How to connect the HP Laser 107WR printer to your phone via Wi-Fi: a complete guide

Printer HP Laser 107wr — a compact and functional device that can be used not only with a computer but also with a smartphone. Wi-Fi connectivity allows you to print documents, photos, and even scan directly from your mobile device. However, many users encounter difficulties setting up a wireless connection, especially if they are new to printers.

In this article, we will examine all connection methods in detail. HP Laser 107WR to phone via Wi-Fi, including the use of technology Wi-Fi Direct, applications HP Smart and manual setup via a router. You'll also learn how to diagnose and troubleshoot common errors that may arise during the process. The instructions are adapted for devices based on Android And iOS, taking into account the peculiarities of different versions of operating systems.

If you've already tried connecting your printer and encountered problems, don't rush to reset the settings. In 90% of cases, the solution is obvious: it could be an incorrect Wi-Fi mode, outdated printer firmware, or an IP address conflict. We'll help you sort this out step by step.

1. Preparing the HP Laser 107wr printer for connection

Before setting up Wi-Fi, make sure your printer is ready to use. This will save you from unnecessary hassle when connecting to your phone.

The first thing to do is turn on the printer and wait until it fully boots up. The Ready indicator on the control panel (usually a green or blue LED) should light up. If the printer is making unusual noises or flashing an error message, check:

• 📄 Paper in the tray (even if you don't plan to print right away, some functions require it).
• 🔋 Cartridge charge level (if the toner level is low, the printer may block network functions).
• 🔌 Connect to the power supply (use the original power supply if included).

Next, check if your printer has the latest firmware version. Outdated firmware can cause connection issues with modern smartphones. To update the firmware:

1. Download the latest version from official HP website (enter model) Laser 107wr in the search bar).
2. Connect the printer to your computer via USB and run the update file.
3. Follow the installation wizard instructions (the process usually takes 5-10 minutes).

The HP Laser 107wr only supports 2.4 GHz Wi-Fi networks.If your router operates in dual bands (2.4 GHz and 5 GHz), make sure your smartphone is connected to the 2.4 GHz network. Otherwise, the printer will not be able to detect the network.

2. Connection methods: Wi-Fi Direct vs. via a router

There are two main ways to connect HP Laser 107wr to the phone via Wi-Fi: via Wi-Fi Direct (direct connection) or through router (common network). Each method has its pros and cons.

Wi-Fi Direct This is convenient if you need to quickly print a document without access to a router (for example, on a business trip or in a cafe). However, this connection is less stable and requires reconnecting each time you use it. Suitable for Android And iOS, but on iPhone There may be restrictions due to Apple policy.

Connecting via a router It's more reliable and allows you to print from multiple devices simultaneously. This method is recommended for home or office use. The printer will always be available on the network, and you won't have to reconfigure the connection each time.

3. Connecting via Wi-Fi Direct (direct connection)

This method allows you to connect your phone and printer directly, without the need for a router. These instructions are suitable for devices with Android And iOS, but on iPhone additional actions may be required.

Step 1: Activate Wi-Fi Direct on the printer. To do this:

1. Click the button Wi-Fi on the printer control panel.
2. Hold it for 3 seconds until the indicator starts flashing.
3. The network name (SSID) and password for connection will appear on the printer display (if available) or on the printed sheet.

Step 2: Connect your phone to the printer network:

• 📱 On Android: go to Settings → Wi-Fi, find the network with the name DIRECT-xx-HP Laser 107wr (Where xx — unique characters) and connect by entering the password.
• 🍎 On iOS: go to Settings → Wi-Fi, select the printer's network. If the connection fails, try using the app HP Smart (more on this below).

Step 3: Start printing. Once connected, open a document or photo on your phone, select the print option, and select the printer. HP Laser 107wrIf the printer doesn't show up, refresh the device list or restart your phone.

What should I do if my iPhone can't see my printer via Wi-Fi Direct?

Apple devices have limitations when connecting to certain types of Wi-Fi Direct networks. In this case:

1. Install the application HP Smart from the App Store.

2. In the app, select the "Add Printer" option and follow the on-screen instructions.

3. If the printer is still not detected, try connecting via a router or using a USB-OTG adapter (for iPhone, you will need a Lightning-USB adapter + USB-A cable).

