Owners of wide-format inkjet printers Canon iX6840 often face the need to switch the device to wireless mode for convenient printing from various gadgets. Initial setup wireless connection It may seem complicated due to the lack of a full-size display on the device, but following the steps sequentially guarantees a successful result. Modern network security requirements dictate their own rules, so it's important to choose the right synchronization method.
The setup process depends on the operating system of your computer or smartphone, as well as the firmware version of the printer itself. Wi-Fi module This model supports IEEE 802.11 b/g/n standards, ensuring stable data transfer for large photo printing volumes. Before using the router, make sure you know your home network password and are in an area with strong signal strength.
In this article, we'll cover all available network activation methods in detail, including using the WPS button, USB cable setup, and mobile apps. Proper configuration will allow you to print directly from phones and tablets without the need for third parties. A critical step is to select the WPA2-PSK (AES) encryption method in the router settings, as older WEP protocols may not be supported by the driver.
Equipment preparation and compatibility testing
Before proceeding with the software part, you need to make sure that the physical part is ready Canon iX6840 Ready for operation. The printer must be plugged in, and the cartridges and paper must be in the appropriate trays. The power indicator light should be solid and not blinking to indicate an error or warm-up process.
It's important to check your router's compatibility with the printer's requirements. While the device supports modern standards, some older router models may conflict with the printer's network module at certain frequency settings. It's recommended to temporarily disable the "Guest Network" feature on your router if you're having trouble detecting the device.
- 📶 Make sure that your router is broadcasting a signal in the 2.4 GHz range, as Canon iX6840 does not support 5 GHz networks.
- 🔌 Check the integrity of the USB cable if you plan to perform initial setup via a computer.
- 📱 Charge your mobile device or laptop to avoid interruptions during the driver installation process.
⚠️ Attention: If your router uses the "Smart Connect" feature (combining 2.4 GHz and 5 GHz networks under a single name), the printer may not connect. Temporarily separate the networks in the router settings or create a guest profile for only the 2.4 GHz band.
WPS method: quick synchronization without a password
The easiest way to tie Canon iX6840 to the home network is the use of technology WPS (Wi-Fi Protected Setup). This method allows you to transfer network information automatically, without having to manually enter a complex password on your computer. To implement this method, your router must also support this feature and have a corresponding physical or software button.
Click the button Wi-Fi on the printer control panel. The wireless network indicator will start blinking. Then, within two minutes, press the WPS On your router. If there's no physical button on your router, access its web interface through a browser and activate WPS programmatically.
Once paired successfully, the Wi-Fi indicator on the printer will stop flashing and turn solid. This means that IP address The printer is received and ready to use. A computer on the same network will automatically detect the printer when searching for new hardware.
What to do if WPS doesn't work?
If the indicator continues to blink or turns orange, the connection is not established. Try moving the printer closer to the router, disable VPN on your computer, and ensure that the router isn't configured to block new devices by MAC address. WPS may also not work if your network uses Enterprise encryption.
Setup via USB cable and computer
If the automatic WPS button is unavailable or doesn't work, the most reliable method is wired setup. You'll need an installation disc or a driver downloaded from the official website. Canon iX6840Connect the printer to your computer via USB cable before starting the installation.
During the driver installation process, select "Wireless LAN connection" or "Wi-Fi connection." The installer will automatically offer to transfer network settings from your computer to the printer. This is especially convenient if you don't know the exact network name or the password contains complex characters.
Once the setup is complete, the program will prompt you to disconnect the USB cable. Network parameters will remain in the device's memory even after the power is turned off. Now you can print from any device on the local network.
☑️ Installation Preparation Checklist
Using the Canon PRINT Inkjet/SELPHY app
For smartphone and tablet users, the best solution is a proprietary app. Canon PRINT Inkjet/SELPHYAvailable for iOS and Android, it allows you to not only print but also perform initial printer setup. Launch the app and follow the on-screen prompts to add a new device.
The app uses Bluetooth or a direct Wi-Fi connection to transfer data from your home network to the printer. This is a modern and convenient method that doesn't require a computer. Make sure location services and Bluetooth are enabled on your smartphone for the search function to work correctly.
Once successfully connected, you'll be able to scan documents, check ink levels, and order supplies directly from the app interface. Mobile printing becomes especially relevant for quickly printing photos from social networks.
| Parameter | Meaning / Description | Impact on work |
|---|---|---|
| Signal frequency | 2.4 GHz | Provides long range but can be noisy |
| Security protocol | WPA2-PSK (AES) | Security standard required for connection |
| Opening hours | Infrastructure | Connecting through a router, not directly to the device |
| Transfer speed | up to 54 Mbps | Enough to print 10x15 photos in 20-30 seconds |
Solving common connection problems
Despite the simplicity of the procedure, sometimes failures occur when The Canon iX6840 can't see the network or can't obtain an IP address. This is often due to router settings, which may limit the number of devices that can connect or enable MAC address filtering. Check the client list in the router's admin panel.
Another common cause is a mismatch in regional settings or using a static IP that conflicts with the printer's address. Try resetting the printer's network settings to factory defaults by holding down the Wi-Fi until the indicator color changes.
If all else fails, update your printer's firmware. Manufacturers periodically release updates that improve compatibility with new router models. This may require a temporary wired connection.
⚠️ Attention: Antivirus programs and firewalls on your computer may block the printer from being detected on the network. It's recommended to temporarily disable protection or add an exception for Canon services during setup.
Setting up printing from mobile devices (AirPrint and Android)
Once successfully connected to Wi-Fi, your printer becomes accessible to technology AirPrint (for Apple) and Mopria (for Android). These protocols do not require installing additional drivers on smartphones if they are on the same network.
For iPhone owners, simply select a photo or document, tap "Share" and select a printer. Canon iX6840The system will automatically detect the device. On Android, a similar function is built into the standard print menu, which can be activated in the system settings.
Print quality from mobile devices is just as good as on a computer, as image processing is done on the printer. You can select the paper type and print size directly from your smartphone's interface before sending a job.
Cloud Printing
You can also register your printer with the Canon PRINT Cloud service. This will allow you to print documents from anywhere with internet access by simply sending an email to your printer's dedicated email address.
Frequently Asked Questions (FAQ)
Can the Canon iX6840 be connected to a hidden Wi-Fi network?
Yes, this is possible, but automatic detection will not work. You will need to use the USB cable and computer setup method, where you can manually enter the hidden network name (SSID) in the appropriate field of the driver installation wizard.
My printer stopped responding to Wi-Fi after changing my router. What should I do?
You need to reset the printer's network settings. Press and hold the button Direct (or the button combination specified in the LAN reset instructions) until the indicator light flashes. Then, reconnect using any of the methods described above.
Does this model support duplex printing over a network?
Yes, Canon iX6840 Supports automatic duplex printing when connected via Wi-Fi. This feature is available in the PC driver and mobile apps, but it reduces print speed by approximately half.
What is the maximum Wi-Fi range of this printer?
The range depends on the power of your router and the obstacles in the room. In a standard apartment with concrete walls, strong reception is typically maintained at a distance of 10-15 meters from the signal source. For larger spaces, a Wi-Fi repeater may be required.