Changing the name of a Wi-Fi network (or SSID) on the router from MGTS — a simple procedure that takes no more than 5 minutes. However, many users encounter difficulties: they can't find the necessary settings, confuse equipment models, or are afraid of breaking something. In fact, even if you've never accessed your router's control panel before, you'll have no problem with our instructions.
In this article we will look at all current methods network name changes for routers that provide MGTS in 2026: from the classics GPON ONT to modern times Keenetic And SagemcomWe'll also explain how to avoid common mistakes—for example, why devices don't connect to Wi-Fi after changing the SSID or why the name resets after a reboot.
If you rent equipment from a provider, it is important to remember that some models (for example, Sercomm RV6699) have limited settings in your personal account MGTSIn this case, you'll have to use alternative methods—read about them in the section on the mobile app and calling support.
And for those who want to not only change the network name but also improve its security, we've added a bonus: optimal Wi-Fi settings For MGTS, which protect against hacking and speed up the Internet.
1. How to find out the model of your MGTS router
Before changing the settings, you need to determine exactly what equipment you have installed. The model depends control panel interface, available features and even the login method. MGTS In 2026, several types of routers are used:
The most common ones are:
- 📡 GPON ONT (For example, Huawei HG8245H, ZTE F660) - optical terminals, often installed when connecting "Home Internet".
- 🖧 Keenetic (Giga, Extra, Viva) - universal routers with advanced settings.
- 🔄 Sagemcom (F@st 5364, F@st 5655) — are popular in tariffs with IPTV.
- 📶 Sercomm (RV6699) - budget models, often with limited functionality.
Where to see the model:
- On sticker on the back or bottom of the router (look for lines like
Model,Type). - IN MGTS personal account: "Hardware" or "My devices" section.
- Through mobile application MGTS: Personal Account (Internet tab).
If there is no sticker on your router or it has worn off, and the model is not displayed in your personal account, call MGTS support at 8 (495) 777-08-00 and clarify the contract information.
2. Method 1: Changing the Wi-Fi name via the router's web interface
This the most reliable method, which works for most models. You'll need a computer, laptop, or smartphone connected to the router's network (via cable or Wi-Fi).
Step-by-step instructions:
- Open your browser (Chrome, Firefox, Edge) and enter the router's IP address in the address bar. For MGTS this is usually:
192.168.1.1(For GPON ONT, Sagemcom)192.168.0.1(for some Keenetic)my.keenetic.net(alternative address for Keenetic)
- Enter your login and password. Standard login details:
Router model Login Password GPON ONT (Huawei, ZTE) adminoruseradminormtsKeenetic adminPassword from the sticker or 1234Sagemcom adminpasswordormtsSercomm RV6699 adminPassword from the MGTS contract If the default data doesn't work, it means the password has been changed. In this case, reset the router to factory settings (button
Resetfor 10 seconds). - Find the Wi-Fi sectionThe path depends on the model:
- 🔹 GPON ONT:
Network → WLAN → Basic - 🔹 Keenetic:
Wi-Fi Network → Access Point - 🔹 Sagemcom:
Wireless → Basic Settings
- 🔹 GPON ONT:
- Field
SSIDorNetwork name— enter a new name (up to 32 characters, without spaces or special characters). - For double frequency (2.4 GHz and 5 GHz) you will have to change both SSIDs separately.
- Save the settings (button
Apply,SaveorApply). - Reconnect the devices to the new Wi-Fi network.
- Download the app:
- Log in with your phone number MGTS.
- Go to the section
Internet → Wi-Fi Settings. - Click
Change network nameand enter the new SSID. - Save changes and reconnect the devices.
⚠️ Attention: If the router freezes or stops distributing internet after saving, wait 2-3 minutes—it may be rebooting. Do not unplug the router or press any buttons. Reset at this moment!
The new Wi-Fi name does not contain Cyrillic characters or emojis.
The network password must be at least 8 characters long.
The security type WPA2/WPA3 is selected
The "Enable SSID Broadcast" checkbox is checked.
3. Method 2: Changing the SSID via the MGTS mobile app
If you find the web interface inconvenient, you can change the Wi-Fi name using the official app. MGTS: Personal AccountThis method is suitable for most modern routers, except for older models. GPON ONT.
Instructions:
⚠️ Attention: The app doesn't always display all router settingsFor example, for Sercomm RV6699 You may only be able to change the password, not the network name. In this case, use the web interface or call support.
The advantages of this method:
- 🔐 No need to remember your router password – log in using your phone number.
- 📱 Conveniently change settings from your phone, without a computer.
- ⚡ Quickly apply changes (no need to manually reboot the router).
4. Method 3: Change the Wi-Fi name using the support phone number
If the first two methods don't work (for example, you have an outdated router model or don't have access to the settings), you can contact support MGTSOur specialists will change your network name remotely in 5-10 minutes.
How to do it:
- Call the number 8 (495) 777-08-00 (for Moscow) or 8 (800) 250-08-90 (free in Russia).
- Tell the operator what you want change SSID on your router.
- Name it equipment model (it can be found on the sticker or in the contract).
- Please confirm your name and phone number linked to the contract.
- Agree to temporarily disable Wi-Fi (usually for 1-2 minutes).
What will be required to confirm your identity:
- 📄 Contract number with MGTS (indicated in the paper version or in your personal account).
- 🔢 Passport details (if the contract is registered in your name).
- 📱 Code from SMS (will be sent to the number linked to the account).
