Where and how to enable Wi-Fi on an LG Smart TV: instructions for all models

• 🔠 On Magic Remote You can enter text by voice (microphone button).
• 📱 Connect the keyboard via Bluetooth (in the menu Devices → Keyboard).
• Confirm connectionThe TV will show the status. Connected and IP address.

If an error appears after entering the password Failed to connect, check: Security type in the router settings (recommended) WPA2-PSK or WPA3). Televisions LG older than 2020 may not be supported WPA3.

3. Alternative ways to enable Wi-Fi

If the standard menu path doesn't work (for example, due to a firmware glitch), try alternative methods:

Method 1: Using the Magic Remote

On the remote controls Magic Remote (comes with 2021 and newer models) yes hot keys for quick access to the network:

1. Press and hold the button Home (house) for 3 seconds.
2. In the menu that appears, select Net (antenna icon).
3. Activate Wi-Fi and select a network.

Method 2: Using the LG ThinQ mobile app

Application LG ThinQ (available for Android And iOS) allows you to control your TV remotely, including network setup:

1. Connect your phone to the same Wi-Fi network you want to connect your TV to.
2. Open LG ThinQ, select your TV from the list of devices.
3. Go to Settings → Network and follow the instructions on the screen.
What should I do if the app doesn't find my TV?

Make sure your TV and phone are connected to the same Wi-Fi network (even if there is no internet).

Turn on Bluetooth on your TV (Settings → Devices → Bluetooth).

Update the application LG ThinQ to the latest version.

Restart your TV (unplug for 1 minute).

Method 3: Through the service menu (for advanced users)

If Wi-Fi does not turn on due to a software glitch, you can reset the network settings via service menu. This method should only be used as a last resort, as it resets all custom settings on the TV.

1. Turn off your TV, then press and hold on the remote Settings (gear).
2. Without releasing the button, turn on the TV with the button Nutrition.
3. In the service menu, select Option → Network Reset.

⚠️ Note: Resetting network settings will delete all saved Wi-Fi passwords and data about connected devices (such as soundbars or game consoles).

4. Troubleshooting Wi-Fi connection issues

If the TV LG Smart TV If your TV won't connect to Wi-Fi, the problem could be either with the TV or the router. Let's look at typical scenarios and how to fix them:

Problem	Possible cause	Solution
The TV doesn't see Wi-Fi networks.	The Wi-Fi module on the TV or router is disabled.	Check your router settings (enable SSID broadcasting). Enable Wi-Fi on your TV in the menu. Net.
Error "Failed to connect"	Incorrect password or security type	Make sure you entered the password correctly. Set it in the router. WPA2-PSK (Not WPA3 for older models).
Weak signal or connection interruptions	Long distance to the router or interference	Move the router closer to the TV or use a Wi-Fi extender. Switch to the 2.4 GHz channel (less susceptible to interference).
The TV connects, but there is no internet.	Problems with your provider or incorrect IP settings	Restart your router. In your TV settings, set Obtain an IP automatically (DHCP).

If the TV LG I was previously connected to Wi-Fi, but after updating the firmware it stopped seeing networks. Try this:

1. Reset network settings (Settings → Network → Network Reset).
2. Update your TV's firmware manually via USB (instructions on the website) LG).
3. Roll back the firmware to the previous version (for advanced users only!).

⚠️ Warning: On TVs LG OLED 2022–2026 (webOS 7.0+) After resetting the settings, you may need to reactivate licenses for streaming services (for example, Netflix or Disney+). Save your account details in advance.

5. Setting up Wi-Fi on older LG models (2016–2019)

Televisions LG 2016–2019 (for example, series UJ630V, SK8500) work on webOS 3.0–4.5, where the network settings interface differs. Here's how to enable Wi-Fi on these models:

1. Click the button Settings on the remote control and select All settings.
2. Go to Network → Connect to Wi-Fi.
3. Turn on Wi-Fi using the slider or button OK.
4. Select the network from the list and enter the password. On older models, the keyboard may take 5-10 seconds to open.

Features of old TVs LG:

• 🐢 Slow network scanning (may take up to 1 minute).
• 🔒 Not supported WPA3 and modern standards Wi-Fi 6.
• 📶 They may not see networks in the 5 GHz range (only 2.4 GHz).

If your TV LG 2016–2017 year of release (for example, LH604V) does not connect to Wi-Fi despite the correct settings, check:

• 🔌 Is the TV receiving a stable power supply (problems with the power supply can affect the operation of the Wi-Fi module).
• 📡 Is there any interference from other devices (microwaves, cordless phones).
• 🔄 Is a factory reset required? (Settings → General → Factory Reset).

