Where to find your Beltelecom Wi-Fi password: all the methods

Forgot the password for your home Wi-Fi that was issued Beltelecom When connecting? The situation is familiar to many: the password was entered once during the initial setup, and then was stored in the phone or laptop's memory for years. But as soon as you buy a new device or reset the old one, network access is lost. Fortunately, it's possible to recover the password from Beltelecom Wi-Fi There are several ways to do this without contacting support.

In this article you will find 5 working methodsHow to find your router password: from viewing the sticker on the device to extracting data from Windows or Android settings. We'll also explain what to do if standard methods don't work and how to protect your network from hacking after access is restored. All instructions are tailored to the equipment you're using. Beltelecom installs for subscribers in 2026–2026.

Before you move on to practical steps, make sure that you are trying to get the password from his own Connecting to someone else's Wi-Fi network without the owner's permission violates the law of the Republic of Belarus (Article 21.15 of the Code of Administrative Offenses of the Republic of Belarus) and may result in a fine of up to 50 basic units.

1. The password on the router sticker is the fastest way

If you have never changed your Wi-Fi password after having your router installed by a professional Beltelecom, the desired combination can be found on the device itself. Manufacturers print the factory login data on a sticker, which is usually located:

• 📦 On the bottom panel of the router (turn the device over)
• 🖼️ On the back wall (near the ports)
• 📄 Inside the router box (if the documentation is still there)

Look for fields that say:

• Wi-Fi Password, Network Key, Pre-Shared Key - this is the password
• SSID or Wi-Fi Name — the name of your network
• Default Password — password for entering the router settings (not to be confused with Wi-Fi!)

U Beltelecom Most often, routers of the following brands are installed: Sercomm, Huawei, ZTE or TP-LinkOn their stickers the password is usually written as Key or Password and consists of 8–12 characters (numbers + letters in different upper and lower case). For example: A1b2C3d4E5.

⚠️ Note: If you previously changed your password through your account or router settings, the information on the sticker will be invalid. In this case, proceed to the next steps.

2. Password for your Beltelecom account

If the sticker has worn off or the router has been reconfigured, try to find the password in subscriber's personal accountTo do this:

1. Go to the website my.beltelecom.by (log in using your phone number or login/password from the contract).
2. Select a section from the menu Services → Internet.
3. Find the block Wi-Fi settings or Router parameters.
4. The password will be specified in the field Security key or Wi-Fi Password.

If there's no Wi-Fi settings section, your plan doesn't allow remote router management. In this case, use the other methods in this article.

In some cases, the personal account does not display the password itself, but a button Show password or Generate a new oneClick on it—the system will either display the current key or prompt you to create a new one (the old one will be reset).

⚠️ Note: If you click "Generate New Password," all devices will be disconnected from Wi-Fi and will need to reconnect.

3. Password in the router settings (via 192.168.1.1)

If the previous methods did not work, you can view the password directly in router web interfaceTo do this:

1. Connect your computer or phone to the router via cable (via port LAN) or via Wi-Fi (if you remember the old password).
2. Open your browser and type in the address bar 192.168.1.1 or 192.168.0.1 (less often - 192.168.8.1 For Huawei).
3. Enter your username and password to log in. The default is:

If the default credentials don't work, the password has been changed. In this case:

• 🔍 Look at it on the router sticker (field Default Password).
• 📞 Call support Beltelecom by number 123 (for subscribers) and specify your login details.
• ⚙️ Reset your router to factory settings (button Reset on the back panel - hold for 10 seconds).

After successfully logging into the router interface:

1. Go to the section Wi-Fi, Wireless or Wireless network.
2. Select a tab Security (Security).
3. The password will be in the field Password, Key or Pre-Shared Key.

What to do if 192.168.1.1 does not open?

Check the cable connection to the LAN port (not the WAN port!). Disable the VPN or proxy in your browser. Try a different browser (Chrome, Firefox, or Edge). If the router is unresponsive, reboot it (unplug it from the power outlet for 30 seconds).

4. Password in Windows settings (if the computer is already connected to Wi-Fi)

If your laptop or PC already connected to Wi-Fi Beltelecom, but you've forgotten the password, you can retrieve it from your saved Windows networks. To do this:

1. Click Win + R, enter ncpa.cpl and press Enter.
2. Find your Wi-Fi network, right-click on it and select State.
3. Click Wireless network properties → tab Security.
4. Check the box Show entered characters — the password will appear in the field Network security key.

If you have Windows 11, the path is a little different:

1. Open Settings → Network and Internet → Wi-Fi.
2. Click Managing known networks → select your network.
3. Click View network properties and find the password field.

⚠️ Note: Viewing your password requires administrator privileges. If you're using a work computer, access may be restricted by security policies.

5. Password in Android or iPhone settings

Retrieving a saved Wi-Fi password on smartphones is more difficult than on Windows, but it is possible. The methods vary depending on the operating system version.

For Android (version 10 and later):

On most modern phones (eg. Samsung, Xiaomi, Google Pixel) the password can be viewed like this:

1. Open Settings → Wi-Fi.
2. Tap on your network (must be connected!).
3. Click Share or Share (PIN or fingerprint may be required).
4. The password will be displayed under the QR code.