⚠️ Attention: If the router is rented from MGTSA support specialist may refuse to change the SSID, citing "company policy." In this case, insist on technical feasibility or ask to be referred to a senior engineer.
What to do if the operator refuses to change the SSID?
If you were refused over the phone, try:
1. Contact MGTS office with a passport and a contract.
2. Write a complaint to support chat on the website mts.ru (sometimes the operators there are more loyal).
3. Threaten to terminate the contract - sometimes this works.
4. Buy your own router and connect it to the network MGTS in bridge mode (then you can change SSID without restrictions).
5. Optimal Wi-Fi settings for MGTS routers
In addition to changing the network name, we recommend setting up Wi-Fi so that it works fast and safeHere are the tested parameters for routers. MGTS:
Basic recommendations:
- 🔒 Security type:
WPA2-PSKorWPA3-PSK(never useWEPorOpen network!). - 🔄 Wi-Fi channel:
Autoor manually select the least loaded one (for example, 6th for 2.4 GHz). - 📶 Channel width:
20/40 MHzfor 2.4 GHz and80 MHzfor 5 GHz (if your devices support it). - 📡 Transmission power:
High(if the router is far from the devices) orAverage(if nearby).
Additional settings for advanced users:
| Parameter | Recommended value | Explanation |
|---|---|---|
| Hiding the SSID | Disabled | A hidden network does not protect against hacking, but it does make it more difficult to connect new devices. |
| Operating mode (802.11) | 802.11n/ac/ax (or Mixed) | Ensures compatibility with old and new devices. |
| MTU | 1500 | Optimal value for most networks MGTS. |
| DNS servers | 1.1.1.1 (Cloudflare) or 8.8.8.8 (Google) | Can speed up website loading compared to standard DNS from MGTS. |
⚠️ Attention: If you have connected IPTV from MGTS, do not disable the functionIGMP ProxyorMulticastin your router settings. This could result in TV loss!
6. Common mistakes and how to avoid them
Users often encounter problems when changing SSIDs. Here are the most common ones and how to solve them:
Problem 1: After changing the Wi-Fi name, devices do not connect
- 🔌 Cause: Old devices "remembered" the previous settings and do not see the new network.
- 🛠 Solution: On the phone/laptop Forget the network (in Wi-Fi settings) and reconnect.
Problem 2: Network name resets after router reboot
- 🔄 Cause: On some routers MGTS (For example, Sercomm RV6699) settings are reset due to firmware.
- 🛠 Solution: Update your router firmware or contact support to replace the hardware.
Problem 3: You cannot enter a Cyrillic network name
- 🆔 Cause: Some routers do not support Russian characters in SSID.
- 🛠 Solution: Use Latin letters, numbers or symbols
_(For example,Ivanov_WiFi).
Issue 4: There is no Wi-Fi section in the web interface
- 🔍 Cause: You have entered the wrong control panel (for example, the ONT terminal settings instead of the router).
- 🛠 Solution: Check your router's IP address in your personal account. MGTS or through the command
ipconfig(for Windows).
7. How to come up with a good name for a Wi-Fi network
Your network name is visible to all your neighbors, so it's worth being creative when choosing it. Here are a few ideas:
Classic options:
- 🏠
Ivanovs_2.4G/Ivanovs_5G(simple and clear). - 🔒
FBI Investigative Division(to scare away neighbors). - 😈
Virus_Vanya_999(a joke for IT specialists).
Topics for inspiration:
- 🎮 For gamers:
Lag_Free_Zone,Noob_Slayer_WiFi. - 🐶 For animal lovers:
Barsik_Kit_Awesome. - 🍕 For eaters:
WiFi_For_Pizza,Pelmeshki_Online.
What to avoid in a name:
- 🚫 Personal data (phone number, address, full name).
- 🚫 Insults or obscene words (may lead to complaints).
- 🚫 Too long names (more than 20 characters complicates connection).
⚠️ Attention: If you live in an apartment building, avoid names likeFREE_WIFIorMTS_Public- This may provoke your neighbors to try to connect to your network.
8. Frequently Asked Questions (FAQ)
Is it possible to change the Wi-Fi name on an MGTS router if it is rented?
Yes, but with some reservations. For most models (Keenetic, Sagemcom) you can change the SSID yourself. However, on some devices (for example, Sercomm RV6699) This feature may be blocked. In this case, please contact support. MGTS.
After changing the SSID, the internet stopped working. What should I do?
Most likely, the router is rebooting (this is normal and takes up to 3 minutes). If the internet still isn't back up after 5 minutes:
- Check if the indicator light is on
Interneton the router. - Reboot your router (turn off the power for 30 seconds).
- If it doesn't help, reset the settings to factory settings (button
Reset) and configure it again.
Is it possible to put emoji in the Wi-Fi name?
Technically yes, but we do not recommendSome devices (especially older smartphones or printers) cannot connect to a network with emojis in the SSID. If you really want to connect, use only standard symbols: ❤️, ☕, 🏡.
How do I restore my old Wi-Fi name if I forgot the new one?
There are two ways:
- Connect to the router via cable and go to the web interface (the IP address is usually
192.168.1.1). - Reset the router to factory settings (button
Resetfor 10 seconds) - then the standard SSID will return (for example,MTS_GPON_XXXX).
Do I need to change my Wi-Fi password along with my name?
Not necessarily, but we recommendIf you change your SSID because you suspect hacking or network slowness, change your password as well. Use a combination of 12+ characters with letters, numbers, and symbols (e.g., K0t_2026!Mts).