Modern laser MFP series 135wr HP's wireless networking products are compact devices that can significantly boost productivity in a small office or home. However, unlike their more advanced models, they often lack a full color display for menu navigation, which creates certain difficulties during initial wireless setup. Users are forced to use specific button combinations or temporarily connect a USB cable to activate the wireless module.
In this article, we will examine in detail all the available methods that will allow you to printer Become a full-fledged member of your local network. You'll learn how to avoid common mistakes related to router frequency ranges and how to properly install drivers so your computer can see your device wirelessly. Proper setup today will save you from printing issues tomorrow.
Before proceeding with the software part, you need to make sure that the physical connection was successful. Wireless module in the model HP Laser 135wr It's quite sensitive to interference, so proper device placement is crucial. It's also important to have your home network details ready, as in some cases, you'll need to manually enter your password.
Equipment preparation and compatibility testing
The first step before starting configuration is to check the compatibility of your router with printer requirements. Model 135wr, like many budget laser devices, only supports the 802.11 b/g/n standard in the 2.4 GHz band. This is critical, as modern dual-band routers often separate networks into 2.4 GHz and 5 GHz, assigning them different names or hiding one of them.
Make sure your smartphone or laptop you'll be using for setup is connected to a 2.4 GHz network. If you attempt to set up the printer via a 5 GHz network, the process will fail with a device detection error. In some cases, you may need to temporarily separate the network names (SSIDs) in your router settings to clearly identify the required frequency range.
⚠️ Important: Make sure AP Isolation is not enabled on your router. If this feature is enabled, devices connected via Wi-Fi will not be able to "see" each other, and printing from your computer will be impossible, even if the LEDs are green.
Place the MFP HP Laser 135wr Within a strong signal reception area. Laser units are sensitive to electromagnetic interference, so avoid placing the device close to microwave ovens or high-power power sources. The optimal distance from the router for initial setup is no more than 3-5 meters, with no physical obstacles.
Connection method via WPS (Wi-Fi Protected Setup)
The fastest way to establish communication between devices The best way to connect to a network is to use WPS technology. This method allows you to automatically transmit the network password without having to manually enter it on the printer, which is especially important for models without a screen. First, make sure your router supports this feature and has it enabled (usually a dedicated button on the router or an option in the web interface).
Press and hold the wireless button on the control panel HP Laser 135wr for 2-3 seconds until the indicator light starts flashing. Then, within two minutes, press the WPS button on your router. The synchronization process may take up to a minute, after which the Wi-Fi indicator on the printer should turn solid.
- 📶 The indicator is blinking: The device is trying to establish a connection or is waiting for confirmation from the router.
- ✅ The indicator is constantly on: The connection was successfully established and the IP address was obtained.
- ❌ Indicator off: The wireless module is disabled or a critical driver error has occurred.
If automatic connection doesn't occur the first time, try repeating the procedure, ensuring the time interval between button presses is minimal. Sometimes routers require more precise timing or requiring pairing mode to be enabled first through the administrator's web interface.
Setup via USB cable and HP Smart software
The most reliable and manufacturer-recommended method is to use the utility HP Smart or the classic driver installer with a temporary USB cable connection. This method ensures that all necessary network protocols are registered correctly, and driver will fit into the system correctly. You will need a USB 2.0 Type AB cable, which is often included.
Download the full software package from the official HP support website for your model. 135wrRun the installer and follow the on-screen instructions. When prompted to select a connection type, select "Wireless Connection" or "Wi-Fi." The installer will prompt you to connect a cable to transfer network settings.
☑️ Driver Installation Preparation Checklist
During installation, the program will copy your Wi-Fi network settings (SSID and password) from your computer to the printer. Once the data transfer is successful, the installer will prompt you to disconnect the USB cable. From this point on, HP Laser 135wr switches to network mode, and you can print from any device on the same network.
⚠️ Important: When using the USB cable method, do not disconnect the cable until the installer clearly indicates that the network settings have been successfully transferred. Disconnecting it prematurely may reset the configuration.
