Modern TVs and multimedia set-top boxes from a Turkish brand Beko equipped with functional modules Smart TV, which require stable internet access to function properly. Without an internet connection, it's impossible to use online movie theaters, update operating system firmware, or use screen mirroring from a smartphone. Activating a wireless connection typically takes only a few minutes if you follow the correct steps in the device's menu.
Owners of televisions often encounter various setup nuances related to operating system versions, which may differ on different TV models. In some cases, the platform used Android TV, in others - proprietary shells or systems based on LinuxRegardless of the installed platform, the basic algorithm for searching and pairing with a router remains similar, requiring only careful attention when entering the password.
Before you begin setup, make sure your router is working properly and is transmitting a signal, and that your TV is within a strong reception area. If the device is located too far from the access point, the connection speed may not be sufficient for playing high-definition video. HD or 4KIn such situations, it is recommended to use a wired connection or purchase an additional Wi-Fi adapter if the built-in module is unstable.
Checking compatibility and preparing equipment
The first step before setting up is a visual inspection of the remote control and the TV interface. The remote should have a button. Smart, Home or a globe icon that opens the main smart features menu. If you don't see this button, your model may require an external USB adapter, although most modern devices do. Beko already have built-in Wi-Fi module.
It's also important to know the security standards your router supports. TVs may not see the network or refuse to connect if the router uses outdated or, conversely, very new encryption protocols that aren't supported by the TV's chipset. Mixed mode is usually the best choice. WPA/WPA2.
⚠️ Attention: If you're using a dual-band router, make sure your TV and smartphone (if you plan to control them) are on the same network. Some older models Beko do not support the 5 GHz frequency and only see 2.4 GHz networks.
For successful authorization you will need to know the exact network name (SSID) and a password. The password is case-sensitive, so be extremely careful when entering it using the on-screen keyboard. It's recommended to write down complex characters on a piece of paper beforehand to avoid typing errors using the remote control buttons.
Step-by-step instructions for connecting via the menu
The setup process begins by turning on the TV and going to the main menu. Using the remote, find the section responsible for system settings. Depending on the model, it may be called Settings, Settings or indicated by a gear. Within this section, you need to find the tab related to network connections.
Next, you need to select the connection type. Since we are interested in a wireless method, we select Net or Network, and then Wireless network (Wireless). Once this mode is activated, the TV will scan the airwaves to find available access points within range.
☑️ Beko Smart TV connection algorithm
When the list of networks appears on the screen, find the name of your router. Select it with the confirmation button and press OK or EnterIf the network is hidden, you'll need to select the manual configuration option and enter the SSID manually. After selecting the network, a password entry window will open.
- 📡 Use the on-screen keyboard to enter password characters, switching between numbers and letters with a dedicated button.
- 🔒 Make sure that the screen displays asterisks or dots to hide the characters so that no one can see the access code.
- ✅ After entering your password, click the "Connect" or "Done" button to begin the authorization process.
If the password is correct, the TV will attempt to obtain an IP address automatically. This process typically takes no more than 10-15 seconds. Once complete, a successful connection message will appear on the screen, and the signal indicator will light next to the network name.
Configuring network settings manually
In some cases, automatic retrieval of settings (DHCP) may not work due to router configuration or ISP restrictions. In this case, you will need to manually configure the IP address. To do this, select the option in the network menu Advanced settings or Advanced Settings.
In the menu that opens, you'll need to disable automatic mode and enter your static IP address. This information can usually be found on the router's sticker or in your provider's documentation. The key fields to fill out are the IP address, subnet mask, gateway, and DNS servers.
| Parameter | Example of meaning | Description |
|---|---|---|
| IP address | 192.168.1.150 | Unique address of the TV on the local network |
| Subnet mask | 255.255.255.0 | Determines the size of the local network |
| Gateway | 192.168.1.1 | Your router's address |
| DNS server 1 | 8.8.8.8 | Google's server address for translating domain names |
Particular attention should be paid to the field DNSProblems with loading Smart TV apps often arise due to a slow or blocked DNS provider. Replacing the default addresses with Google's public servers (8.8.8.8) or CloudFlare (1.1.1.1) often solves the "no internet" problem when Wi-Fi is working.