For iPhone (iOS 16 and later):

On iPhone There is no built-in way to view the password, but you can bypass this limitation:

1. Make sure your iPhone is connected to Wi-Fi. Beltelecom.
2. Open Settings → Wi-Fi and tap on the icon i next to the network name.
3. Copy MAC address of the router (field Router).
4. Use a third party app (eg. WiFi Password from the App Store) to extract the password by MAC address.

On Android 9 and later or rooted devices You can use applications like WiFi Password Viewer, but they require special permits and may be unsafe.

6. If nothing helps: reset the router and set it up from scratch

If all the above methods don't work, there is one last option - reset the router to factory settings and configure it again. To do this:

1. Find the button on the back of the router. Reset (usually recessed into the body).
2. Take a paper clip or a toothpick and press and hold the button 10-15 secondsuntil the indicators start flashing.
3. After rebooting the router, connect to it via cable and enter the settings at the address 192.168.1.1 (login/password - admin/admin).
4. Go to the section Wi-Fi and set a new password (we recommend using at least 12 characters with numbers and capital letters).

After reset:

• 🔄 You will have to reconnect all devices to Wi-Fi.
• 📡 You may need to reactivate the Internet (depending on your plan) Beltelecom binds access to the router's MAC address).
• ☎️ If the internet doesn't work, call support at 123 and report the reset.

⚠️ Warning: Resetting your router will delete all personal settings, including port forwarding, parental controls, and guest networks. Make a note of these in advance if you plan to restore them.

Bonus: How to secure your Wi-Fi after recovering your password

Once you finally gain access to the network, we recommend taking security measures to avoid hacking or unauthorized connections:

• 🔒 Change the default password to complex (example: B3lT3l3k0m_2026!WiFi). Use password generators if you have difficulty coming up with a secure combination.
• 🔄 Update your router firmware (chapter System Tools → Firmware Upgrade (in the settings). Outdated versions are vulnerable to attacks.
• 🛡️ Disable WPS (chapter Wi-Fi → WPS). This feature makes connection easier, but also makes it easier to hack.
• 👥 Enable MAC address filtering (chapter Wireless → MAC Filter). This will not provide 100% protection, but it will make it more difficult for unauthorized access.
• 📡 Change the network name (SSID) to neutral (for example, HomeWiFi_123 instead of Ivanov_Family). This hides personal information.

Important: If your router supports the Wi-Fi 6 (802.11ax) standard, enable the mode WPA3 in the security settings. It's more secure. WPA2 and protects against most modern attacks.

Also, check to see if any unauthorized devices are connected to your network. To do this:

1. Go to your router settings (192.168.1.1).
2. Go to the section DHCP → Client List or Wireless Mode → Client List.
3. Review the list of connected devices. Unknown MAC addresses can be blocked.

FAQ: Frequently asked questions about Beltelecom Wi-Fi passwords

Is it possible to find out the Beltelecom Wi-Fi password using a phone number?

No, the operator does not provide Wi-Fi passwords over the phone or via chat. This information is considered confidential and is only available to:

• In your personal account Beltelecom (if the remote control option is enabled).
• On the router sticker (if the password has not been changed).
• In the router settings (192.168.1.1).

If you are unable to access any of the methods, a support specialist (123) can help reset the router settings remotely (personal information confirmation will be required).

What should I do if my Beltelecom router doesn't open 192.168.1.1?

The problem may be:

• Incorrect IP address. Try 192.168.0.1 or 192.168.8.1 (For Huawei).
• No connection. Connect to the router via cable (port LAN).
• Device malfunction. Restart the router (unplug for 30 seconds).
• Blocked by antivirus/firewall software. Temporarily disable them.

If nothing helps, your router may be faulty. Contact support. Beltelecom for diagnostics.

What is Beltelecom's default password?

The factory password depends on the router model:

• Sercomm: usually 8-10 characters (example: A1B2C3D4E5), indicated on the sticker.
• Huawei: last 8 characters of the serial number (SN) or admin.
• ZTE: admin or an empty field.
• TP-Link: admin.

If the password was changed by the technician during installation, it may be different. In this case, check it in your personal account or router settings.

Is it possible to recover a Wi-Fi password if the router burns out?

If the router is physically damaged, it's impossible to recover the password. In this case:

1. Contact us Beltelecom to replace equipment (possibly free of charge under warranty).
2. When connecting a new router, the wizard will set a new password (it can be changed later).
3. If you have a copy of your router settings (backup), you can load it onto your new device.

Without a working router, it is impossible to extract the password—it is stored only in the device's memory.

How often should I change my Wi-Fi password?

Safety recommendations:

• 🔄 Every 3-6 months — if guests or devices with low security (smart bulbs, cameras) connect to the network.
• 🚨 Immediately — if you notice suspicious devices in the list of connected gadgets.
• 🏠 Once a year — for a home network with a minimum number of users.

After changing your password, don't forget to update it on all your devices (TVs, printers, and smart speakers also connect to Wi-Fi!).