Manually configure IP address and network settings
In corporate networks or with complex router configurations, manual assignment may be required. IP addressesThis allows you to assign a printer to a specific address so that it doesn't get lost when the router reboots if the DHCP server decides to assign it a new address. To do this, you'll need to know your network's current gateway and subnet mask.
To find out the printer's current IP address (if it's already connected somehow) or to enter setup mode, the "print configuration" method is often used. Press and hold the Cancel button (the cross) on the panel. HP Laser 135wr within 5-10 seconds. The printer will print a report showing the current network parameters, including the MAC address and current IP.
If automatic address acquisition (DHCP) doesn't work, you can try using Wi-Fi Direct, which creates a direct access point from the printer. By connecting to a network with a name like HP-Print-xx-Laser 135wr, you can access the device's web interface (EWS) at 192.168.223.1 and set a static IP manually.
| Parameter | Description | Example of meaning |
|---|---|---|
| IP Address | A unique address on the network | 192.168.1.55 |
| Subnet Mask | Subnet mask | 255.255.255.0 |
| Gateway | Gateway (router) address | 192.168.1.1 |
| DNS Primary | Primary DNS server | 8.8.8.8 |
Where can I get a static IP?
Use an address from the same subnet as your router, but outside the DHCP range. For example, if your router assigns addresses from 100 to 200, assign the printer address 50.
Installing drivers and adding a device in Windows
After successful connection HP Laser 135wr If you connect to Wi-Fi, Windows may automatically detect the new device and attempt to install a universal driver. However, for all features, including scanning and toner monitoring, to be fully functional, installation is required. full-featured software.
Open Windows Settings, go to Devices → Printers & Scanners. Click Add a printer or scanner. If the system finds your HP Laser 135wr on the network, select it. If the search returns no results, click "The printer I want isn't listed" and choose to add it using the TCP/IP address you previously found or statically set.
When selecting a port, select "Create a new port" and type "Standard TCP/IP Port." Enter the IP address of your MFP. Windows will attempt to connect to the device. If a connection is established, the system will prompt you to select a driver. It's best to use the "Have Disk" button and specify the path to the previously downloaded HP driver files.
- 🖨️ Ready status: The device is available for printing documents.
- ⚠️ Attention Needed Status: Check for paper or toner, or the condition of the lids.
- 📡 Offline status: The computer does not see the printer on the network, check the IP addresses and firewall.
Mobile printing and solutions to common problems
Modern users often prefer printing from smartphones. For the model 135wr the technology is perfect Wi-Fi Direct and application HP Smart for iOS and Android. This allows you to print documents and photos even without an internet connection, using a direct connection between your phone and the printer.
If you're experiencing a situation where your computer can't see your printer, first check to see if the device's IP address has changed. On dynamic networks, the address can change after a long period of inactivity. Problems can also be caused by power saving settings: the printer may go to sleep and not wake up in time for a job.
A radical but effective solution to connection issues is to reset the printer's network settings. This typically requires pressing and holding a specific button combination (often the wireless button and the cancel button simultaneously) for 10-15 seconds until the lights begin flashing in a specific pattern.
⚠️ Note: Resetting network settings will delete all saved Wi-Fi passwords and IP configurations. You will need to reconnect to your wireless network.
Frequently Asked Questions (FAQ)
Can the HP Laser 135wr be connected to a 5GHz network?
No, this model only supports the 802.11 b/g/n standard in the 2.4 GHz frequency range. To connect, make sure your router broadcasts in this range and your computer or smartphone is also connected.
What should I do if the Wi-Fi indicator is blinking but not staying on?
A blinking light means the module is enabled, but a connection to the router has not been established. Check the password you entered, make sure the router isn't blocking the device by MAC address, and try moving the printer closer to the access point.
Is a USB cable required for continuous operation?
No, the USB cable is only required during the initial setup to transfer network settings. After successful configuration, the cable can be disconnected, and the printer will operate exclusively wirelessly.
How to find out the IP address of a printer without printing a report?
If the printer is already installed in Windows, open "Devices and Printers," right-click the HP Laser 135wr icon, and select "Properties" → the "Ports" tab. The device's IP address will be listed in the list of active ports.