Owners of budget Windows-based tablets often face the need to reinstall the operating system. Model 4good T101I WiFi 32GB is no exception, especially given its compactness and versatility. This device runs on processors Intel Atom, capable of performing the tasks of a full-fledged PC, but requires proper configuration. Often, reinstallation is caused by the accumulation of system junk or a virus infection.
Restoring your gadget's functionality may seem complicated to the untrained user. However, by following a clear sequence of steps, you can bring your device back to life in a couple of hours. It's important to understand that x86** architecture in combination with UEFI And Secure Boot imposes certain limitations. In this article, we'll cover all the nuances so you can successfully install a fresh copy of the OS.
Before you begin, make sure you have a stable internet connection and a charged battery. Your tablet should have sufficient power, as the flashing and installation process requires power. We'll cover a clean installation method, which ensures all previous configuration errors are removed. This is the most drastic, but also the most effective, method.
Preparing bootable media
The first step is to create a bootable USB drive, as built-in recovery tools on tablets of this class are often absent or limited. You'll need a USB drive with a capacity of at least 8 GB. It's important to choose a high-quality device to avoid read errors when copying files. Write speed directly impacts the amount of time you'll spend waiting.
⚠️ Warning: Creating a bootable USB drive will completely erase all data from the USB drive. Please copy important files to another drive or cloud storage beforehand to avoid permanent loss.
To create a bootable image, it is best to use the official utility Media Creation Tool from Microsoft or third-party software like RufusThe second option is often preferable for older devices, as it allows for flexible partition structure configuration. In the partition scheme settings, be sure to select GPT, and specify the target system as UEFI (non CSM)This is critical for proper operation. Secure Boot.
After the files are written, check the integrity of the image. Sometimes files are written with errors, which causes the image to freeze during the boot process. If you are using RufusWait until the "Ready" status appears and only then remove the drive. You now have a key tool for system recovery.
☑️ Preparing for installation
BIOS setup and boot
The next step is to enter the interface. BIOS/UEFIOn tablets 4good T101I This is done with a key combination at startup. Usually, you need to hold down the volume up button (Volume Up) and the power button simultaneously. Hold them for a few seconds until the manufacturer's logo or setup menu appears.
In the BIOS menu you need to find the section responsible for booting (Boot). Here you should disable the option. Secure BootIf the system complains about the bootloader's digital signature, although this is rarely required for official Windows images. Also, make sure your USB drive is set as the boot priority. If the flash drive isn't showing up, try reconnecting it to a different port via an OTG cable.
What to do if the BIOS doesn't recognize the flash drive?
If the flash drive doesn't appear in the list of bootable devices, try formatting it to FAT32 instead of NTFS. Many UEFI systems on tablets cannot read the NTFS file system during pre-boot. Also, check whether Legacy/CSM mode is enabled, although pure UEFI is preferable for Windows 10.
After making changes, save the settings, this is usually done by pressing the key F10 or by selecting an item Save & ExitThe tablet will reboot, and if everything is done correctly, the Windows installation process will begin. The screen may flicker or go black for a few seconds—this is normal. Just be sure not to interrupt the power during this process.
The process of installing the operating system
When the bootloader starts, you'll see a language selection screen. Select Russian and click "Install." When entering the product key, you can select "I don't have a product key" if you plan to activate the system later or if it's already locked to the hardware. The Windows 10 license is often "hardwired" into BIOS tablet, and activation will occur automatically when connected to the Internet.
Next, select the "Custom: Install Windows only" installation type. This will allow us to clean up the disk of old junk. You will see a list of partitions. 4good T101I It's common to have several small system partitions. Delete all partitions until only "Unallocated space on disk 0" remains.
| Section type | Size | Action |
|---|---|---|
| Recovery partition | ~400-800 MB | Delete |
| System (EFI) | ~100-300 MB | Delete |
| Basic | ~28-29 GB | Delete |
| Unoccupied space | The entire volume | Create a new one |
After the disk is cleaned, click "Next". The files will begin copying. On tablets with eMMC This process can take 30 to 60 minutes. Don't be alarmed if the tablet reboots several times. After the final reboot, the system will prompt you to configure privacy settings and create an account.
Installing drivers for the 4good T101I
A freshly installed Windows 10 may not function correctly without specific drivers. The touchscreen, automatic screen rotation, or sound often don't work. Drivers for 4good T101I based on the chipset Intel Atom (usually Z3735F). They can be found on the manufacturer's official website or on specialized forums.
First of all, install the chipset and video adapter drivers. Intel HD GraphicsWithout them, the interface will run slowly, and the screen resolution may be incorrect. Then come the audio drivers (usually Realtek or Intel SST) and touchscreen (often Goodix or Silead). If the touchscreen doesn't work, temporarily use a USB mouse.
Installing WiFi drivers may require connecting via USB modem or transferring a file via OTG, as the built-in module may not be detected immediately. After installing all components, reboot the device. Check the Device Manager: there should be no unknown devices with yellow exclamation marks.
Optimizing tablet performance
After installing all the drivers, the system is ready to work, but it can be... Tablets based on Intel Atom Sensitive to the number of background processes. Disable unnecessary services, visual effects, and apps you don't plan to use. This will free up resources. RAM and processor.
It's recommended to disable automatic Windows updates or configure them manually to prevent the system from trying to download heavy packages in the background, slowing down performance. It's also worth checking your power settings. In the power plan, select "High Performance" if you plan to run on AC power, or "Power Saver" for battery-powered operation.
⚠️ Note: The interface and available options in the power settings may vary depending on the BIOS version and installed power management drivers. If you don't see the default settings, check for a power management utility from your tablet manufacturer.
Don't forget to install antivirus protection, even if it's built-in Windows DefenderLow-end devices are often targeted by miners, which can surreptitiously load the processor. Regularly clearing temporary files will also help maintain acceptable performance.
Frequently Asked Questions (FAQ)
Where can I get an activation key for Windows 10?
Activation key for 4good T101I It's usually hardcoded into the BIOS/UEFI. If you install the same version (Home or Pro) that originally came with the system, activation will occur automatically when connected to the internet. If the key can't be read, it can be found on a sticker under the back cover or in the documentation, if you have it.
Why doesn't the touchscreen work after installation?
This is a driver issue. Standard Microsoft drivers may not support the multi-touch controllers used in tablets. You need to find and install drivers for the touchscreen controller (often Silead or Goodix) specifically for your model.
Can I install Windows 11 on this tablet?
Official processors Intel Atom Z3700 series are not supported by Windows 11 due to missing module TPM 2.0 and poor performance. Installation is only possible by bypassing the restrictions, but the system will run extremely slowly and unstable. It is recommended to stay on Windows 10.
How to enter BIOS if the buttons are not responding?
If the volume buttons don't work, you can try entering the BIOS through Windows itself. Go to Settings → Update & Security → Recovery and select "Restart now" under "Advanced startup". Then go to Troubleshooting → Advanced Options → UEFI Firmware Settings.