How to Share Internet from the Honor 9X via Wi-Fi: 3 Working Methods + Troubleshooting

Smartphone Honor 9X (models HLK-L41, HLK-L42) remains a popular device for distributing mobile Internet, despite the release of new lines. Its key advantage is support dual Wi-Fi (simultaneous operation in 2.4 GHz and 5 GHz modes), which allows for the creation of a stable access point even in conditions of interference. However, many users encounter issues: the access point suddenly disconnects, devices fail to connect, or speeds drop 2-3 times compared to a direct connection.

In this article you will find Three proven ways to distribute Wi-Fi With Honor 9X (including hidden settings for Android 10/11), compatibility table with other devices, and solutions unique errors, specific to this model—for example, when the access point turns on but doesn't distribute traffic due to a conflict with the IPv6 protocol. All instructions have been tested on firmware Magic UI 3.1 And EMUI 10.1.

1. Standard method: "Access point" mode in the settings

The most obvious method is to use a built-in function Modem and access pointIt's suitable for 90% of tasks, but it has limitations: for example, on some carrier plans (MTS, Beeline), the upload speed is artificially capped at 10 Mbps. Here's how to enable this mode correctly:

1. Open Settings and go to the section Mobile Network → Access Point and Modem (on some firmware versions the path may differ: Wireless Networks → More → Tethering).
2. Tap on the item Wi-Fi hotspot and activate the slider.
3. Click Setting up an access pointto ask:
   • 🔐 Network name (SSID): use Latin (for example, Honor9X_Hotspot), avoid Cyrillic and special characters - they can cause connection problems on Windows.
   • 🔒 Password: minimum 8 characters, must include numbers and capital letters (example: X9Hot5pot!).
   • 📶 Range: select 2.4 GHz for maximum compatibility or 5 GHz for less interference (but shorter range).

Save the settings and connect the device to the created network.

⚠️ Attention: If the internet doesn't work after connecting a device (like a laptop), check if it's blocked operator firewallSome plans (for example, "For Laptop" from Tele2) require additional activation of the "Internet Sharing" option in your personal account.

Mobile internet on the Honor 9X is stable (check the speed with Speedtest)|The device is charged to at least 30% (data sharing drains the battery significantly)|The SIM card has sufficient traffic (some operators block data sharing when the balance is zero)|VPN and proxy are disabled (they may interfere with data sharing)

-->

2. Alternative Method: USB Modem for PC

If you need to distribute the Internet on a desktop computer or laptop without Wi-Fi, use the mode USB modemThis method is more stable than Wi-Fi, as it's not affected by interference or limitations on the number of connected devices. The downside is that it requires a cable. USB Type-C (complete with Honor 9X there is a cable USB-A → USB-C).

Instructions:

1. Connect your smartphone to your PC using a cable.
2. In the settings Honor 9X go to Modem and Access Point → USB Modem and activate the function.
3. Wait for the drivers to install on your computer (Windows usually installs them automatically). If the network connection does not appear, check device Manager for the presence of an exclamation mark next to Honor 9X Remote NDIS.
4. If necessary, update the driver manually by downloading it from Huawei's official website (section "Software and drivers" for the model Honor 9X).

⚠️ Attention: On macOS, additional network configuration may be required. Go to System Preferences → Network, select the connection Honor 9X and manually specify DNS servers (for example, 8.8.8.8 And 8.8.4.4 from Google).

3. Hidden settings: "Portable Wi-Fi router" mode

Few people know, but in Honor 9X there is a hidden function Portable Wi-Fi router, which allows you to distribute the Internet simultaneously via Wi-Fi And via USB/Bluetooth. This is useful if you need to connect multiple devices using different methods. It's activated through the engineering menu:

1. Open the app Telephone and enter the combination:

   ##4636##

2. In the menu that opens, select Phone information.
3. Scroll down to the block Wi-Fi settings and tap on Wi-Fi router mode.
4. Enable the option and configure the network settings (similar to a standard access point).

