Many users find themselves in a situation where the default wireless network name assigned by their ISP or manufacturer no longer suits them. This may be due to a desire to personalize their home network, hide the equipment model from prying eyes, or simply tidy up the list of available connections. Regardless of the reason, the change procedure SSID (Service Set Identifier) is a basic home network administration skill.
In the ecosystem Rostelecom This process may vary depending on the model of your router, whether it is a branded RT series device or a branded model from Sagemcom, Eltex And SercommUnderstanding how the web interface works will allow you to easily manage your broadcast settings.
Before you begin configuring the settings, you need to ensure a stable connection to the router itself. It's best to do this by connecting a computer to the device. Rostelecom via cable LANTo prevent connection interruptions when making changes to the wireless module configuration. This is especially important for older models, where rebooting the interface can take up to a minute.
Preparing to change network settings
Getting started always requires access to the device's administrative panel. To do this, you'll need to know the default gateway IP address for the equipment. Rostelecom most often constitutes 192.168.1.1 or 192.168.0.1Enter this address in the address bar of any browser. If the page doesn't open, check your TCP/IP settings in your network adapter properties—they should be set to obtain addresses automatically.
The next critical step is authorization. On the back of each router RT or Sagemcom There is a sticker with factory data. It contains the login and password for entering the system, usually it is admin And admin, or a unique password generated by the manufacturer. If you previously changed this information and forgot it, you will need to perform a factory reset.
⚠️ Important: If you're changing settings via a Wi-Fi connection, be aware that your network will be temporarily disconnected while the new settings are being saved. Make sure you have the option to manually reconnect to the new network if the automatic connection fails.
Modern routers Rostelecom often have dual-band modules operating at 2.4 GHz and 5 GHz frequencies. When changing the name, you will most likely have to specify SSID for each range separately, or combine them into a single network with the function Smart Connect, if this option is supported by your hardware model.
Login to the router's web interface
After entering the IP address in your browser, a login page will open. Enter the credentials found on the sticker. If you are using a device from the RT-AX or newer, the interface may offer quick setup via a mobile app, but for detailed work, it is better to select "Advanced settings" or "Web configurator".
Interfaces from different manufacturers supplying equipment for Rostelecom, may differ visually. Eltex The menu is often located in the left vertical panel, whereas Sagemcom The main tabs are at the top. However, the logic remains the same: look for the section related to the wireless network (WLAN, Wi-Fi or Wireless).
Some firmware versions contain protection against accidental changes that require confirmation of actions. If the system prompts you to update the firmware or reboot during the login process, wait until the process completes. Interrupting the update may result in a software crash.
Step-by-step instructions for different router models
The steps to follow depend on the manufacturer of your device. Let's look at the main scenarios for the most common models on the network. Rostelecom.
For routers Sagemcom (series F@st 2804, 3804, etc.) you need to go to the tab Setup or Settings, then select Wi-Fi or WLANIn the field SSID Name or Network name Enter the desired name. Don't forget to click the button Apply or Save at the bottom of the page.
In devices Eltex (NTU-2W, WEP-2W) the path looks like this: Settings → Wi-Fi → MainHere in the field SSID A new name is entered. The peculiarity of these routers is that changes take effect instantly, but sometimes a manual reboot through the menu is required. System.
☑️ Checklist before changing your name
Branded routers Rostelecom (series RT) often use a unified interface. Go to the section Wi-Fi network → Basic settingsHere you can change the name for the guest network and the main network separately. After entering the information, be sure to click the button Apply.
| Router model | Path to the menu | Field name | Action after input |
|---|---|---|---|
| Sagemcom F@st 2804 | Setup → WLAN → Basic | SSID | Click Apply/Save |
| Eltex NTU-2W | Settings → Wi-Fi → General | SSID | Save and reload |
| RT-AX-1200 | Wi-Fi Network → Basic | Network name (SSID) | Apply |
| Sercomm RV6699 | Wi-Fi → General | Network name (SSID) | Save |
Using the My Rostelecom app
For users who prefer control via smartphone, the company Rostelecom developed an application My RostelecomThis is a convenient way to change the Wi-Fi name without having to remember IP addresses and delve into the web interface. The app is available for platforms Android And iOS.