Why change DNS on TV?
ISPs sometimes block access to certain update servers or content platforms. Changing your DNS to an alternative one allows you to bypass these restrictions and improve Smart TV interface response.
Solving common connection problems
Even with the correct data entry, users may encounter a situation where the TV sees the network but doesn't connect, or the connection is there but apps don't work. One common cause is a malfunction in the TV's network stack. Beko.
Try a full reset of network settings. In the network menu, find the item Network reset or Network ResetThis action will delete all saved passwords and configurations, resetting the Wi-Fi module to its factory default settings. After rebooting, try connecting again.
- 🔄 Reboot your router: unplug it from the power outlet for 30 seconds, then plug it back in and wait until it fully boots up.
- 📶 Change the broadcast channel: If your network is overloaded with neighbors, switch your router to channel 1, 6, or 11 in the 2.4 GHz settings.
- 🔌 Check the date and time: An incorrect system date on your TV can block a secure HTTPS connection to servers.
⚠️ Attention: The menu interface and item names may vary depending on the model year and software version. If you don't see the options described, consult the official user manual for your specific model.
If the problem persists, it may be due to incompatibility of encryption standards. Try temporarily changing the security type on your router to WPA2-PSK (AES), as it is the most universal standard supported by almost all devices.
Using Wi-Fi adapters and alternative methods
For TV models BekoFor devices without a built-in wireless module, or to improve signal reception, you can use external USB adapters. It's important to understand that not just any adapter will work, only those that are specifically marked or certified by the manufacturer.
Compatible adapters usually have specific chipset identifiers (for example, Ralink or Mediatek). When purchasing equipment at an electronics store, be sure to check compatibility with your TV model. Connect to a USB port, after which you can select a wireless network from the menu.
An alternative method is to share your internet connection from your smartphone. You can enable tethering on your phone and connect to it, but this quickly drains your mobile data plan and battery. This method is good as a temporary solution for downloading updates.
Updating software via the network
After successfully connecting to the internet, it is highly recommended to check for updates to your TV system. Manufacturers regularly release patches that improve Wi-Fi module stability and fix app bugs.
To check for updates, go to the section Support or About the device in the settings menu. Select the item Software update and press Search for updatesThe TV will connect to the server. Beko and, if a new version is available, it will offer to install it.
The update process may take 5 to 20 minutes depending on your internet speed and file size. During this time, the screen may go blank or display the brand logo. Do not unplug the TV until the process is complete and automatically reboots.
Diagnosing wireless signal quality
The quality of online content playback directly depends on the signal strength. Most TVs have a network menu Beko There's a function to display signal strength as a scale or percentage. A level above 70% is considered optimal.
If the signal is weak, the video will constantly buffer, and the image may appear blocky. Reception degradation is often caused by metal wall structures, microwave ovens, or other sources of radiation operating at the 2.4 GHz frequency.
To improve the situation, try relocating your router, elevating it higher or moving it away from other electronic devices. You can also consider installing a repeater (signal booster) to extend the wireless coverage in the TV room.
What should I do if my TV stops seeing the network after a power outage?
After a power surge, your router's settings may have been reset to factory defaults, or the broadcast channel may have changed. Try resetting your TV's network settings and rescanning the airwaves. Also, check if MAC address filtering has been enabled on your router, which could have blocked your device.
Is it possible to connect a Beko TV to a hidden network (Hidden SSID)?
Yes, this is possible. In the network selection menu, select "Add a hidden network" or "Enter manually." You will need to know the exact network name (SSID), security type (usually WPA2), and password. Automatic search will not work in this case.
Why do apps work but the browser won't open pages?
This is a classic sign of DNS server issues. System applications may use their own hardcoded addresses, while the browser relies on the default network settings. Try setting a static DNS (8.8.8.8) in your connection settings.
How can I find my TV's MAC address for router filtering?
The MAC address is usually displayed in the "About TV" -> "Information" section or directly in the network settings menu next to the connection status. It is formatted as six pairs of hexadecimal numbers, for example, 00:1A:2B:3C:4D:5E.