The printer is turned on and ready to print. | The phone is connected to the DIRECT-xx-HP Laser 107wr network. | Wi-Fi and Bluetooth are enabled on the phone (for some models). | The document is open in a supported app (Google Docs, Photos, Files, etc.).

4. Connecting via a router (shared Wi-Fi network)

This method is more versatile and suitable for regular use. The printer connects to your home or office Wi-Fi network, and you can print from any device connected to the same router.

Step 1: Prepare your network data. You will need:

• 📡 Network name (SSID).
• 🔐 Wi-Fi password.
• 📶 Security type (usually WPA2-PSK or WPA3).

Step 2: Set up your printer. There are two options:

1. Via the control panel:
   1. Click the button Wi-Fi on the printer.
   2. Hold it until the indicator starts flashing.
   3. The printer will begin searching for networks. Select your network from the list (use the buttons on the printer to navigate).
   4. Enter your password using the buttons (this may be inconvenient - see alternative below).
2. Via WPS (if the router supports it):
   1. Click the button WPS on the router (usually it is located on the back panel).
   2. Press and hold the button for 2 minutes Wi-Fi on the printer until the indicator light starts flashing faster.
   3. Wait until the printer is connected (the indicator light will be on continuously).

Step 3: Install the app HP Smart (available for Android And iOS). It will automatically find the printer on your network and offer to add it. If the printer isn't found:

• 🔄 Restart your router and printer.
• 📵 Make sure your phone and printer are connected to the same network.
• 🛠️ Check your router's firewall settings (sometimes it blocks new devices).

5. Set up printing via the HP Smart app

Application HP Smart Significantly simplifies printer operation, offering not only printing but also scanning, toner level checking, and troubleshooting. Download it for free:

• 🤖 Google Play for Android
• 🍎 App Store for iOS

After installation:

1. Open the app and tap Add a printer.
2. Select Setting up a new printer.
3. Follow the on-screen instructions. The app will automatically detect whether the printer is connected to the network and offer connection options.
4. If the printer is already online, select it from the list. If not, the app will help you set up Wi-Fi.

IN HP Smart Additional features available:

• 📷 Print photos from your gallery or cloud services (Google Drive, Dropbox).
• 📄 Scan documents directly to your phone (saved as PDF or JPG).
• 📊 Check printer status (toner level, errors).
• 🔧 Order consumables directly through the app.

If the application does not see the printer, try:

• 🔄 Restart the application and printer.
• 📵 Temporarily disable the VPN or firewall on your phone.
• 🛠️ Update the app to the latest version.

6. Solving common problems

Even with proper setup, errors can still occur. Let's look at common issues and how to resolve them.

⚠️ Attention: If the printer was previously connected to a different network, it may retain the old settings. In this case, reset the network settings: hold down the button Wi-Fi for 10 seconds until the indicator flashes 3 times.

Problem 1: The printer is not found on the network.

• 🔌 Check if Wi-Fi is enabled on the printer (the indicator should be on or flashing).
• 📡 Make sure your phone and printer are connected to the same network (for example, both are connected to MyHomeWiFi_2.4G).
• 🔄 Reboot your router (unplug it for 30 seconds).
• 🛠️ Disable this feature in your router settings Isolation of clients (if it is enabled, devices on the network cannot see each other).

Problem 2: Wi-Fi Direct connection is interrupted.

• 📱 On Android Disable the "Auto-connect" feature for other networks in your Wi-Fi settings.
• 🔋 Check your phone's battery level (if the battery is low, the system may disable power-consuming functions, including Wi-Fi Direct).
• 📶 Reduce the distance between your phone and the printer (maximum 5-7 meters).

Problem 3: When printing, the error "No connection to the printer" occurs.

• 🖨️ Check if the error indicator on the printer is flashing (e.g. red or orange light).
• 📵 Temporarily disable "Data Saver" or "Battery Saver" mode on your phone.
• 🔄 Reinstall the printer driver in the application HP Smart.

⚠️ Attention: Some routers (especially those with firmware from your ISP) may block new devices from connecting by default. If your printer won't connect, try temporarily disabling MAC address protection or adding the printer's MAC address to the list of allowed devices.

