It's hard to imagine a modern office or home workspace without a convenient wireless printer that allows you to print documents from any device without getting tangled in wires. Model Epson L355 It is deservedly popular due to its reliability and continuous ink supply system, but initial network setup often presents difficulties for users. Proper configuration wireless connection Provides access to scanning and printing functions directly from tablets, smartphones, and laptops.
In this article, we'll take a detailed look at integrating a printer into your local network, highlighting nuances often overlooked in standard guides. You'll learn how to avoid IP address conflicts, install drivers correctly, and what to do if the device loses connection to the router. Proper setup Epson L355 will ensure stable operation for many years.
Before starting the software, you need to make sure your MFP is physically ready for use. Check the ink levels in the tanks and make sure there's paper in the tray. It's also crucial that your router is working properly, and the computer or smartphone you'll be using to configure it is within range of a strong signal.
Preparatory stage and equipment testing
The first step is to check the compatibility of your router and the printer requirements. Although Epson L355 supports standard protocols, some older router models may require manual configuration of frequency ranges. Make sure you know network name (SSID) and the Wi-Fi password, as they will be needed to enter data into the printer.
Place the printer no more than a few meters away from the router during setup to avoid interference. If the room contains many metal structures or microwave ovens, the signal may be unstable. In this case, interference may interrupt the driver installation process.
⚠️ Attention: Do not attempt to connect the printer to guest Wi-Fi networks or networks with Client Isolation, as in these modes the devices cannot see each other and printing will not be possible.
If you're using MAC filtering on your router, temporarily disable it or whitelist the printer's MAC address. You can find this address by printing a network status report, but we'll cover that later. For now, focus on signal stability.
Resetting the printer's network settings
If the printer was previously connected to a different network or you changed the router, you should clear the old data. This will prevent conflicts and speed up the process of finding a new network. Epson L355 The reset procedure is performed through a combination of buttons on the control panel.
Press and hold the Wireless button (antenna icon) and the Information button (i icon) for a few seconds until the lights flash. This will restore network parameters to factory defaults. After the reset, the Wi-Fi indicator should start blinking, indicating it's ready to pair.
In some cases, if the standard combination doesn't work, you can use the recovery menu via Epson utilities, but the hardware method is more reliable. Make sure the printer isn't in "Deep Sleep" mode before starting the procedure.
☑️ Pre-reset check
WPS method: quick connection without entering a password
The easiest way to establish a connection between a router and an MFP is to use technology WPS (Wi-Fi Protected Setup)This method allows you to transmit the password automatically, eliminating the need to manually enter it on a small screen or using buttons. Your router must support this feature, which is true for most modern models.
Press the WPS button on your router. It's usually marked with a WPS abbreviation or an icon with two arrows. Then, press and hold the Wi-Fi button on the printer within two minutes. Epson L355 until the indicators start flashing orange and green alternately.
The connection process can take up to two minutes. If the Wi-Fi indicator turns solid green, the connection is successful. If the indicator flashes green, the connection is in progress, and if it turns orange, an error has occurred.
What to do if WPS doesn't work?
Some ISPs or router models block the WPS function for security reasons. In this case, use the software configuration method via the driver or the Epson iPrint mobile app.
Setup via a computer using EpsonNet Install
If automatic methods do not work, the most reliable option is to use a specialized utility. EpsonNet InstallThis program is included in the full driver package, which can be downloaded from the manufacturer's official website. Run the installation and select "Wireless Setup."
The program will prompt you to select a connection method. Select "Automatic" or "Dedicated" if the network is hidden. The utility will automatically find the printer within range and offer to share your Wi-Fi settings with it. During the installation process, you may be asked to temporarily connect. Epson L355 to the computer via a USB cable.
Once the settings have been transferred, the cable can be disconnected. The program will perform a test print to ensure that communication protocols are working correctly. If the test passes, the printer is ready to work on the network.
| Wi-Fi indicator | Wi-Fi Direct indicator | Connection status | Action |
|---|---|---|---|
| It's green | Turned off | Connected to the network | Printing is available |
| Flashing green | Turned off | Search for network / Connect | Wait for completion |
| It's glowing orange | Turned off | Connection error | Check your password/SSID |
| Flashing green | Flashing green | Setup mode | Run the installation utility |
⚠️ Attention: Antivirus programs or Windows firewalls may be blocking the EpsonNet installer. It is recommended to temporarily disable network protection during setup.
Using the Epson iPrint app for mobile devices
Epson has developed an application for smartphone and tablet owners. Epson iPrint, which greatly simplifies print management. Available for iOS and Android, the app lets you print photos and documents directly from your gallery or cloud storage.
Launch the app and select your printer from the list of available devices. If the printer isn't already configured, the app will prompt you to run the Wi-Fi setup wizard. Follow the on-screen instructions, selecting your network and entering the password. This is a convenient method that doesn't require any setup. desktop computer.
The app's functionality also allows you to monitor ink levels and print head status. Regular checks are available via Epson iPrint helps to notice in time the need to clean the nozzles, which prevents the ink from drying out.
It's important to note that for the mobile app to work, both devices must be on the same subnet. If you have a complex network infrastructure with multiple access points, ensure there is no isolation between clients.
Diagnosis and solution of typical problems
Even with proper configuration, problems may still occur. Often, the problem lies in the printer's IP address being dynamically changed by the router. To avoid this, it is recommended to reserve static IP For Epson L355 in the router settings, linking it to the MAC address of the device.
If your printer stops responding, try rebooting both the printer and the router. The order is important: first, turn on the router and wait until it fully boots up, then turn on the printer. This will allow the device to correctly obtain network parameters upon startup.
If you're experiencing frequent connection drops, check if you're using power-saving mode on your router, which can disable the Wi-Fi module during low-activity hours. Also, make sure your router's firmware is updated to the latest version.
Secret check
Print a Network Status Sheet to see the signal strength in dBm. A value above -70 dBm is considered good, while a value below -80 dBm indicates a weak and unstable signal.
Frequently Asked Questions (FAQ)
Can Epson L355 be connected to a 5GHz network?
No, model Epson L355 Only supports the 2.4 GHz wireless standard (802.11b/g/n). If your router broadcasts networks with the same name for both bands, try separating them or forcing the router into compatibility mode.
How to find out the IP address of a printer?
The easiest way is to print a network status report by holding down the "i" (information) button on the printer's control panel for a few seconds. The IP address is also displayed in the printer properties window in Windows or macOS.
The printer sees the network, but says "Connection error." What's wrong?
Most often, the problem is an incorrect password or the use of special characters that the printer can't process. Try changing the router password to only letters and numbers and repeat the setup procedure.
Do I need a USB cable to set up Wi-Fi?
Not always. When using the WPS method or setting up via a mobile app, a cable is not required. However, if automatic network detection fails, the EpsonNet Installer may require a temporary cable connection for the initial settings transfer.