How to change the Wi-Fi password on an ETA router: instructions for all models

Forgot your home Wi-Fi password or want to update it for security? Routers ETA (including popular models ETA 4G, ETA Wi-Fi 6 (and budget series) allow you to change the network key through the web interface—but only if you know how to access it. Many users encounter problems: the address 192.168.1.1 It doesn't open, either the old password doesn't work, or the settings are reset after a reboot.

In this article we will analyze all ways to change your password on routers ETA — from basic steps to solving common mistakes. We'll also tell you, Which encryption should I choose? (WPA2-PSK or WPA3) to ensure the network is reliable but compatible with all devices. If your router returns an error Invalid password or doesn't save changes - you'll find the solution here.

⚠️ Important: Router interface ETA may vary depending on the firmware version. If your control panel looks different than the screenshots in the instructions, check the router model on the sticker on the bottom and compare it with FAQ section.

1. Preparation: What you need to know before changing your password

Before changing your password, make sure that:

• 🔌 Router ETA The power indicator is green (or blue, depending on the model). If it's blinking red, there's a connection error.
• 💻 You have a device (laptop, smartphone, tablet) connected to this router via cable or via Wi-Fi. For the first login, it is better to use wired connection - this eliminates any problems with authorization.
• 📝 Current settings recorded: network name (SSID), the encryption type, and the old password (if you remember it). This will come in handy if the network stops working after the changes.

If you don't remember the old password and you can't connect to the router, you'll have to do factory resetTo do this, press and hold the button Reset (usually recessed into the router's case) for 10-15 seconds until the indicators blink. After the reset, the network name and password will return to the default ones (indicated on the router's sticker).

2. Login to the ETA router control panel

To change your Wi-Fi password, you need to access your router's web interface. To do this:

1. Open your browser (Chrome, Firefox, Edge) on the device connected to the router.
2. In the address bar, enter one of the IP addresses:
   • 192.168.1.1 - standard for most models ETA.
   • 192.168.0.1 — an alternative option (less common).
   • eta.local - if the router supports a domain name (check the sticker).

Click EnterAn authorization window should open.

If the page does not load:

• 🔄 Check that you are connected to the correct network (not your neighbor's!).
• 🔧 Disable VPN or proxy in your browser.
• 📱 On your smartphone, try opening the address in incognito mode.
• 🖥️ If you are using a cable, make sure it is connected to the port LAN (Not WAN).

In the authorization window, enter:

• Login: admin (default for all ETA).
• Password: admin or password (Indicated on the router sticker). If it doesn't work, someone has already changed the settings.

3. Step-by-step instructions: how to change your Wi-Fi password

After successfully logging into the control panel:

1. Go to the section Wi-Fi or Wireless network (The name depends on the model). It is usually located in the main menu on the left.
2. Select a tab Security (Security). Here you can change:
   • 🔐 Encryption type (recommended) WPA2-PSK or WPA3-PSK).
   • 🔑 Network password (think of a secure one, minimum 8 characters).

In the field Wi-Fi password (Wi-Fi Password or Pre-Shared Key) Enter a new key. Use a combination of letters, numbers, and symbols, for example: K7#pL9!mQ2.

Click Save (Save or Apply).

After saving, the router will reboot and all devices will be disconnected from Wi-Fi. To reconnect, use the new password.

Have you created a strong password (at least 8 characters)?

Is the correct encryption type selected (WPA2 or WPA3)?

Are important devices connected via cable (in case of Wi-Fi failure)?

Is the new password written down on paper or in notes?

4. Which encryption should I choose: WPA2 or WPA3?

When changing the router password ETA You'll be prompted to select a security type. This determines which devices can connect to your network:

If you have smart light bulbs, old printers or game consoles (For example, PS3 or Nintendo Switch first version), choose WPA2-PSK. For a network with only modern devices (iPhone 12+, Samsung Galaxy S21+, laptops after 2020) you can safely install WPA3-PSK.