⚠️ Attention: Once this mode is activated, the standard function Access point The option may disappear from the settings. To get it back, reset the network settings: Settings → System → Reset → Reset network settings.

What should I do if the engineering menu doesn't open?

If the combination ##4636## doesn't work, try:

1. Remove all characters before entering (including *).

2. Use an alternative combination: ##2846579## → ProjectMenu → Background Settings → Wi-Fi.

3. Update the firmware to the latest version (in some builds the engineering menu is disabled).

4. Device compatibility table with the Honor 9X hotspot

Not all devices connect equally well to an access point. Honor 9XBelow is the compatibility data with popular gadgets (tested on firmware Magic UI 3.1.0.156):

Device	2.4 GHz band	5 GHz band	Notes
Laptops with Windows 10/11	✅ Stable	✅ Stable	There may be problems with IPv6 - disable it in the connection properties.
MacBook (2018–2023)	✅ Stable	⚠️ Connects, but interruptions are possible	It is recommended to fix the IP manually.
iPhone (iOS 15–17)	✅ Stable	❌ Doesn't connect	There is a problem with the WPA3 security protocol - switch to WPA2 in the access point settings.
Android devices (Samsung, Xiaomi)	✅ Stable	✅ Stable	On Xiaomi, you may need to disable "Smart Wi-Fi Switching".
Game consoles (PS5, Xbox Series X)	✅ Stable	❌ Doesn't connect	Use only 2.4 GHz and disable MAC address filtering.

🔹 Conclusion: For maximum compatibility, use the range 2.4 GHz and security protocol WPA2-PSKIf you need to connect devices to 5 GHz, please check their support for this range first.

5. Solving common problems

Even if the access point is configured correctly, Honor 9X may not work correctly. Here top 5 mistakes and their solutions:

• 🔌 The access point turns on, but the Internet is not distributed.
  Cause: IPv6 conflict or operator restriction.
  Solution: Disable IPv6 in your hotspot settings (if available) or restart your smartphone. If the problem persists, call your carrier and confirm whether tethering is allowed on your plan.
• 📵 The devices connect, but after 5-10 minutes they disconnect.
  Cause: Power saving turns off the Wi-Fi module.
  Solution: Go to Settings → Battery → Performance mode and add the application Settings to the list of exceptions.
• 🔒 Unable to change access point password
  Cause: Firmware limitation or settings failure.
  Solution: Reset network settings (Settings → System → Reset → Reset network settings) or update the firmware.
• 📡 The distribution speed is 2-3 times lower than a direct connection
  Cause: Operator restriction or interference on the air.
  Solution: Check the speed without tethering (on the smartphone itself). If it's high, change the Wi-Fi channel in the access point settings (select Channel 6 or 11 for 2.4 GHz).
• ⚡ The battery drains quickly when distributing
  Cause: The Wi-Fi module consumes a lot of power.
  Solution: Connect your smartphone to a charger or activate the mode Energy saving (but this may reduce speed).

1) Power saving settings (Wi-Fi should not be turned off in the background).

2) Operator restrictions (some tariffs block distribution).

3) Interference from other networks (use apps like Wi-Fi Analyzer to select a free channel).-->

6. Speed ​​and stability optimization

To access the point on Honor 9X To ensure it works as efficiently as possible, follow these tips:

• 📶 Selecting a Wi-Fi channel
  

  By default, your smartphone selects a channel automatically, but this isn't always optimal. Install the app Wi-Fi Analyzer (available in the Play Market) to find the least crowded channel in your area. Recommended channels for 2.4 GHz 1, 6 or 11 (they do not intersect).

• 🔄 Disabling background activity
  

  Close all apps that may consume data in the background (e.g., cloud services, instant messaging apps with automatic updates). This will free up processor resources. Kirin 710F and will increase the distribution speed.

