Changing the name of your wireless network isn't just a whim, but a necessity for properly organizing your home's digital space. When you first receive your equipment from your provider, it typically comes with a standard factory designation, which often looks like a jumble of incomprehensible characters or includes the operator's logo. This creates confusion in apartment buildings, where neighboring networks with the same name can overlap, making it difficult to choose the right connection.
The procedure for renaming or changing a parameter SSID, is a basic setting available to users of all levels. By changing the name to something clear and unique, you'll not only make your network easier to find for new devices but also improve overall internet usage. Furthermore, this is the first step toward personalizing your infrastructure, allowing you to immediately distinguish your home internet from that of guests or neighbors.
In this article, we will examine in detail the process of changing the name for various router models provided by the company. Rostelecom. No matter what device you have installed - Sagemcom, Sercomm or more modern EltexThe setup principles remain similar, although the interface may differ slightly. We'll walk you through every step to eliminate any errors.
Preparing to set up network equipment
Before making any changes to your router configuration, you need to ensure a stable connection between your control device and the router itself. A wired connection is best. LAN cable, as it ensures that the connection won't be interrupted while saving new settings. If this isn't possible, make sure your laptop or smartphone has a reliable Wi-Fi signal from your current network.
To access the control panel, you will need to know the gateway's IP address. In most cases, the equipment Rostelecom this is the address 192.168.1.1 or 192.168.0.1This information is often duplicated on a sticker located on the bottom of the device. The login and password are also listed there, and by default, they are often set to admin or also indicated on the sticker.
⚠️ Note: If you change the network name while connected wirelessly, your device will lose connection to the router immediately after applying the settings. You'll need to re-find the network with the new name in the list of available networks and enter the password to reconnect.
Open any modern browser and enter the IP address in the address bar. The system will request authorization. After successfully entering your credentials, you will be taken to the main menu of the web interface. Interfaces may have different color schemes, but the operating logic remains the same for all models offered by the provider.
Login to the router's web interface
After entering the gateway address, you'll be taken to the authorization page. It's important to be careful here: if you've previously changed the administrator password and forgotten it, you'll need to perform a factory reset. For new or reset devices, the default settings often work flawlessly. For some models, Sagemcom And Sercomm The password can be unique for each device and printed on a label.
Interface of modern routers Rostelecom Often has a simplified and advanced display mode. To change the network name, you may need to switch to "Advanced Settings" or "Expert Mode." This will show all available tabs, including those hidden in the basic mode for beginners. Look for the gear button or toggle switch in the corner of the screen.
If the standard address 192.168.1.1 If it doesn't open, check your computer's network card settings. It should be on the same subnet as the router and receive an IP address automatically. DHCPAccess problems may also arise due to active VPN connections or proxy servers, which it is recommended to temporarily disable.
What should I do if the page doesn't load?
If your browser says "Unable to access the site," try clearing the cache or opening a tab in incognito mode. Also, make sure your antivirus isn't blocking access to local URLs. In rare cases, switching to the default browser, such as Edge or Chrome, can help.
Setting up Wi-Fi on Sagemcom and Sercomm routers
Models Sagemcom fast 2804, 3804 And Sercomm RV6699 are a classic for ISP subscribers. Their interface, although a bit dated, is highly functional. To change the network name, go to the tab usually labeled "Wi-Fi" or "Wireless Network." Within this section, we're interested in the "Basic Settings" or "SSID Setup" subsection.
In the field SSID (Service Set Identifier) contains the current name of your network. This is where you should enter your desired name. Use Latin characters, as some older devices may display Cyrillic characters incorrectly, showing gibberish instead of letters. The name length can vary, but it's best to keep it under 30 characters for maximum compatibility.
☑️ Checklist before saving settings
Don't forget to check your security settings, too. Next to the network name field is the encryption method selection. Make sure the protocol is selected. WPA2-PSK or WPA3, if the device supports it. This ensures that your network, with its new, attractive name, cannot be used by unauthorized parties for illegal activities.
After making changes, be sure to click "Save" or "Apply." The router may reboot the wireless module, which will take a few seconds. During this time, the internet connection on connected devices will be lost, but should soon reappear under the new name.
Changing SSID on Eltex devices and PON terminals
Modern optical terminals Eltex NTU-2 And Eltex NTU-4W have a more modern and user-friendly interface, often in blue and white. The setup logic is similar, but the layout of the elements may differ. Find the "Network" section and then select "WLAN" or "Wi-Fi."