6. Optimize Wi-Fi for streaming and gaming

After connecting to Wi-Fi, it is important to configure the network for comfortable viewing of videos in 4K or online games (for example, through GeForce NOW or Xbox Cloud Gaming). Here are the key recommendations:

To view 4K HDR

• 📶 Use range 5 GHz (if the TV supports it).
• 🔗 Connect your TV to your router via Wi-Fi Mesh (if the distance is more than 10 meters).
• 📊 Set the traffic priority in your router settings (QoS) for TV by MAC address.

For online games

• 🎮 Turn on the mode Game in the TV settings (Settings → Picture → Picture modes).
• 🔄 Turn off Wi-Fi power saving mode (Settings → Network → Advanced → Power Saving Mode).
• 📡 Set a fixed channel on your router 5 GHz (for example, 36 or 40) instead Auto.

To check the connection speed on your TV LG:

1. Open Settings → Network → Network Status.
2. Click Check your internet connection.
3. The TV will show the download/upload speed. For 4K at least is required 25 Mbps.

⚠️ Warning: On TVs LG With webOS 6.0 and newer built-in speed test can underestimate results by 10-15% compared to computer services like Speedtest.netFor accurate measurements, use external devices.

7. Common mistakes and how to avoid them

When setting up Wi-Fi on LG Smart TV Users often make mistakes that lead to connection issues. Here are the most common ones and how to prevent them:

• ❌ Using special characters in your Wi-Fi password (For example, #$, %). Televisions LG may not process such passwords correctly.

  Solution: Change the password on your router using only Latin letters and numbers.

• ❌ Connecting to a guest networkMany routers limit the speed of guest devices, which leads to lag when streaming.

  Solution: Connect your TV to your main Wi-Fi network.

• ❌ Ignoring firmware updatesOutdated software may contain compatibility issues with modern routers.

  Solution: Check back regularly for updates Settings → Support → Software Update.

• ❌ Placing the router near sources of interference (microwaves, cordless phones).

  Solution: Move the router at least 1 meter away from other electronic devices.

Another typical problem is The TV connects to Wi-Fi but won't open apps. (For example, YouTube or Prime Video). Reasons:

• 🔒 DNS blocking by your ISP (try using 8.8.8.8 or 1.1.1.1 in the TV network settings).
• 📅 Incorrect date/time on TV (check in Settings → General → Date and Time).
• 🔄 IP address conflict (reset network settings or reboot the router).

FAQ: Answers to frequently asked questions

My LG Smart TV can't detect Wi-Fi after a firmware update. What should I do?

Reset your TV's network settings (Settings → Network → Network Reset) and reboot the router. If the problem persists, roll back the firmware to the previous version via LG official website (Rollback instructions are available in the support section for your model).

Is it possible to connect an LG Smart TV to Wi-Fi without a remote?
Yes, there are three ways:
1. Use mobile application LG ThinQ (connect your phone to the same network as your TV).
2. Connect keyboard or mouse via USB/Bluetooth and control the menu through them.
3. On some models, you can turn on Wi-Fi buttons on the body (press Volume Down + Channel Down for 5 seconds to enter the service menu).
My LG TV connects to Wi-Fi, but the internet isn't working. What's wrong?

Please check the following points:

• 🌍 Make sure your TV's network settings are set correctly DNS (try it 8.8.8.8).
• 🔌 Restart the router and TV (disconnect from power for 1 minute).
• 📡 Check if it is enabled on your router Client isolation mode (turn it off).
• 🔒 Make sure your router doesn't have any MAC address restrictions for your TV.

If the problem persists, try connecting your TV to the Internet via an Ethernet cable to rule out problems with the Wi-Fi module.

How do I find the MAC address of my LG Smart TV's Wi-Fi module?

The MAC address is needed to connect the TV to the router or set up filtering. To find it:

1. Open Settings → Network → Network Status.
2. Scroll down to the section Connection information.
3. The MAC address will be listed in the line Wi-Fi MAC or MAC address.

On some models, the MAC address is also duplicated on a sticker on the back of the TV (next to the serial number).

Can I use a USB Wi-Fi adapter with LG Smart TV?
Televisions LG Smart TV do not support External USB Wi-Fi adapters. The Wi-Fi module is built into the motherboard and can only be replaced at a service center. If the built-in Wi-Fi doesn't work, alternatives include:
• 🔌 Connect your TV to your router via Ethernet cable.
• 📶 Use Powerline adapters (Internet transmission via electrical wiring).
• 🔄 Replace your router with a model with a stronger signal (for example, with support Wi-Fi 6).