5. Common mistakes and how to fix them

Even after changing your password correctly, problems may arise. Let's look at the most common ones:

• 🚫 The new password does not work when connecting.
  

  Check:

  • Letter case (passwords) Password And password - different!).
  • Keyboard layout language (Russian letters are not allowed in an English password).
  • Type symbols @, #, $ - they are easy to miss when typing.
• 🔄 The router does not save settings
  

  Possible reasons:

  • Firmware failure - try updating the software in the section System → Update.
  • Low memory - reset your router to factory settings.
  • IP address conflict - reboot your router and computer.
• 📡 Wi-Fi disappears after changing the password
  

  This means the router isn't applying the settings. Check:

  • Is the wireless module enabled in the section? Wi-Fi → Basic Settings.
  • Isn't there a tick? Hide SSID (if yes, remove it).
  • Does the new Wi-Fi channel conflict with neighboring networks (change the channel manually).

If nothing helps, do hard reset (button Reset) and configure the router again.

What should I do if my router doesn't provide internet after a reset?

After the reset, you need to reconfigure your connection to your provider. Go to the section Network → WAN and enter the data from the contract (usually this is PPPoE-logins or parameters DHCP). If you don't know them, call your provider's support team.

6. Additional security settings

Changing your password is just the first step to securing your network. To make your Wi-Fi even more secure:

• 🔒 Disable WPS
  

  Function WPS vulnerable to hacking. Go to Wi-Fi → WPS and deactivate it.

• 📋 Enable MAC address filtering
  

  In the section Wi-Fi → MAC Filter You can specify which devices are allowed to connect. Cons: You'll have to manually add the addresses of new devices.

• 🔄 Update your router firmware
  

  IN System → Software Update Check if the version is up to date. Outdated software contains vulnerabilities.

• 🕒 Set up a Wi-Fi schedule
  

  If the network is not needed at night, turn it off automatically. Wi-Fi → ScheduleThis will reduce the risk of night attacks.

⚠️ Attention: MAC address filtering isn't a panacea—experienced hackers can spoof addresses. Use it as a supplemental measure, not as your primary defense.

7. How to change your password using the ETA mobile app

Some models ETA (For example, ETA Wi-Fi 6 AX1800 or ETA 4G-LTE) support control via the official app ETA Router (available for Android And iOS). To change your password through it:

1. Download the app from App Store or Google Play.
2. Connect to the router's network ETA.
3. Open the application and log in (login/password are the same as for the web interface).
4. Go to the section Wi-Fi → Security settings.
5. Change your password and save your settings.

📌 Application advantage: You can control the router remotely (if the function is enabled in the settings).

📌 Flaw: not all models ETA supported - check compatibility on the manufacturer's website.

8. Frequently Asked Questions (FAQ)

Is it possible to change the Wi-Fi password without accessing the router?

No. To change the password, you need access to the router's control panel. ETA — either via cable or via your current Wi-Fi network. If you've forgotten your login details, you'll have to reset them using the reset button. Reset (all settings will be lost!).

Which password is more secure: a long one made of words or a short one made of symbols?

It's best to combine both approaches. An example of a strong password: Cat! Flies_On_A_Plane777It's long (20 characters) and contains capital letters, numbers, and punctuation. Avoid obvious words like qwerty or password.

Why don't some devices connect after changing the password?

Most likely, they do not support the selected encryption type. For example, older printers or Android- smartphones up to version 10.0 may not work with WPA3Solution: Go back to WPA2-PSK or turn on mixed mode WPA2/WPA3.

How do I know who is connected to my Wi-Fi?

Go to your router's control panel ETA, then to the section Wi-Fi → Clients (or DHCP → Client List). All connected devices will be displayed there, along with their IP and MAC addresses. If you see any unfamiliar devices, change the password.

Is it possible to set a password using emoji?

Technically yes, but we don't recommend it. Not all devices handle emojis in passwords correctly, which can lead to connection issues. Limit yourself to Latin characters, numbers, and standard symbols (!@#$%).