Modern multifunctional devices of the series HP Ink Tank 310 Allows you to forget about wires and enjoy the convenience of wireless printing. Many users encounter difficulties during initial setup, not knowing how to make the printer visible on the home network. Wireless connection Provides access to printing documents and photos directly from your smartphone or tablet without the need to connect a USB cable.
In this article, we'll cover all available Wi-Fi module activation methods in detail. You'll learn how to use the Wireless button on the control panel and how to configure the device through the app. HP Smart and what to do if the indicators are blinking in an unusual way. Correct network setup will ensure stable operation of the device in any room of your home or office.
Before starting any technical manipulations, it is worth making sure that the equipment is ready. Wireless router The printer must be turned on and broadcasting a signal. Make sure you know the password for your Wi-Fi network, as it will be required to authorize the printer in the security system.
⚠️ Attention: The HP Ink Tank 310 series only supports 2.4 GHz. If your router uses a 5 GHz network, the printer may not detect the signal. Make sure your router is in compatibility mode or has a dedicated 2.4 GHz network.
Preparing to set up a wireless connection
The first step is to properly prepare the printer itself. It's necessary to reset the previous network settings to avoid configuration conflicts. To do this, turn on the device and wait until the initialization process is complete, until all the lights stop flashing.
On the control panel, locate the button with an antenna or Wireless icon. Press and hold this button for 3-5 seconds until the Wireless indicator and the Power button begin flashing simultaneously. This will activate setup mode and launch Wireless Setup Wizard inside the device.
If the indicators are flashing, this means the printer has entered network search mode. The device is now ready to pair with a computer or mobile device. It's important that the router is within range of a strong signal at this point.
Using the HP Smart app for automation
The easiest and most reliable way to connect is to use proprietary software. HP SmartThis utility automatically finds your device in setup mode and shares your Wi-Fi network settings with it. You can download the app from the Microsoft Store, App Store, or Google Play.
After installing the app, launch it and click the "Add Printer" button or the "plus" icon. The program will scan the air and detect your printer. HP Ink Tank 310. Follow the on-screen instructions, selecting your home network from the list and entering the password.
During setup, the app may ask you to connect the printer to your computer or smartphone via USB cable to temporarily transfer network profiles. This is normal, and once complete, you can disconnect the cable.
☑️ Checklist for successful setup
It is worth noting that some features of the application may require you to create an account. HP AccountThis will allow you to receive notifications about low ink levels and order supplies directly.
WPS method: quick connection without password
If your router supports WPS (Wi-Fi Protected Setup), you can connect your printer without manually entering a password. This method significantly simplifies the process and minimizes the risk of typing errors.
Press the Wireless button on the printer to initiate search mode. Within two minutes, press the WPS button on your router. It's usually marked with a corresponding icon or text. After pressing it, the printer's LEDs should turn solid blue, indicating a successful connection.
This method is especially convenient if you don't have a USB cable or a mobile device with the app installed. However, if your router doesn't support WPS or the feature is disabled in its settings, you'll have to use other methods.
| Wireless indicator | Power indicator | Connection status |
|---|---|---|
| Flashing | It's on fire | Setup mode (ready to connect) |
| It's on fire | It's on fire | Successful connection to Wi-Fi |
| Turned off | It's on fire | The Wi-Fi module is turned off |
| Blinks slowly | It's on fire | Connection error or signal loss |
Setup via USB cable (classic method)
In some cases, automatic detection may fail, in which case the classic USB cable method comes to the rescue. You'll need to download the full driver and software package from the manufacturer's official website.
Run the installation file and select "Connect the printer wirelessly." The program will prompt you to connect the device to your computer via a cable. Once the printer is detected, the installation wizard will transfer the network settings to it.
Once you see a message indicating successful setup, you can disconnect the cable. The printer will save the settings and automatically connect to the network each time it is turned on. This is the most stable option. strong method for office environments where connection reliability is important.
What should I do if my computer doesn't see my printer via USB?
Make sure the cable is secure and firmly seated. Try using a different USB port, preferably one located directly on the motherboard (at the back of the system unit) rather than a USB hub. Also, check if the chipset driver for the USB controller is installed in Device Manager.
Wi-Fi Direct connection
Technology Wi-Fi Direct allows you to connect directly to the printer without using a router. This is ideal for printing documents from guests' smartphones or in situations where the main network is unavailable.
To activate this feature, press the Wi-Fi Direct button on the control panel (if available) or hold the Wireless button until the Wi-Fi Direct indicator lights up. Your printer's name will appear in the list of available networks on your smartphone screen, for example, HP-Print-xx-Ink Tank 310.
The connection password is usually printed on a technical information sticker or can be obtained by printing a configuration report. Once connected to this network, you will be able to print documents, but the printer will not have internet access.
Diagnostics and troubleshooting
Even with proper setup, problems may still occur. If the wireless indicator is blinking, it means the printer can't connect to the router. Check to see if the Wi-Fi password has changed or if MAC address filtering is enabled on the router.
Sometimes a simple hardware restart helps. Turn off the router, printer, and computer. Turn on the router and wait for it to fully boot up, then turn on the printer. This often resolves IP address assignment issues.
⚠️ Attention: Antivirus programs and firewalls on your computer may block the installation of a network printer. It is recommended to temporarily disable third-party security solutions during setup.
If all else fails, reset your network settings. Press and hold the Wireless and Cancel buttons simultaneously for 3 seconds. This will reset the network module to factory settings, after which you'll need to repeat the setup process.
Printing a network configuration report
For detailed information on the current connection status, you can print a report. Click the "Resume/Cancel" button or the key combination specified in the instructions to obtain a technical data sheet.
The report will show the printer's IP address, MAC address, network name (SSID), and connection status. This information is extremely useful when manually installing drivers or setting up a static IP address.
The presence of a valid IP address (not 0.0.0.0 or 169.xxx) indicates that the printer has successfully received an address from the router's DHCP server and is ready to work on the network.
How to find out the IP address of a printer without printing a report?
The IP address can be found in the HP Smart app under the printer information section. It can also be found in the list of connected devices in your router's interface (usually by the MAC address). In Windows, the address is displayed in the device properties under "Devices and Printers."
Can the HP Ink Tank 310 be connected to a hidden network?
Connecting to a hidden network (SSID not broadcast) is possible, but requires manually entering the network name through the HP Smart app or web interface (EWS), as the printer will not be able to find it automatically when scanning.
What should I do if the printer sees the network but doesn't connect?
Check your network security type. HP Ink Tank 310 printers may not support the new WPA3 encryption standards. Try switching your router to WPA2/WPA Mixed compatibility mode. Also, make sure AP client isolation is not enabled on your router.
Do Wi-Fi settings reset when the printer is turned off?
No, the settings are stored in the device's non-volatile memory. They are only reset when performing a full network reset or resetting all printer settings to factory defaults.
Does the 310 series support cloud printing?
Yes, once you're connected to Wi-Fi and registered with HP Smart, cloud printing features become available, allowing you to send documents to your printer from anywhere in the world with internet access.