• 🔋 Using Airplane Mode
  

  If you need to distribute only to one device (for example, a laptop), turn on Honor 9X Airplane mode, and then manually activate Mobile data And Wi-FiThis will disable background processes related to network searching.

• 🛡️ DNS setup
  

  By default, the operator's DNS is used, which can be slow. Specify alternative DNS in the access point settings:

  • 1.1.1.1 (Cloudflare) - for maximum speed;
  • 8.8.8.8 (Google) - for stability;
  • 77.88.8.8 (Yandex) — for Russian websites.

⚠️ Attention: On firmware Magic UI 3.1 There's a bug in Android and older: when changing the DNS through the access point settings, the changes may not be applied. In this case, change the DNS directly on the connected device (e.g., a laptop).

7. Security: How to protect your access point

An open or poorly secured access point Honor 9X Your network may become a target for hackers or neighbors who may "hang on" to your network, slowing down your speed. Follow these rules:

• 🔐 Complex password
  

  Don't use simple combinations like 12345678 or qwerty123Optimal password: 12+ characters with a mix of letters, numbers, and special characters (example: H0n0r9X_H0t$p0t!).

• 🔄 Changing your password regularly
  

  Change your password every 1-2 months, especially if you connect in public places.

• 📵 Disabling the access point when idle
  

  Don't leave the sharing feature running unless absolutely necessary—this saves battery life and reduces the risk of unauthorized connections.

• 👤 MAC address filtering
  

  You can specify a list of allowed MAC addresses in the access point settings (they can be found in the network properties on the connected device). The downside is that you'll have to manually add each new device.

🔹 Additional tip: If you often need to share internet in cafes or on public transport, install the app NetGuard (without root). It blocks background traffic and shows which apps are trying to access the network through your hotspot.

FAQ: Frequently asked questions about Wi-Fi hotspots on the Honor 9X

Is it possible to share Wi-Fi from the Honor 9X without a SIM card (only via a connected Ethernet cable)?

No, Honor 9X does not support the mode USB Ethernet (unlike Huawei's flagship models). To share the internet, you need a SIM card with mobile data or a connection to another Wi-Fi network (function Repeater mode, but it is not available on all firmware versions).

Why does my Honor 9X display the error "Obtaining IP address" when connecting to a hotspot?

This error occurs due to a DHCP conflict. Try:

1. On the connecting device, manually set the IP address (for example, 192.168.43.100 with a mask 255.255.255.0).
2. On Honor 9X Reboot the access point (disable/enable).
3. Reset network settings on your smartphone.

If that doesn't help, there might be a firmware issue. Update it to the latest version.

How to share internet from the Honor 9X to multiple devices simultaneously?

The standard access point supports up to 8 connections, but in practice, speed can drop even with just 3-4 devices. To improve the situation:

• Use range 5 GHz (if all devices support it).
• Disable background updates on connected gadgets.
• Activate the mode Portable Wi-Fi router (see section 3).

Is it possible to share Wi-Fi from Honor 9X on a permanent basis (24/7)?

Technically yes, but that's greatly reduces battery life and leads to overheating. If you need constant internet access, it's better to:

• Use USB modem with power connected.
• Buy a separate 4G router (for example, Huawei E5577).
• Set up automatic shutdown of the access point after 1–2 hours of inactivity (some firmware versions have this option).

Why is my carrier blocking internet tethering on my Honor 9X?

Some plans (especially "unlimited" plans) artificially limit data transfer to prevent your smartphone from being used as a full-fledged router. To bypass this block:

• Change your tariff to one that allows data sharing (for example, "For a laptop" on Tele2).
• Use a VPN on the connected device (but this may reduce speed).
• Try it USB modem — Some operators block only Wi-Fi distribution.

⚠️ Please note that bypassing restrictions may violate your operator's user agreement.

If your question is not covered in the FAQ, please check the details in official documentation To Honor 9X or contact Huawei/Honor support. To diagnose connection issues, it's also helpful to study thematic forums, where users share unconventional solutions.