7. Alternative connection methods

If connecting via Wi-Fi fails, consider alternative options:

1. Connection via USB-OTG

To do this you will need:

• 📱 Android- phone with USB-OTG support.
• 🔌 Adapter USB-A → USB-C or USB-A → Micro-USB (depending on the phone connector).
• 🖨️ Cable USB-A → USB-B (included with the printer).

Connect the printer to your phone and select the print option in the desired application. iPhone an adapter will be required Lightning → USB-A and application HP Smart.

2. Printing via cloud services

If your printer is connected to the internet, you can print documents remotely:

• 🌐 Register your printer with the service HP ePrint (through HP Smart).
• 📧 Send the document to the printer's dedicated email address (format: printer@hpeprint.com).
• 🖨️ The printer will automatically print the file upon receiving the email.

3. Using third-party applications

If HP Smart doesn't work, try alternatives:

• 📱 PrinterShare (supports most printers including HP Laser 107wr).
• 🍎 Print Central Pro (For iOS, allows you to print from any application).

8. Optimizing printer operation with your phone

To avoid problems in the future, follow these guidelines:

1. Update your printer firmware

Check regularly for updates on official HP websiteNew firmware versions fix compatibility issues with modern smartphones.

2. Set up a static IP address for the printer

This will prevent connection loss when the router changes its IP address. To set a static IP address:

1. Go to your router's control panel (usually at 192.168.0.1 or 192.168.1.1).
2. Find the section DHCP → Address Reservation.
3. Add your printer to the list by specifying its MAC address (can be found on the sticker on the back of the printer or in HP Smart).
4. Assign a fixed IP (eg. 192.168.0.100).

3. Use a guest network for the printer

If you frequently have guests who need to print, set up a guest network on your router and connect the printer to it. This:

• 🔒 Protects the main network from unauthorized access.
• 📶 Allows guests to print without connecting to your main Wi-Fi.

4. Clear the app cache regularly HP Smart

On Android this can be done in Settings → Apps → HP Smart → Storage → Clear CacheOn . iOS delete and reinstall the application.

Frequently Asked Questions (FAQ)

Is it possible to connect HP Laser 107wr to a phone without Wi-Fi?

Yes, there are three alternative ways:

1. Through USB-OTG (phone adapter needed).
2. Through Bluetooth (if the printer supports it, but HP Laser 107wr (it doesn't have it).
3. Through cloud printing (sending a document to the printer's email).

The most reliable option without Wi-Fi is USB-OTG.

Why does the printer connect to Wi-Fi, but the phone doesn’t see it?

The reasons may be as follows:

• The phone and printer are connected to different networks (for example, a phone to 5 GHz, a printer to 2.4 GHz).
• It's enabled in the router client isolation (disable it in settings).
• It works on the phone VPN or firewall, blocking local connections.
• At the printer network settings are lost (Perform a reset by holding the Wi-Fi button for 10 seconds).

How to print a photo from a phone to an HP Laser 107wr?

Instructions for Android And iOS:

1. Open a photo in the gallery.
2. Click Share (or More on iOS).
3. Select Seal.
4. In the list of printers, specify HP Laser 107wr.
5. Adjust the settings (paper size, quality) and press Seal.

If the print option is missing, install HP Smart and select a photo through the app.

Is it possible to connect a printer to a phone via mobile Internet (4G/5G)?

No, not directly. Printer. HP Laser 107wr Doesn't support mobile network connectivity. However, there is a workaround:

1. Turn it on on your phone modem mode (Wi-Fi hotspot).
2. Connect the printer to this access point as if it were a regular Wi-Fi network.
3. You can now print from your phone, but please note that this will use up your mobile data.

This method is convenient for travel, but is not suitable for permanent use due to traffic restrictions.

How do I reset my printer's Wi-Fi settings?

To reset your printer to factory network settings:

1. Make sure the printer is turned on.
2. Find the button Wi-Fi on the control panel.
3. Press it on 10-15 seconds, until the indicator flashes 3 times.
4. The printer will restart and the Wi-Fi settings will be reset.

After the reset, you will need to set up your network connection again.