After logging into the app (using your personal account credentials or contract number), select your device from the list of devices. In the router management menu, find the "Devices" section. Wi-FiThe current network name will be displayed there, along with a field for editing it. Enter the new value and confirm the action.
It's important to note that the app only works if your phone is connected to the router's network or has internet access to communicate with the cloud. After changing the name in the app, the phone used to configure it will likely lose connection, as the network with the old name will disappear.
Features of dual-band networks (2.4 GHz and 5 GHz)
Modern equipment Rostelecom supports operation in two frequency ranges. This creates a nuance when renaming: you can give the same name to both ranges or separate them. If you use the function Smart Connect (or Band Steering), the router itself will manage the connection of devices, and the network name will be the same for both ranges.
If you decide to disable range merging, you will have to specify two names. For example, MyHome_WiFi And MyHome_WiFi_5GThis is useful if you want to force your desktop PC or TV to connect to the faster 5 GHz band while keeping your smart bulbs on 2.4 GHz.
⚠️ Note: Devices that only support 2.4 GHz (most IoT devices, older smartphones) will not see a network called "5G" unless you create a separate access point for them on a low frequency or enable compatibility mode.
When separating names, make sure you understand which network you're connecting to. Data transfer speeds in the 5 GHz band are significantly higher, but the range is shorter. Proper naming will help you navigate available connections.
Security and network naming
When coming up with a new name for Wi-Fi, it's important to be guided not only by creativity, but also by security considerations. Network name (SSID) is visible to everyone within range. Don't use your exact address, apartment number, last name, or phone number in your name. This could be a source of social engineering or simply a violation of your privacy.
Also, you shouldn't include the router model in the name if you don't want to attract the attention of hackers who know the vulnerabilities of specific models. Sagemcom or EltechAn abstract name, for example, Blue_Sky_Network or Office_Guest, would be a safer option.
Why can't I use special characters?
Some older devices (printers, CCTV cameras) may incorrectly display or fail to recognize networks with leading/trailing spaces or rare characters like <, >, and & in their names. It's best to use Latin characters, numbers, and hyphens.
Remember that changing your network name does not change your password. However, if you decide to change your password at the same time (which is recommended periodically), make sure you use a strong encryption standard. WPA2-PSK or WPA3, if the equipment allows.
Possible problems and their solutions
After changing the network name, users sometimes encounter problems with their devices not seeing the new network or being unable to connect. Most often, the problem lies in the cache of the gadget's wireless module. The phone or laptop "remembers" the old network and tries to find it, ignoring the new one with the same password but a different name.
The solution is simple: find the old network in the list of saved networks on your device and select "Forget Network." Then, search again, find a new name, and enter the password. If the problem persists, try rebooting the router itself. Rostelecom via the power button or web interface.
In rare cases, especially with older firmware versions, an IP address conflict or DHCP service freeze may occur after applying settings. In this case, a full reset of the router to factory settings will restore functionality, but you will have to re-enter your internet connection details (PPPoE login/password) if they weren't automatically saved in your provider profile.
Frequently Asked Questions (FAQ)
Is it possible to change the name of a Rostelecom Wi-Fi network without accessing the router?
No, you can only change the network name through the router settings (web interface) or through the official application. My Rostelecom, which is connected to the router. Changing the name is impossible without logging into the device.
Will the Internet disappear after changing the network name?
Internet access (global network access) won't be lost, and the router will continue to function. However, all your devices will lose their Wi-Fi connection, as the network with the old name will disappear. You'll have to reconnect to the network with the new name on each device.
What is the maximum number of characters that can be used in a title?
Standard IEEE 802.11 Allows up to 32 bytes in the network name (SSID). However, it is recommended to use no more than 15-20 Latin characters to ensure compatibility with all types of devices, including older appliances.
What should I do if I forgot the password for my router's web interface?
If standard admin/admin If they don't work, and you've changed your password and forgotten it, only a hard reset will help. To do this, press and hold the button Reset On the router body for about 10-15 seconds with the power on. After this, the device will return to factory settings.