom of the screen, tap Additional settings (or Other parameters).
5. Select Connection via WPS (PBC) - This is a method with a button on the router.
6. Click BeginYou will have 2 minutesto activate WPS on your router.
7. Press the physical button on the router WPS (usually with the 🔄 icon) or activate WPS in the web interface.
8. Wait for the message Connected on the TV screen.

If the TV does not find the network via WPS:

• 🔄 Restart your router and TV.
• 📶 Make sure the TV and router are in the same room (walls and obstacles can block the signal).
• 🔧 Check if the router is in the "Secure Mode" mode. Hidden network (Hidden SSID) — WPS doesn't work with it.

Connecting a Samsung smartphone to Wi-Fi via WPS

On smartphones Samsung Galaxy (including models S23, A54, Z Fold5, M34 and others) connection via WPS is carried out through the Wi-Fi menu. However, in the latest versions Android 13/14 and shells One UI 5.0+ This method can be hidden - it is replaced by Wi-Fi Direct or Easy Connect.

Instructions for One UI 4.0–6.0:

1. Open Settings → Connections → Wi-Fi.
2. Tap on the three dots (⋮) in the upper right corner and select Additional functions (or Advanced settings).
3. Select WPS push button (or WPS Push Button).
4. Click Connect and during 2 minutes Activate WPS on your router.
5. Wait for the connection to complete. If prompted to enter a PIN, use the code on the router's sticker.

If there is no WPS item in the menu:

• 📱 Update your smartphone firmware (Settings → Software Update).
• 🔍 Check if the feature is disabled in Settings → Connections → Wi-Fi → ⋮ → Smart Network.
• 🔄 Restart your smartphone and router.

In Samsung smartphones running Android 12 and later, WPS may be replaced by technology Wi-Fi Easy Connect (standard WPA3). In this case, the connection is made via a QR code generated by the router.

Common errors and their solutions

Even with proper WPS configuration, issues can still occur. Let's look at common issues and how to troubleshoot them:

Additional nuances:

• 🔌 If the router is connected via PPPoE (As with some providers), WPS may not work until authorization is complete. First, connect to the internet via cable.
• 🛡️ On corporate routers (for example, Cisco or Ubiquiti) WPS is often disabled due to security policy.
• 📡 In apartment buildings, conflicts are possible if neighbors also use WPS. In this case, try connecting at a different time.

Why can WPS be dangerous?

If your router uses a standard PIN code (for example, 12345670 or 00000000), attackers can pick it up in a few hours. To protect yourself:

1. Change the WPS PIN code in the router settings to a random one.

2. Disable WPS after connecting the devices.

3. Use WPA3 instead of WPA2, if the router supports it.

Alternative connection methods if WPS doesn't work

If connecting via WPS is not possible, use alternative methods:

• 🔑 Classic connection with password:
  1. On the device Samsung Select a Wi-Fi network from the list.
  2. Enter your password (case sensitive!).
  3. Confirm the connection.
• 📷 QR code (Wi-Fi Easy Connect):
  1. Generate a QR code for the network in the router's web interface.
  2. Open the camera on your smartphone Samsung and point to the code.
  3. Confirm the connection.

🔌 WPS via PIN code (if the button does not work):

1. In the WPS menu on your device, select PIN method.
2. Enter the 8-digit code from the router sticker.
3. Wait for connection.

For TVs Samsung connection method is also available via SmartThings (smart home app):

1. Install the application SmartThings on your smartphone.
2. Add the TV to the list of devices.
3. Follow the instructions to connect to Wi-Fi.

- On TV: Settings → Support → Self-diagnosis → Network reset.

- On a smartphone: Settings → General Management → Reset → Reset Network Settings.-->

Security: How to Secure Your Network Using WPS

Despite its convenience, WPS can become a vulnerability if you don't take precautions. Follow these guidelines:

• 🔐 Disable WPS after connecting devices (if you don’t plan to add new ones).
• 🔄 Change the default PIN code to a random 8-digit code in the router settings.
• 🛡️ Use WPA3 instead of WPA2 (if the router supports it).
• 📵 Disable WPS for the guest network - it must be isolated.

Check if your router is vulnerable to WPS attacks:

1. Run a network scan using apps like Wifi Analyzer or Fing.
2. Make sure there are no suspicious connection attempts in the router logs.
3. If you notice unauthorized devices, change your Wi-Fi password and disable WPS.

Attention: If your router is older than 5 years, the likelihood of WPS vulnerabilities is higher. Consider updating the firmware or purchasing a new router with support. WPA3.

FAQ: Frequently asked questions about WPS on Samsung

My Samsung TV doesn't see the WPS button in the menu. What should I do?

If on the menu Settings → Network There is no WPS option, check:

• TV model - WPS is only supported on Smart TV 2016 and newer.
• Firmware region - in some countries (for example, Germany) WPS is disabled by law.
• Update your TV software via Settings → Support → Software Update.

If WPS is still missing, use a password connection or an app connection. SmartThings.

Can I connect my Samsung Galaxy Watch to Wi-Fi via WPS?

Smartwatch Galaxy Watch 4/5/6 do not support WPS. To connect to Wi-Fi:

1. Use the app Galaxy Wearable on a smartphone.
2. Select the network and enter the password manually.

WPS is only available on smartphones and TVs. Samsung.

The router is blinking, but the TV won't connect. What's the problem?

Possible reasons:

• Pairing timed out (2 minutes). Please repeat the process.
• The router and TV operate in different ranges (for example, the router operates on 5 GHz, and the TV only supports 2.4 GHz).
• The MAC address filter is enabled on your router. Disable it in the settings.

Try connecting using a PIN code or reset the network settings on your TV.

How do I know if my router supports WPS?

Check:

• A sticker on the router - if there is a logo WPS or a button with the 🔄 icon.
• Router web interface - section Wi-Fi or Wireless network.
• The instructions for the router (look for a mention Wi-Fi Protected Setup).

If your router was released after 2020, WPS may be disabled by default. Enable it manually.

Can I use WPS to connect a Samsung printer?

Yes, many printers Samsung (for example, series Xpress or ProXpress) support WPS. Instructions:

1. On the printer, press Menu → Network → Wi-Fi → WPS.
2. Select Push Button and press OK.
3. Activate WPS on your router within 2 minutes.

If WPS doesn't work, connect the printer via USB cable or Samsung Mobile Print.

If your problem is not resolved, please specify the device model. Samsung and router in the comments. We'll help you figure it out!