Ecosystem users Xiaomi We often encounter situations where we need to change wireless network settings or reconnect a device after replacing a router. The question is, where exactly in the interface is this? Mi Home Hiding Wi-Fi controls is due to the app's specific operating logic. It doesn't have a global "Wi-Fi Settings" menu for the smartphone itself, as it focuses on managing peripherals.
It is important to understand that Mi Home It functions as a remote control, not as your phone's network controller. All network interactions occur within the context of the specific connected device or when activating a new device for the first time. If you're trying to figure out where the signal has disappeared or how to switch a lamp to a different frequency, you'll need to access the specific device's menu.
In this article, we'll take a detailed look at the menu architecture, access hidden settings, and action algorithms for various scenarios. You'll learn how to correctly pair devices to a new access point and troubleshoot common connection errors. Careful adherence to the instructions will help avoid device blocking and data loss.
The logic of the application and the lack of global network settings
Many newbies mistakenly believe that the app has a single Wi-Fi switch, similar to the one found in the Android or iOS notification shade. However, the architecture Smart Home It's structured differently. The app uses your phone's existing connection to the router to transmit commands to smart devices. Therefore, looking for an equivalent to your phone's system wireless settings here is pointless.
Managing network settings in Mi Home tied to each specific device. This is done for security and ease of system scalability. If you have ten light bulbs and five outlets in your home, each one may have its own connection nuances, especially if some are connected through a gateway and others directly. Localization of settings allows you to avoid configuration conflicts.
⚠️ Important: Don't try to find Wi-Fi settings in your general account profile. It only stores information about your region, app version, and voice assistant connections, not your network settings.
When you change your router or Wi-Fi password, the app doesn't automatically switch devices. You'll need to reactivate each device that can't save old encryption keys or hasn't received updated data from the cloud. This is standard behavior for most IoT platforms.
Where to find Wi-Fi settings for a specific device
To access network settings, open the device's control panel. This is where, buried deep in the menu, you'll find information about the current connection. Tap the device icon on the home screen to access the control interface. In the upper right corner, you'll usually see three dots or a gear—this is the access point to the specific gadget's settings.
In the menu that opens, scroll down to the "Device Settings" or "Advanced" section. There you will find the "Network Information" or "Wi-Fi" option. This section displays the name of the current network (SSID) and signal strength. However, simply changing the network is often impossible here—only information or the "Remove Device" button are available, which is the first step to reconnecting.
Some advanced devices, such as robot vacuums or cameras, may have different interfaces. The robot's menu often has a separate "Settings" tab, where the "Reconnect Wi-Fi" button is prominently displayed. This is because vacuum cleaners are often moved between floors or apartments where different routers are used.
- 📱 Open the main app Mi Home and select the desired device.
- ⚙️ Click on the three dots in the upper right corner of the screen to enter the menu.
- 📡 Find the "Network Information" or "Wi-Fi Settings" section in the list of options.
If you plan to change networks frequently, it's worth remembering the path to these settings. For CCTV cameras, this process may require a reset via the physical button on the camera body, after which the app will prompt you to re-pair. Visual indication The connection status will help you understand at what stage the error occurred.
How to change your router or Wi-Fi password
The most common reason for searching Wi-Fi settings is replacing internet equipment. When you change your router, even if you've kept the network name and password the same, smart home devices can get lost. This is because each router has a unique MAC address, and gadgets see that they have connected to other equipment.
The process of changing networks almost always begins with deleting the old device. Go to your device's settings, scroll to the bottom, and select "Delete device." Confirm the action. After this, the device will enter pairing mode (usually the indicator will blink). Now, on the main screen Mi Home Click "+" and follow the instructions to add.
When adding, the app will ask you to select a new Wi-Fi network. Make sure your phone is connected to the network (2.4 GHz or 5 GHz) you want to connect your device to. Most devices Xiaomi They only operate on the 2.4 GHz frequency. If you have a dual-band router, make sure your phone isn't stuck on the 5 GHz band, otherwise finding the device may take a long time or fail.
⚠️ Important: Make sure AP Isolation is not enabled on your router. This feature prevents devices within the local network from communicating, making smart home control impossible.
During setup, the app may request permission to access the local network. This is critical for iOS and newer versions of Android. Without this permission, the phone will not transmit the Wi-Fi password to the smart device. Local area network — is the environment in which the primary configuration occurs.
