Mobile devices have long ceased to be simply a means of communication, having become full-fledged control centers for the digital environment. Smartphone owners Honor often face the need to share internet access with other devices, whether it's a colleague's laptop or a friend's tablet. This feature is known as "Hosting" or Wi-Fi hotspot, allows you to broadcast 4G or 5G mobile traffic, creating a local wireless network around you.
In this article, we will examine in detail the process of activating the modem mode on the model Honor 10You'll learn not only basic activation methods but also advanced security settings that will protect your data from unauthorized access. Understanding how it works WPA2-PSK Encryption will help prevent traffic interception in public places.
Sometimes standard methods can fail, and that's when advanced settings or alternative connection methods come to the rescue. We'll look at options for sharing the internet via USB and Bluetooth, which is especially useful for older laptops without Wi-Fi modules or for saving battery life. Being prepared for a variety of scenarios is the key to stable operation in any situation.
⚠️ Note: EMUI interfaces may vary slightly depending on the firmware version and device region. If you don't see the menu item, check for system updates in Settings.
Quick activation via the control panel
The easiest and fastest way to start distributing the Internet on Honor 10 — Using the notification shade. This method doesn't require diving deep into the system menu and allows you to enable the module in a couple of seconds. Simply swipe down from the top of the screen to reveal the quick toggles panel.
Among the many icons, find the one labeled "Hot Spot" or with a radar-like symbol. Tapping it will instantly activate the feature. If the icon isn't visible on the screen, pull the shade down again or tap the edit button to add the shortcut to the active area.
However, this method doesn't allow you to immediately change security settings or the network name. It's ideal for situations where you urgently need to send a file or check email on another device using pre-configured settings. For initial setup, it's still recommended to access the full menu.
Setting up an access point in the smartphone menu
To create a secure and stable network, you need to go to the main system settings. Here you can set the network name (SSID) and a complex password that will be difficult for attackers to guess. The path to the desired section usually looks like this Settings → Wireless & networks → Wi-Fi hotspot.
In the window that opens, click "Wi-Fi hotspot settings." This is where you configure the basic signal broadcasting parameters. Pay attention to the frequency range: choosing between 2.4 GHz and 5 GHz can significantly impact the speed and range of the signal.
- 📡 2.4 GHz band: Provides greater coverage and compatibility with older devices, but has lower speeds.
- 🚀 5 GHz band: guarantees high data transfer speed, but the signal range is shorter and it penetrates walls worse.
- 🔒 Encryption type: Always choose WPA2 PSK, as it is the most secure security standard currently available.
Remember to change your password regularly, especially if you frequently use public transportation. It's best to replace the default passwords generated by the system upon first launch with a unique character combination. This will minimize the risk of unauthorized access to your traffic.
☑️ Check security settings
Advanced settings and traffic limits
shell EMUI, installed on Honor 10, provides users with powerful tools to control their data usage. In the hotspot menu, you can find the "Traffic Limit" option. This feature allows you to set a data limit, after which internet tethering will automatically stop.
This precaution will protect you from unexpected bills from your mobile operator if your plan has a gigabyte limit. You can set the limit to 1 GB, 5 GB, or any other value that suits your budget. The system will notify you when the limit is about to be reached.
A list of connected devices is also available in the advanced settings. It displays the MAC addresses and names of devices currently using your internet connection. You can manually block any suspicious device without even changing your Wi-Fi network password.
⚠️ Warning: Setting the traffic limit too low may interrupt downloads of large files on the connected device. Please allow for a reasonable amount of bandwidth, as operating systems may consume background data for updates.
What is MAC filtering?
MAC filtering is a network access control method based on the unique physical address of a device's network interface. Unlike a password, which can be shared with others, the MAC address is hardcoded into the device's hardware. You can create a whitelist in the Honor 10 settings, allowing access only to trusted devices, even if the Wi-Fi password is known to others.
Alternative ways to distribute Internet
A wireless connection isn't always the best solution. In some cases, a wired connection via USB cable is preferable. This provides a more stable signal and lower latency.ping) and simultaneously charges the smartphone, which is critical for long-term operation.
To activate USB modem, connect your phone to your computer using a cable, then go to the hotspot settings menu. There you'll find the "USB modem" option, which will only become active once a cable connection is detected. The computer will recognize the phone as a network card and automatically install the necessary drivers.
Another option is Bluetooth sharing. This method is significantly slower than Wi-Fi and USB, but it uses less power and is suitable for transferring small amounts of data or working with text applications. Pairing devices takes longer, but the connection is stable.
| Parameter | Wi-Fi Hotspot | USB modem | Bluetooth PAN |
|---|---|---|---|
| Speed | High (up to 150 Mbps) | Maximum (depending on 4G/5G) | Low (up to 2-3 Mbps) |
| Battery consumption | High | Charging the device | Average |
| Number of clients | Up to 8-10 devices | 1 device | Up to 5 devices |
| Stability | Average (depending on interference) | High | Average |
Troubleshooting connection issues
Users may encounter a situation where other devices cannot see the network or connect to it. Often, the problem lies in incompatible security standards or frequency bands. If the laptop is older, it may not support the 5 GHz band or protocol. WPA3.
Another common cause is that the list of connected clients is full. By default Honor 10 may limit the number of simultaneous connections. Check your settings and increase the limit if you plan to connect multiple devices simultaneously.
Sometimes, simply restarting the network settings service helps. To do this, you can turn on airplane mode for 10 seconds and then turn it off. This will force the phone to re-register with the carrier's network and update the IP addresses.
If the problem persists, try resetting your network settings. This will reset all Wi-Fi, Bluetooth, and mobile data settings to factory defaults. Don't worry, your personal files and contacts won't be affected, but you'll have to re-enter saved Wi-Fi passwords.
Optimizing power consumption when the modem is running
Hotspot mode is one of the most power-hungry processes in a smartphone. The radio module operates at increased power, constantly transmitting data and maintaining a connection with the base station and clients. Screen Honor 10 may also consume resources if enabled.
To extend battery life, we recommend turning off the screen immediately after setting up the connection. It's also a good idea to close background apps on your phone, as they may be actively using the internet, putting additional strain on the processor and modem.
Using power-saving mode can limit background activity, but it can sometimes also impact access point performance by lowering the priority of network processes. If you need maximum stability, it's best to disable power-saving mode during a networking session.
An external battery will be a great helper on long trips. By connecting Power Bank, you won't have to worry about your smartphone running out of battery, ensuring continuous network access for all your devices throughout the day.
How do I know who is connected to my Wi-Fi on my Honor 10?
To see the list of connected devices, go to Settings → Wireless & networks → Wi-Fi hotspot → Connected devicesThis section displays all active clients. You can click on a specific device to view its details or block access without changing the overall network password.
Why doesn't the Honor 10 distribute Wi-Fi, even though mobile internet works?
Most often, the problem lies in your mobile operator's APN (Access Point Name) settings. If the APN profile doesn't contain the correct tethering parameters (sometimes operators block this at the network level), the internet on connected devices won't work. Try resetting your APN settings to default or creating a new profile with your operator's details.
Is it possible to share Wi-Fi via USB on an iPhone?
Directly sharing Wi-Fi from an Android (Honor) device to an iPhone via a USB cable using standard methods is not possible. The iPhone requires specific drivers and settings that Android doesn't provide out of the box. However, the reverse approach (sharing from an iPhone to a PC) works. For an Android smartphone, it's better to use a Bluetooth modem or a traditional Wi-Fi hotspot to connect to iOS.