In the menu that opens, you'll see a list of available radio modules if your router is dual-band. Each band (2.4 GHz and 5 GHz) requires a separate network name. You can name them the same for the function. Band Steering (smart switching) or add the prefix "_5G" to the high-speed band name to manually select the best connection.
| Parameter | Description | Recommended value |
|---|---|---|
| SSID Name | Wireless network name | Any unique Latin character |
| SSID Broadcast | Network visibility | Enabled |
| Security Mode | Type of protection | WPA2-PSK / WPA3 |
| Channel Width | Channel width | 20/40 MHz (Auto) |
It is important to note that in some firmware Eltex For Rostelecom Changing the network name may require confirmation via SMS or re-authorization if enhanced configuration protection is enabled. This is to prevent accidental changes by the subscriber.
Dual-band networks: 2.4 GHz and 5 GHz
Modern routers operate in two frequency ranges. Range 2.4 GHz has a longer range, but lower speed and is susceptible to interference from microwaves and Bluetooth devices. Range 5 GHz Provides high speed, but has poor wall penetration. When changing the network name, you can assign different names to these ranges.
It is recommended to give clear names to both ranges. For example, Home_WiFi_24 And Home_WiFi_5GThis will allow you to manually connect high-speed desktop devices (TVs, consoles) to the 5 GHz band, while leaving smart home devices (lamps, outlets), which often don't support 5 GHz, on the 2.4 GHz frequency.
⚠️ Note: Not all older devices "see" 5 GHz networks. If you rename the 5 GHz network and hide the 2.4 GHz network, older devices simply won't find the connection. Always keep at least one network visible and compatible with all devices.
There's a feature for combining networks under a single name, allowing the router to automatically decide which frequency to connect the client to. However, manually changing the name can cause this feature to fail or require separate activation in the advanced settings. If you want complete control, it's better to separate network names.
Connection issues after name change
After you change the network name, previously connected devices may attempt to connect to the old network, which no longer exists. They will show a "Connecting..." or "Obtaining IP address" status. In this case, you'll need to forget the old network on each device and enter the password for the new one.
Sometimes users encounter a situation where a new name doesn't appear in the list of available networks. This may be due to the network list being cached in the smartphone or laptop's operating system. Try restarting the client device or temporarily turning airplane mode on and off.
If the router "freezes" after applying the settings, which happens rarely, but is possible on older models SagemcomA forced reboot will help. Unplug the device for 10-15 seconds and then plug it back in. The boot process will take about 2-3 minutes, after which the new network should become active.
Safety and additional recommendations
A unique network name is great, but don't forget about security. Default passwords that aren't frequently changed during setup are a security hole. Passwords should be complex, contain mixed-case letters, numbers, and special characters. They should be at least 12 characters long.
Hiding your SSID is also worth mentioning. There's a "Hide SSID" option in the settings. If you enable it, your fancy new name won't show up in your neighbors' lists. However, this doesn't provide 100% protection, as professional sniffers will still see your activity, and you'll have to manually enter the network name on each new device.
Regularly check the list of connected clients in your router's web interface. If you see any unfamiliar devices, change your Wi-Fi password immediately. Changing the network name in conjunction with changing the password is the most effective way to "kick out" uninvited guests from your digital fortress.
Can I use emojis in my network name?
Technically, the standard allows for many symbols, but emoji may not display correctly on devices with different operating systems. Windows might show one symbol, while Android might show another or a square. It's best to limit yourself to letters and numbers.
Is it possible to change the network name through the Rostelecom app?
Yes, if your router supports remote management technology (TR-069) and is linked to your personal account. The Rostelecom or Home with Cloud mobile apps often have a "My Wi-Fi" section where you can change the name and password without logging into the web interface. However, the app's functionality may be limited compared to the full router settings.
Does the length of a network name affect network speed?
No, the SSID length does not affect data transfer speed or connection stability. The network name is transmitted in control frames, which take up a negligible portion of the channel's bandwidth. You can name your network as short as 30 characters, and the speed will remain the same.
What should I do if I forgot my router password after changing the settings?
If you've changed your router's administrator password and forgotten it, the only solution is a factory reset. There's a small hole marked "Reset" on the device's casing. Press it with a paperclip while the router is turned on and hold for 10-15 seconds. The router will reset to the factory name and password listed on the sticker.