☑️ Checklist before changing your router
Problems with 2.4 GHz and 5 GHz frequencies
One of the main technical features of the ecosystem Xiaomi is the frequency range requirement. The vast majority of budget and mid-range devices (lamps, relays, sensors) are equipped with Wi-Fi modules that operate exclusively in the frequency range 2.4 GHzThey physically cannot see or connect to 5 GHz networks.
Modern routers often combine both bands into a single network with the same name (the Smart Connect feature). This is convenient for a computer, but smart devices can get confused, trying to connect to a band they're not allowed to, or simply ignore the signal. As a result, you might see an endless search for the device in the Mi Home app.
The solution is to separate the networks at the router level. Give them different names, for example, HomeWiFi And HomeWiFi_5GConnect your phone to the network without a 5G set-top box and configure your devices. If your router doesn't allow you to separate networks, temporarily disabling the 5 GHz band in the router settings while you configure your devices can sometimes help.
| Parameter | 2.4 GHz band | 5 GHz band |
|---|---|---|
| IoT compatibility | Full (basic standard) | Limited (flagships only) |
| Signal range | High (better at breaking through walls) | Low (fades quickly) |
| Transfer speed | Up to 450 Mbps | Up to 1300 Mbps and higher |
| Workload | High (many neighboring networks) | Low |
Also worth mentioning is the protocol WPA3Some new routers use this encryption standard by default, which older Xiaomi devices may not support. If your device stubbornly refuses to connect, try setting the router to mixed mode. WPA2/WPA3 or leave it temporarily only WPA2.
What to do if the router does not separate frequencies?
If your ISP or router doesn't allow you to separate networks, you can try creating a guest network on 2.4 GHz only. Connect your phone to the guest network and try adding a device. This often bypasses Smart Connect restrictions.
AP mode and direct connection of devices
In some scenarios, especially when working with cameras or complex devices, AP (Access Point) mode is used. In this mode, the device itself creates its own Wi-Fi network, which you connect to with your phone to share information about your home router. This is an alternative setup method if standard Bluetooth or local scanning doesn't work.
When switching to AP mode, the device's indicator lights up, and a notification appears in the Mi Home app indicating a new device has been detected in setup mode. You'll need to tap "Connect" and select your home Wi-Fi from the list. Your phone will temporarily disconnect from the internet, switch to the device, transfer the settings, and the device will reboot.
This method is often used if:
1. The device is not within Bluetooth range.
2. The Wi-Fi network is hidden (does not broadcast its name).
3. Errors occur during the standard "Quick Connect" procedure.
If you want to see the device's network again, you will have to perform a factory reset (usually by long-pressing the Reset button). AP mode - This is an emergency or primary configuration channel, not a permanent mode of operation.
⚠️ Important: While transferring settings in AP mode, do not lock your phone's screen or switch to other apps. The password transfer process takes several seconds, and interrupting the screen may stop it.
Diagnostics and Frequently Asked Questions (FAQ)
Even if you follow all the instructions, problems may still occur. Devices may appear "Offline," take a long time to respond to commands, or not appear in the list at all. Often, the problem isn't with the app, but rather with an unstable signal or IP address conflict on the local network.
Use built-in diagnostic tools for troubleshooting. The device profile often includes a connection speed test (especially for cameras). If the signal is weak, try moving the router closer or using a Wi-Fi repeater. Restarting the router itself also helps—a simple but effective way to clear the connection cache.
Below are answers to the most frequently asked questions from users, which will help you resolve common issues without contacting support.
Why does the app say "Device not found" when searching?
Most likely, your phone is connected to a 5 GHz network, but the device is only searching for 2.4 GHz. Switch your phone's Wi-Fi to the correct band. Also, make sure Bluetooth is enabled and the app has permission to use it.
Is it possible to control Mi Home devices without the Internet?
Local control is possible if the phone and devices are on the same Wi-Fi network. However, for initial setup and for scenarios based on time or location, internet access is required. Cameras without internet access will not be able to send notifications.
How to transfer devices to another Mi account?
A direct transfer is not possible. You must remove the device from the old account (or physically reset it using the Reset button) and then re-add it through the new account. This will result in the loss of historical data (such as camera footage).
My device keeps losing Wi-Fi connection, what should I do?
Check if your router limits the number of connected devices. Try reserving a static IP address for the device in the router settings. Also, make sure your Wi-Fi channel isn't overloaded by neighbors (changing the channel in the router settings can help).
In conclusion, finding Wi-Fi settings in Mi Home always involves navigating through a specific device. Understanding this logic allows you to effectively manage the system and quickly reconfigure devices when moving or replacing equipment. Keep an eye on app updates, as the interface may change slightly, adding new diagnostic features.